ETC Hammerhead HG12 Instrucciones de instalación
HG12 Winch
HG12_Winch_o1_03
Serial No. 96095 and up
Order No. OM1001
TM
Operator’s and Maintenance Manual
Introduction
INTRODUCTION
This manual explains the proper operation of your machine. Study and understand these instructions thoroughly before operating or
maintaining the machine. Failure to do so could result in personal injury or equipment damage. Consult your HammerHead dealer if
you do not understand the instructions in this manual, or need additional information.
The instructions, illustrations, and specifications in this manual are based on the latest information available at time of publication.
Your machine may have product improvements and features not yet contained in this manual.
Earth Tool Company LLC reserves the right to make changes at any time without notice or obligation.
Operation and maintenance instructions are included in the Operator’s Manuals provided with the machine. The
tethered (cabled) manual must remain attached to the machine for ready reference. Store it in the manual storage box when not in
use.
Additional copies of the manuals are available from your dealer. Use the reorder number on the front cover to order additional
manuals.
Copyright © 2003 All rights reserved.
Earth Tool Company LLC
P. O. B ox 3
Oconomowoc, WI 53066
HG12 Winch -5
HAMMERHEAD MOLE®, and HAMMERHEAD™ are trademarks of Earth Tool Company, LLC.
NOTE: Right and left sides of the machine are determined by facing in the direction of forward travel.
-6 HG12 Winch
PATENTS
This machine may be covered by one or more of the following patents:
(Other U.S. and foreign patents pending.)
US 5,025,868 US 5,199,151 US 5,487,430 US 5,317,953 US 5,465,797
US 5,440,797 US 5,494,116 US 5,505,270 US 5,603,383 US 5,651,639
US 5,687,803 US 5,782,311 US 6,148,935 US 6,171,026 B1 US 6,260,634 B1
US 6,261,027 B1 US 6,263,983 B1 US 6,269,889 B1 US 6,273,201 B1 US 6,283,229 B1
US 6,302,410 B1 US 6,299,382 B1 US 5,337,837 US 6,321,858 B1 US 6,390,207 B2
US 6,371,223 B2 US 6,390,087 B1
HG12 Winch -7
HAMMERHEAD EQUIPMENT LIMITED WARRANTY
EARTH TOOL COMPANY LLC, hereinafter sometimes referred to as ETC warrants each new industrial product of its own manufacture to be free from
defects in material and workmanship, under normal use and service for one full year after delivery to the owner or 1000 operating hours, whichever occurs
first. During the warranty period, the authorized selling HammerHead Dealer shall furnish parts without charge for any HammerHead product that fails
because of defects in material and workmanship. Warranty is void unless warranty registration card is returned within ten days from the date of purchase.
This warranty and any possible liability of Earth Tool Company LLC hereunder is in lieu of all other warranties, express, implied, or statutory, including, but
not limited to any warranties of merchantability or fitness for a particular purpose.
The parties agree that the Buyer’s SOLE AND EXCLUSIVE REMEDY against ETC, whether in contract or arising out of warranties, representations, or
defects shall be for the replacement or repair of defective parts as provided herein. In no event shall ETC’s liability exceed the purchase price of the product.
The Buyer agrees that no other remedy (including, but not limited to, incidental or consequential loss) shall be available to him. If, during the warranty period,
any product becomes defective by reason of material or workmanship and Buyer immediately notifies ETC of such defect, ETC shall, at its option, supply a
replacement part or request the return of the product to its plant in Oconomowoc, Wisconsin. No part shall be returned without prior written authorization
from ETC, and this warranty does not obligate ETC to bear any transportation charges in connection with the repair or replacement of defective parts. earth
Tool Company LLC will not accept any charges for labor and/or parts incidental to the removal or remounting of parts repaired or replaced under this
Warranty.
This Warranty shall not apply to any part or product which shall have been installed or operated in a manner not recommended by ETC nor to any part or
product which shall have been neglected, or used in any way which, in ETC’s opinion, adversely affects its performance; nor negligence of proper
maintenance or other negligence, fire or other accident; nor with respect to wear items; nor if the unit has been repaired or altered outside of an ETC
authorized dealership in a manner of which, in the sole judgment of ETC affects its performance, stability or reliability; nor with respect to batteries which are
covered under a separate adjustment warranty; nor to any product in which parts not manufactured or approved by ETC have been used, nor to normal
maintenance services or replacement of normal service items. Equipment and accessories not of our manufacture are warranted only to the extent of the
original Manufacturer’s Warranty and subject to their allowance to us, if found defective by them.
ETC reserves the right to modify, alter, and improve any products or parts without incurring any obligation to replace any product or parts previously sold with
such modified, altered, or improved product or part.
No person is authorized to give any other Warranty, or to assume any additional obligation on ETC’s behalf unless made in writing, and signed by an officer
of ETC.
EARTH TOOL COMPANY LLC
Oconomowoc, Wisconsin
This page intentionally left blank.
HG12 Winch Receiving and Delivery Report i
Receiving and Delivery Report
DEALER PREP
Check or perform the following:
___ Check machine for shortage or damage in transit.
Engine
___ Check the coolant level/anti-freeze mix.
___ Check the oil level of the engine.
___ Check the battery electrolyte level and charge.
___ Check the condition of the air cleaner.
___ Check the engine for proper operation.
Hydraulics
___ Check the level of the hydraulic fluid.
___ Check all hydraulic components for leaks or damage.
Winch
___ Check the level of the oil in the gear boxes.
ii Receiving and Delivery Report HG12 Winch
General
___ Check the alternator/fan belt for proper tension.
___ Check all shields for installation and condition.
___ Check the machine for proper lubrication.
___ Check the wheel lug nuts for tightness, 90-95 ft-lb (122-130 Nm).
___ Check the tires for proper air pressure, 75 psi (5.1 bar) maximum.
___ Check the condition of all decals.
___ Check the operation of the taillights.
___ Check that the safety towing chains are installed.
___ Check that break-away brake switch is installed and functions.
___ Check all phases of operation.
___ Complete “Dealer/Customer Information”, page iii.
___ Complete “Identification Numbers - Record”, page iv.
HG12 Winch Receiving and Delivery Report iii
DEALER/CUSTOMER INFORMATION
dealer owner
address address
city city
state / province state / province
zip / postal code zip / postal code
country country
iv Receiving and Delivery Report HG12 Winch
IDENTIFICATION NUMBERS - RECORD
Machine Identification Numbers
Model Number
Serial Number
Engine Identification Numbers
Model Number
Serial Number
Tabla de contenidos
Otros manuales de Cabrestante de ETC
