Essence TR-KPD Manual de usuario
Smart Security
TR-KPD
User Guide
ESUGSS070
Version 1.0
September 2020
Table of Contents
2 Smart Security TR-KPD User Guide
Table of Contents
1. Product Description................................................................................................................................3
2. Installing the Keypad ............................................................................................................................. 4
3. Arming and Disarming............................................................................................................................7
3.1. Arming ........................................................................................................................................7
3.2. Disarming....................................................................................................................................7
3.3. Checking Arming Status ............................................................................................................ 8
3.4. Triggering a Panic Alarm............................................................................................................ 8
4. Changing the Batteries ...........................................................................................................................9
5. Specifications........................................................................................................................................ 10
Appendix A Keypad Indications and Actions ..........................................................................................13
Product Description
Smart Security TR-KPD User Guide 3
1. Product Description
The TR-KPD (keypad) is an encrypted, battery operated, wireless, access control and system arming
device.
Key features include:
User identity verification using a proximity RFID tag or passcode
MiFare® DESFire® RFID technology
Five-button design provides system activation controls and status indications
Full numeric keypad
Functions:
Arm
Disarm
Partial arm
Panic alarm
Efficient power consumption to extend battery life
Supports automatic over-the-air software programming and configuration upgrade (RSU)
Installing the Keypad
4 Smart Security TR-KPD User Guide
2. Installing the Keypad
Ensure that you have:
Four AA batteries
A screw and wall anchor
Screwdriver
Drill
To install the keypad:
1. Choose a smooth, flat indoor wall near the door.
2. Release the keypad's mounting base by lifting the tab and sliding the base in the tab’s direction.
Installing the Keypad
Smart Security TR-KPD User Guide 5
3. Press the tamper switch several times.
4. Insert four fresh new AA alkaline batteries, according to the correct polarity.
WARNING! A new battery can explode if it is incorrectly installed.
5. Drill a hole in the wall and insert a wall anchor.
6. Clean and dry the wall.
Tamper switch
Installing the Keypad
6 Smart Security TR-KPD User Guide
7. Peel off the mounting-tape protective strips.
8. Ensure that the wall anchor and tamper pin holes are aligned.
9. Press the wall mount into place.
10. Insert a screw in the tamper pin hole and tighten.
11. Align the keypad onto the mounting base, and slide the keypad into place.
Tamper pin hole
Arming and Disarming
Smart Security TR-KPD User Guide 7
3. Arming and Disarming
You can use the keypad to activate the following arming modes:
Armed Away - Arms all devices
Armed Partial- Arms a specified group of devices
Armed Perimeter - Arms perimeter devices
Disarmed
3.1. Arming
To arm:
1. Press the button for the arming mode you want.
2. If your installation requires authentication for arming, enter your numeric passcode or place your
tag over the .
Partial and perimeter arming modes can be activated at the same time.
3.2. Disarming
To disarm:
If your user does not require a passcode, place the tag over the .
If your user is configured for passcode only, enter the passcode and press √.
If your user requires a tag and a passcode, enter the passcode and then place the tag over the
.
Arm Partial 2
Arm Perimeter
Arm Away
Arm Partial 1
Arming and Disarming
8 Smart Security TR-KPD User Guide
3.3. Checking Arming Status
To check the system's arming status, press .
If lights green, the system is disarmed.
If light red, the system is armed. The button or buttons
that light indicate the arming mode.
3.4. Triggering a Panic Alarm
In case of an emergency, you can trigger a panic alarm. To trigger a panic alarm, press and hold the
keypad's SOS button for at least five seconds.
SOS button
Changing the Batteries
Smart Security TR-KPD User Guide 9
4. Changing the Batteries
To change the keypad's batteries:
1. Release the keypad's mounting base by lifting the tab and sliding the keypad away from the tab.
2. Remove the old batteries.
3. Press the tamper switch several times.
4. Insert four new fresh AA alkaline batteries, according to the correct polarity.
WARNING! A new battery can explode if it is incorrectly installed.
5. Align the keypad onto the mounting base, and slide the keypad into place.
Tamper switch
Specifications
10 Smart Security TR-KPD User Guide
5. Specifications
Item Data
Part Number ES700TRKPD
Communications Bi-directional protocol: ECOP – Essence proprietary communication
protocol
Maximum RF range: Up to 700m (2,296 ft.) – open air
Modulation and frequency:
Europe: 868.3 MHz 2FSK
The Americas: 916.5 MHz 2FSK
RFID 106 kbps, 13.56 Mhz
Data Security
RF: 32-bit ID, over four billion combinations
RFID: 128-bit ID, DES, AES, and ECC
Security and safety Tamper mechanism – wall tamper
Unique electronic serial number
Power supply Keypad
Batteries: Four 1.5V AA alkaline batteries
Battery life: Three years with 10 tag-reads and 10 code entries per day
Tag: No batteries required
Dimensions Size (H x W x D):
Keypad: 103 x 103 x 20 mm (4.1 x 4.1 x 1.2 in.)
Tag: 10 x 34 x 50 mm (0.39 x 1.34 x 1.97 in.)
Weight:
Keypad: 135 g (0.3 lbs.) – battery not included
Tag: 10 g (0.02 lbs.)
Environment Operating ambient temperature range: -10° C - 55° C (14° F – 131° F)
Storage ambient temperature range: -20°C – 60°C (-4°F – 140°F)
Operating humidity: Up to 95% non-condensing
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
