TECHNICAL INFORMATION
INSTRUMENTS
CONNECTION PROCEDURES
Product(s) : ALM500, ALM700, AKR550, AKR750, APH550, CS550, CSPOLA600
Implementation date : 20 6.02. 6
Criticality : normal
I. Hardware 2
. Hardware provided 2
2. Hardware to be ordered 2
II. Connection procedures 3
. Connect the APH550 system 3
2. Connect the APH550 system with a CSPOLA600 or a CS550 or a CP550 4
3. Connect the APH550 system with a AKR550 or a AKR750 5
4. Connect the APH550 system with a ALM500 or a ALM700 6
III. Settings 7
. Configure the KB550 keyboard 7
2. Configure the monitors and the test projector 0
a. CSPOLA600 and CS550 0
b. CP550 2
3. Configuring an AKR750 or an AKR550 2
4. Configuring an ALM500 or an ALM700 3
IV. Exporting data from an ALM or an AKR 4
. Exporting data from an ALM500 or an ALM700 4
2. Exporting data from an AKR750 or an AKR550 5
V. Importing data on the APH550 6
Please find below the connection procedures between ALM500/ALM700 (Focimeter) and AKR550/AKR750
(autokerato refractometer) with APH550 to import fitting data from the ALM and/or the AKR.
International Customer Service
Essilor Instruments
64bis, avenue Aubert – 94306 Vincennes Cedex – France
Tél. : +33(0) 72 94 7 00 – Fax : +33(0) 72 94 70 27 / 7
