ESP FHDV4KBWF Manual de usuario
4 CHANNEL WIRE FREE FULL HD CCTV SYSTEM
USER MANUAL
www.espuk.com
FHDV4KBWF
FHDV4RWF
FHDVC4FBWF
FHDV4KBWF Manual.indd 1 21/12/2016 13:26:34
CONTENTS
NVR Description ................................................... 3
Basic Operations ................................................... 5
Record Setup ...................................................... 8
Playback Recording ............................................... 10
Transferring to USB ............................................... 11
Pairing Additional Cameras ........................................ 12
Remote Viewing ................................................. 13
Help Guide ....................................................... 18
This manual is designed to be used as a quick start guide alongside the informative general user
interface (GUI) of the NVR.
2
Quick Notes;
• The Cameras supplied in the kit are preregistered to the NVR.
• Cameras supplied separately will need to be registered to the NVR.
• The NVR will require a connection to a monitor to be programmed.
• Please format the pre-installed Hard Drive during setup.
• Although the system utilizes the latest in Wire Free technology the NVR and
cameras will require a power supply each.
IMPORTANT NOTICE
• Please read this manual and keep for later use
• Do not use accessory devices not recommended by the manufacturer
• Please use the power adapter equipped for the unit
• Please do not touch any control parts not mentioned in the manual.
Incorrect adjustment of a control part not mentioned in the manual may
damage the machine
• Ensure air ventilation around the unit and do not cover or block the vent hole
• Do not place the unit in direct sunlight or near a heat source
FHDV4KBWF Manual.indd 2 21/12/2016 13:26:34
3
REAR PANEL
NVR DESCRIPTION
FRONT PANEL
FHDV4KBWF Manual.indd 3 21/12/2016 13:26:34
4
IP CAMERA DESCRIPTION
Wire Free Technology
The stated Open field range of 150M is across an open field. Any line of
transmission obstruction will reduce the useful range.
When siting units consider minimising the number of walls, trees, doors, hills within
landscaping or other solid objects that exist along the line of transmission.
Avoid a line of transmission that follows the whole length of a wall rather than
directly through it.
A small adjustment to the position of either transmitter or receiver can make a
huge difference to performance.
Avoid siting transmitter or receiver units in close proximity to other wire free
equipment such as routers, baby monitors or sources of electrical energy such as
microwave ovens, very high voltage cable etc..
Although the housing of the IPC is weatherproof, the LAN port and power
connection require weatherproof housing.
For best wire free signal insure system antennas run parallel;
FHDV4KBWF Manual.indd 4 21/12/2016 13:26:34
5
BASIC OPERATIONS
CONNECTION TO A MONITOR
The NVR has a HDMI and VGA output to connect to a monitor. Please select the
appropriate connection and select the correct input channel on the monitor.
POWER ON
Plug the power supply to the DC12V terminal and Switch On from the rear panel.
POWER OFF
Turn off the NVR at the mains power source after selecting the power off option
from the Shortcut Menu/ Exit System.
LIVE VIEWING
On start up the NVR will display a divided screen. Using the Mouse Control, double
click on any image to bring to full screen. Double click again to return to that main
divided screen.
The recording status and alarm status are indicated by the following icons:
Each channel with a paired camera will also display the signal strength;
Recording Motion Detect Time defined recording
Disconnected Low Signal Average Signal High Signal
FHDV4KBWF Manual.indd 5 21/12/2016 13:26:34
6
TO ACCESS THE MENU
Right click the mouse anywhere on screen to activate the Shortcut Menu.
Selecting Main Menu option will automatically display the System Login screen.
The default settings are:
User Name: Admin
Password: ‘leave blank’
Once logged in, right click to access menu selections.
An opportunity to change the password is provided within the settings menu. Please
note if an incorrect password is entered three times the NVR alarm will activate. If a
wrong password is entered five times the system will lock out. To reset the system
turn the main power off and back on after 5 minutes.
FHDV4KBWF Manual.indd 6 21/12/2016 13:26:34
7
SHORTCUT MENU
Right-clicking on the live camera screen will activate the Shortcut Menu where the
most regularly used settings can be found.
Before first use, please Format the Hard Drive (HDD)
Enter the Short Cut menu;
>Select System Setup
>Select General Setup
>Select HDD Setup
>Highlight HDD
>Select the option to Format.
The unit is now ready to record
FHDV4KBWF Manual.indd 7 21/12/2016 13:26:35
8
RECORD SETUP
RECORD CONFIGURATION
Manual Record-
As default the unit will be set to manual record, the cameras are recording
continuously and the HDD will automatically overwrite the oldest data available.
To access the menu enter the Shortcut Menu and select Manual Record.
Motion and Schedule Record-
Access the Shortcut Menu > System Setup > record set up
Channel
Select 1–4
Weekday
Select day off
Schedule1-4
Each camera has the ability to have 4 different record schedules in 1 day.
Time; continuous record for the time period set.
Motion; only records motion triggers picked up by the system.
NB. When entering the ‘Record
Setup’ the default screen will
always start with a display of the
settings for Channel 1 and the
current day’s schedule.
FHDV4KBWF Manual.indd 8 21/12/2016 13:26:35
9
Additional Motion Record Settings
Once a camera has been set to ‘Motion’ in the schedule enter the Video Detection
menu to define parameters;
From the System Setup menu enter Channel Setup > Video Detection.
Select required channel and ensure option is enabled before adjusting the on
screen settings.
FHDV4KBWF Manual.indd 9 21/12/2016 13:26:35
10
RECORDING PLAYBACK
The NVR records all camera footage to the internal Hard Drive.
To access the footage enter the Shortcut Menu >Video Playback.
Manual search allows the user to define the exact point of when to begin playback.
NB. Practice playing back footage to familiarize with the process before an incident occurs.
NB. As default the record resolution is set to 1080p. For best performance in this resolution
it is recommended that only one channel at a time is selected for playback.
FHDV4KBWF Manual.indd 10 21/12/2016 13:26:35
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Sistema de seguridad de ESP
ESP
ESP DVR4i Pro Manual de usuario
ESP
ESP FHDV 4 R Manual de usuario
ESP
ESP MAGPRO16 Instrucciones de montaje
ESP
ESP UDTAKIT Manual de usuario
ESP
ESP HDV4R Manual de usuario
ESP
ESP GuardCam WF-SAR Manual de usuario
ESP
ESP HDview Manual de usuario
ESP
ESP HDview Manual de usuario
ESP
ESP DIGI-VIEW 4 System Manual de usuario
ESP
ESP ESPAN-04 Series Manual de usuario
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario