ETC Mosaic 5 Manual de usuario

ETC Installation Guide

Mosaic 5" and 8" Touchscreen

Corporate Headquarters nMiddleton, WI, USA |+1 608 831 4116

Global Offices nLondon, UK |Rome, IT |Holzkirchen, DE |Paris, FR |Hong Kong

Web etcconnect.com |Support support.etcconnect.com

Trademark and patent info: etcconnect.com/ip |Product information and specifications

subject to change. ETCintends this document to be provided in its entirety.

7180M2161 Rev B Released 2023-09

Overview

M-TS5 M-TS8

The Mosaic Touchscreen is a

wall-mounted touchscreen

controller that is available in

5" and 8" models. The

touchscreen provides

dynamic control of your

Mosaic system using faders,

buttons, color pickers, and

more.

The graphic touchscreen display configuration is designed using Mosaic

Designer Software (v2.9 and later) and can be customized to meet your

installation needs.

Mounting

8”

Mounting

Plate

5”

Mounting

Plate

Each touchscreen ships

with a mounting plate and

region-specific hardware

for installation to a

standard US/EU/UK back

box in either portrait or

landscape orientation. A

surface-mount back box is

available separately.

Model A B C D

5" Mounting

Plate

US 1-gang

Back Box

A- 83 mm

(3.3in)

UK 1-gang

Back Box

B- 60 mm

(2.4in)

EU 1-gang

Back Box

C- 60 mm

(2.4in)

UK 2-gang

Back Box

D- 120 mm

(4.75 in)

8"Mounting

Plate

US3-gang

Back Box

A1 - 92 mm

(3.6 in)

A2 - 83 mm

(3.3 in)

EU 2-gang

Back Box

B1 - 71 mm

(2.8 in)

B2 - 60 mm

(2.4 in)

US 2-gang

Back Box

C- 46 mm

(1.8in)

UK 2-gang

Back Box

D- 120 mm

(4.75 in)

ETC Installation Guide

5" and 8" Touchscreen

Vertical mounted back box

(portrait operation)

Horizontal mounted back box

(landscape operation)

US 1-gang back box shown in both portrait and landscape orientation.

Environment

• For dry location use only, ambient temperature 0°C–50°C

(32°F–122°F)

• Humidity 10%–95% (non-condensing)

Electrical

The touchscreen is powered by Power-over-Ethernet (PoE 802.3af).

Astandard PoE switch (provided by others) not exceeding 15W may be

used to provide both power and a network connection to the touchscreen

using an Ethernet cable. All Ethernet terminations must follow IEEE 802.3

and be terminated to the T568B standard.

If a PoE switch is not available, a compliant PoE midspan injector may be

used alternatively. The touchscreen operates as a PoE Class 0 (zero)

device (0.44–12.95W) and consumes 7W maximum.

Note:

Power must not be disconnected during

bootloader/firmware updates to the unit as corruption of the data

or software may occur, perhaps even rendering the unit

inoperable.

5" and 8" Touchscreen Page 2 of 4 ETC

ETC Installation Guide

5" and 8" Touchscreen

Installation

1. The touchscreen universal mounting plate installs to a flush-mount

or surface-mount back box in either the portrait or landscape

orientation. The 5" touchscreen requires a standard 1-gang back

box and the 8"touchscreen requires a standard 2-gang back box.

Note:

All flush-mount installations require a back box with a

minimum of a 49mm hole. Use the appropriate mounting

hardware for your installation back box (UNC 6-32 screw for US

back box, M3.5 flat head screw for UK back box, or M3 hex head

screw for EU back box).

2. Connect the Ethernet cable to the RJ45 port receptacle on the rear

panel of the touchscreen.

3. Attach the touchscreen to the mounting plate.

a. Angle the touchscreen to the mounting plate at a 10 degree

clockwise angle where the keyholes on the touchscreen are

aligned to the locating lugs on the universal mounting plate.

Ethernet CAT5

10°

Locating

Lugs (x4)

b. Once all located lugs are seated to the touchscreen, rotate the

touchscreen 10 degrees counterclockwise, securing it in place.

5" and 8" Touchscreen Page 3 of 4 ETC

ETC Installation Guide

5" and 8" Touchscreen

Service

Lnk/Dat

Pwr/Act

10/100 TX PD

ETHERNET

10 W MAX

Reset

Button

Ethernet

MicroSD

Memory Card

Remove Touchscreen

1. To remove the touchscreen from the universal mounting plate,

gently pull the short sides of the touchscreen toward you and rotate

it 10 degrees clockwise.

2. Remove the touchscreen from the locating lugs.

3. Disconnect the Ethernet cable from the RJ45 port.

Memory Card

The touchscreen ships with a 32GB MicroSD Memory Card installed. In

the event of touchscreen hardware failure, you can simply move the

memory card into a replacement touchscreen that is running compatible

(same or later) firmware to resume operation.

Reset Button

Reset the touchscreen hardware by removing the device from the

mounting plate (see

Remove Touchscreen above

) and pressing the

recessed reset button located on the rear panel.

Note:

Do not reset the hardware during a bootloader/firmware

update as corruption of the data or software may occur, perhaps

even rendering the touchscreen inoperable.

Watchdog

An internal "watchdog" will automatically reset the touchscreen in case

of a software crash as a result of either a software defect or a random

electromagnetic event, such as a power brownout or power spike, a

nearby lightning strike, or static discharge.

5" and 8" Touchscreen Page 4 of 4 ETC

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pantalla táctil de ETC

ETC

ETC PARADIGM Manual de usuario

ETC

ETC Unison Paradigm P-TS7 Manual de usuario

ETC

ETC Unison Paradigm P-TS7 Manual de usuario

ETC

ETC Paradigm Portable Touchscreen Manual de usuario

ETC

ETC Unison Paradigm P-TS7 Manual de usuario

ETC

ETC Paradigm P-TS7-E Manual de usuario

ETC

ETC Paradigm P-LCD Series Manual de usuario

ETC

ETC Unison Paradigm P-TS7 Manual de usuario

ETC

ETC Unison Paradigm P-LCD-FBB Manual de usuario

ETC

ETC Mosaic 5 Manual de usuario

Manuales populares de Pantalla táctil de otras marcas

Elecro Engineering

Elecro Engineering Poolsmart Plus Instrucciones de instalación

Johnson Controls

Johnson Controls IQ4 HUB Manual de usuario

Elo TouchSystems

Elo TouchSystems ET2270L Manual de usuario

Elo TouchSystems

Elo TouchSystems ET1002L Manual de usuario

Elo TouchSystems

Elo TouchSystems 3201L Manual de usuario

Duratec

Duratec S15 Manual de usuario

Crestron

Crestron TPMC-3SM Manual de usuario

Racelogic

Racelogic MFD Touch Manual de usuario

J2 580 Guía del usuario

HAI

HAI OmniTouch 10p Manual de usuario

panel

panel PC PSR108-FM Series Manual de usuario

Tipro

Tipro FREE+ Manual de usuario

Systemline

Systemline Commander Manual de usuario

Interactive Technologies

Interactive Technologies Insite Manual de usuario

GVision

GVision Legacy Manual de usuario

BeiJer

BeiJer T21C-C24 Manual de usuario

Advantech

Advantech ITM-5117 Series Manual de usuario

Edge

Edge CS Manual de usuario