Etisalat 3GT1WNE Manual de usuario
Etisalat 3G Travel Router
Etisalat
3G Travel Router
Li-ION
Battery
1 wired
connection
USB 2.0
3G WAN
Our service Etisalat 3G Travel Router
Contents
1. Hardware installation 1
2. Connecting your device 2
3. Establishing a Wireless connection 4
4. Establishing a WAN connection 5
5. Establishing a LAN connection 9
6. Charging your battery 10
7. Completed 11
Our service Etisalat 3G Travel Router
1. Gently insert the supplied battery into the battery compartment on the back of the
3G Router.
2. Connect the supplied power adapter to a wall power outlet and to the Micro USB
port of the 3G Router to charge the battery. The battery is fully charged when the
Power LED lights up solid green.
3. Switch the 3G Router on and wait for around 2 minutes to allow the device to power up.
Hardware installation
1
01
You can use the 3G Router to create a Wireless Local Area Network (WLAN) to provide
Internet access to wireless-enabled devices.
Using the 3G Router with a 3G Mobile Broadband Internet Service
• Connect a compatible 3G USB Modem to the 3G USB port of the 3G Router.
• The 3G Router will automatically attempt to detect the connection details from the
SIM card of your 3G USB Modem. Simply wait for 2 minutes to allow the 3G Router
to apply the settings.
• If the 3G APN1connection details were successfully detected, you will now be able
to access the Internet.
Connecting your device
2
Note: Please refer to the ‘Setting up your 3G Router’ section in the User Guide (on the CD) if you
have any problems connecting to the Internet, or if:
•Your SIM card requires a PIN code
•Your 3G broadband Internet service provider requires you to input the username/
password for your 3G connection
•You wish to use other alternate 3G connection details (such as a special APN1)
1APN stands for Access Point Name
02
Our service Etisalat 3G Travel Router
WiFi PDA
Laptop
USB Modem
3G Tower
WiFi phone
03
1. Using your wireless-enabled device, scan the wireless networks in your area and
select the network called Etisalat Travel Router, then click connect.
2. Enter the following default security key: 3GT1WNE0
Note: For optimal wireless security, we recommend that you change the default settings through the web
interface. For more details, please consult the User Guide located on the supplied CD.
Establishing a
Wireless connection
3
04
Our service Etisalat 3G Travel Router
Establishing a WAN
connection
Using the 3G Router with a fixedline Broadband Internet Service (DSL/Cable)
• Connect your DSL or cable modem with the supplied Ethernet cable to the WAN/LAN
port of your 3G Router
• On your computer, open a web browser (such as Internet Explorer, Firefox, or Safari)
and type in 192.168.20.1 into the address bar
• At the login screen, type ‘admin’ into both the username and password elds. Then
click submit
• Move your mouse over Internet Settings and click on WAN
• Select your WAN connection type from the drop box
4
Contd. on pg. 8
05
ADSL Modem
WiFi PDA
Laptop
WiFi phone
06
Our service Etisalat 3G Travel Router
07
Otros manuales para 3GT1WNE
2
Tabla de contenidos
Idiomas:
Otros manuales de Enrutador inalámbrico de Etisalat
