ERTE B3 Manual de usuario

www.erte.com.tr

B3 INDICATOR

Version P.31

DE-19-NAWID-PTB006 R76/2006-A-DE1-2019.06

ERTE® Endustriyel Elektronik Sanayi e Ticaret Limited Sirketi

Address IZMIR / TURKEY

Telephone +90 232 2 9 7400

Fax +90 232 2 9 3960

E-mail [email protected]

Web site www.erte.com.tr

Contents

1. MATTERS TO CONSIDER........................................................................................................................... 2

2. INTRODUCTION.......................................................................................................................................... 3

Interface....................................................................................................................................................... 3

Keys and Functions................................................................................................................................ 3

Signs and Meanings............................................................................................................................... 4

Connection Diagram....................................................................................................................................

Notes...................................................................................................................................................... 6

Dimensions.................................................................................................................................................. 7

3. WEIGHING PARAMETERS AND ADJUSTMENT.........................................................................................8

Weighing Parameters.................................................................................................................................. 9

Adjustment................................................................................................................................................. 10

4. SER MENU (SER2, SER3)......................................................................................................................... 11

. ALIBI MENU................................................................................................................................................ 12

6. LANGUAGE AND INFORMATION MENUS................................................................................................13

Language Menu......................................................................................................................................... 13

Information Menu....................................................................................................................................... 13

7. ERROR AND WARNING MESSAGES....................................................................................................... 14

1. MATTERS TO CONSIDER

●The device must be operated from an earthed socket.

●It should not be connected to the same power line with powerful electrical

machines and should not be operated near

●Make sure that the electrical connection is cut before the cover of the

device is disassembled.

●Recommended cable thickness for load cell connection is 1 mm². If it is

necessary to use thinner cable, it should be thickened by using double (or

more) ends for ±supply. This is especially important for long cable

connections.

●If the load cell/collection box connection does not have sensing leads (4-

way connection) device will give Error 3. In such cases, connect the

sensing leads to the supply terminals at the closest point to the load cell.

(See wiring diagram.)

●Shielded and twisted-pair cable for load cell and communication

connections should be used.

●For the most accurate weighing results, the device should be left in

operation for at least half an hour before calibration.

2. INTRODUCTION

Interface

* Display digit height is 2 mm

Keys and Functions

KEY EXPLANATION APPLICATION

FUNCTION

NUMERIC INPUT

FUNCTION

SELECT FROM

LIST FUNCTION

Zero Key Zero weight Exit Menu Reset value Select 0 if it is in

the list

Tare Key

(Scroll) Tare in/out Show Previous

Go to the next

digit Show previous

Print Key

(Increase)

Print,

save to alibi

memory

Show Next Menu Increase value Show next

Star Key

(Enter) Enter Menu Enter Menu Approve value Select

Function

Key

(Exit)

Differs by

application Exit Menu Cancel Cancel

Signs and Meanings

R1, R2 Range indicator: If configured as a multi range instrument, indicates the current weighing

range.

Center-of-zero indicator: Indicates the deviation from zero is not more than ±0.2 e.

NET Net indicator: Indicates that a tare device is in operation and the displayed weight value is a

net weight.

Stability (No-motion) indicator: Indicates that stability of equilibrium has been reached.

kg Unit of weight: Indicates the unit of the weight, if a weight value is displayed.

Battery : Indicates the battery level in devices with battery option. When it starts to flash, the

device should be charged as soon as possible.

Connection Diagram

On/Off Switch

Power 8 – 264 VAC, 47 - 63 Hz, 0.2 A

Note: Make sure to connect the device to a grounded socket

Load Cell

Pin Explanation

1 - Signal

2 + Signal

3 - Sense (Note: Connect to - Excitaion if load cell sense not available)

4 + Sense (Note: Connect to + Excitaion if load cell sense not available)

Chassis

6 + Excitation

7 - Excitation

Remote Display

Pin Value ERTE Remote Display Connection

1, 2, 3 Not connected Not connected

4, ,

6, 7,

8, 9

4 4

6 6

7 7

8 8

9 9

RS-232

Pin Value PC Connection

2 Tx 2

3 Rx 3

7Gnd

USB USB PC Connection

Note: USB driver must be downloaded and installed from www.erte.com.tr before the

cable is connected.

Notes

•In this position the calibration is OFF / LOCKED

•In this position the calibration is ON / UNLOCKED.

•3. Optional RS-232 output must be connected from Op1

•Relay option must be connected from Op2

Dimensions

3. WEIGHING PARAMETERS AND ADJUSTMENT

In order to setup weighing properties, follow these steps:

• Switch off the device and disconnect the power cable.

• Dismount the front panel and put the adjustment switch in UNLOCKED position.

• Mount the front panel and switch on the device.

• Perform weighing setup.

• When the weighing setup is done, switch off the device and disconnect the power cable.

• Dismount the front panel and put the adjustment switch in LOCKED position.

• Mount the front panel and switch on the device.

Note: Device is shipped with the switch in UNLOCKED position.

While the device is powered with UNLOCKED adjustment switch, functions of the keys are as following:

Press this key to enter menu. When pressed, first menu item is displayed. Press

key to display next item, press or to exit menu.

pAr Weighing parameters

AdJuSt Calibration

When this key is pressed, the weight value is displayed in increased resolution

(increment/10). In this position, the weight unit sign (kg) goes out. When the

calibration switch is in the off position, it automatically returns to the normal display

after seconds.

Otros manuales para B3

Tabla de contenidos

Otros manuales de Instrumento de medición de ERTE

ERTE

ERTE B3 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario