Page 5 CORRECT OPERATION CHECKLIST
CORRECT OPERATION CHECKLIST
1. PROGRAMMING
➢Access to programming: lift the local telephone handset and dial
.
You will hear the dialling tone (one longer tone followed by a shorter tone).
➢Program the telephone line type:
dial for GSM200-C module or for PSTN line or
universal gateways (2G/3G/4G).
➢Program a telephone number for the emergency-call alarm:
dial <telephone number> .
➢Record the identification message of the specific elevator (max. 22
seconds), which is meant to contain all necessary information
concerning the elevator location: dial , pronounce the
message and hang up.
➢To listen again to the previous message, lift the local telephone handset
and dial: .
➢Make an external call to check the telephone line presence: dial and
digit the telephone number to make a test call.
2. ALARM PROCEDURE CHECK
➢Press the emergency button.
The emergency call will be made.
3. ANSWERING AN ALARM
-1st mode: handsfree connection by “Handsfree activation” code (factory
default)
➢Answer by the called party.
The voice messages will be heard.
➢Press to speak with the trapped person.
-2nd mode: automatic handsfree connection
➢Answer by the called party.
➢Speak with the trapped person.
Remark: you can choose the 1st or the 2nd mode with the “Handsfree
connection mode” programming (code 78).
