R E M O T E M O N I T O R I N G M A D E E A S Y !
Intr ducti n
RMS-200 Is a unique remote monitoring, data acquisition, and control device
specificall designed for use with Batter powered wireless internet repeater sites, or
other AC & DC powered remote equipment
RMS-200 Has ultra low power consumption and won't put a drain on our power
source. Uses less than 2 watts.
RMS-200 Is powered b DC voltage from 10 to 60 volts.
RMS-200 Uses embedded Ethernet technolog for internet data acquisition and
remote voltage monitoring.
RMS-200 Uses the LINUX operating s stem for versatilit , stabilit , and securit .
RMS-200 Gives ou the situational awareness ou need to keep our equipment
operational and reliable.
P ssible Applicati ns
A/C r Battery P wered Micr wave, Teleph ny, Netw rk Equipment
Use RMS-200 to monitor batter levels, room temperature, signal strength (RSSI) on
radios and more. RMS-200 has 6 onboard isolated voltmeters giving it the abilit to
measure DC voltage from -100 to +100 volts with 24 bit accurac . RMS-200 also has
3 power rela s giving it the unique abilit to turn on/off devices remotel using an
Internet connection. Use the power rela s to remote start a generator. RMS-200 has 5
dedicated input pins used for door alarms or to monitor motion sensors. RMS-200 has
a full featured serial port, control modems, cell phones, gsm modules, and other
devices that use serial communication. RMS-200 has two USB 2.0 ports that supports
several USB devices concurrentl using a USB hub. Control USB cameras, store data
on USB flash drives, control USB speakers etc. RMS-200 has input and output pins
used to control our own custom devices. RMS-200 can alert ou via email or SMS
messages when our batter bank is low. RMS-200 has ping monitor software that
allows ou to monitor network devices and alert ou to failure and possibl power
c cle the device. Monitor all this information remotel over an Internet connection
using an ordinar web browser. RMS-200 gives ou direct hardware control of fans,
lights, computers, cameras, modems, radios, etc... No more guessing what our
batter levels are. No more wondering if our signal strengths are at an acceptable
level. No more long drives to reset a fuss radio. Let RMS-200 do this all remotel via
the Internet.
1
