Ericsson MINI-LINK AMM 1U-1 Manual de usuario
MINI-LINK High Capacity
Indoor Installation Manual
MINI-LINK
AMM 1U-1, AMM 2U-4
Copyright
© Ericsson AB 2002 – All rights reserved. No parts of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or otherwise, without
prior permission of the publisher.
Disclaimer
The contents of this document are subject to revision without notice due to
continued progress in methodology, design, and manufacturing. Ericsson shall
have no liability for any error or damage of any kind resulting from the use
of this document.
EN/LZT 712 0156 R1A 2002-10-01
MINI-LINK High Capacity Indoor Installation Manual
Contents
1 Introduction 1
1.1 How to use this Manual 2
1.2 Target Group 2
1.3 Revision Information 3
1.4 Related Documents 3
1.5 Installation Workflow 4
2 Safety Instructions 5
2.1 Introduction 5
2.2 Safety Standards 5
2.3 Safety Requirements 6
2.4 Safety Symbols and Definitions 7
2.5 Hazards 8
3 System Overview 11
3.1 Introduction 11
3.2 Indoor Units 12
3.3 Management System 14
4 Preparations 15
4.1 Tools and Equipment 15
4.2 Units and Accessories 18
5 Indoor Installation 23
5.1 Fitting the Radio Cable Panel (optional) 24
5.2 Fitting the DDU (optional) 25
5.3 Installing the Fan Unit 26
5.4 Installing the AMM 29
5.5 Fitting the Dummy Front (optional) 32
5.6 Inserting and Removing the Plug-in Units 33
6 Indoor Cabling 37
6.1 Assembling and Connecting the Cables 38
6.2 Marking and Labelling 77
6.3 Connector and Pin Connection Overview 77
EN/LZT 712 0156 R1A 2002-10-01
MINI-LINK High Capacity Indoor Installation Manual
7 Initial Settings 83
7.1 Setting Frequency and Output Power 84
8 Indoor Radio Cabling 87
8.1 Preparing the Radio Cable 88
8.2 Connecting the Radio Cable to the Indoor Unit 89
9 Software Setup 97
10 Functional Test 99
10.1 Preparations 99
10.2 General Tests 100
10.3 Hop Test 102
10.4 Optional Tests 103
10.5 Starting the System 104
11 Local Supervision and Repair Handling 107
11.1 Local Supervision Interface 107
11.2 Repair Handling 108
Glossary 111
Index 113
EN/LZT 712 0156 R1A 2002-10-01
MINI-LINK High Capacity Indoor Installation Manual
1 Introduction
This installation manual contains information on how to install the indoor part
of a MINI-LINK High Capacity system. The outdoor part is described in the
MINI-LINK Point-to-point Outdoor installation Manual.
The MINI-LINK High Capacity system is a digital microwave radio link for voice
and data transmission and represents a new generation of synchronous radio
for short haul point-to-point implementations.
The radio system provides traffic capacity at 155 Mbit/s and supports the
SDH STM-1 electrical and optical standards as well as the SONET OC-3
standard.
The terminal consists of an outdoor radio unit with antenna, and indoor units
which hold traffic, modem, service and switching functions. Two types of
terminal configuration are possible: unprotected terminals (1+0) and protected
terminals (1+1).
5392
15GHz
15GHz
RADIO
ALARM POWER
15GHz
15GHz
RADIO
ALARM POWER
Figure 1 A terminal in a 1+1 configuration
1
EN/LZT 712 0156 R1A 2002-10-01
MINI-LINK High Capacity Indoor Installation Manual
1.1 How to use this Manual
The manual includes the following sections.
1. Introduction gives a brief description of MINI-LINK High
Capacity and information on how to use this
manual.
2. Safety Instructions describes safety regulations and
requirements as well as safety information
used throughout the manual.
3. System Overview describes the function and design of the
indoor part of MINI-LINK High Capacity.
4. Preparation contains information on required tools, units
and accessories for the outdoor installation.
5. Indoor Installation contains job instructions for installation of the
AMM and of indoor accessories.
6. Indoor Cabling contains job instructions for indoor cabling.
7. Initial Settings contains the necessary initial settings for the
terminal.
8. Indoor Radio Cabling contains job instructions for the cabling
procedure between the radio unit and the
AMM.
9. Software Setup contains a description of the software setup
when the installation is completed.
10. Functional Test contains a functional test to verify the
installation.
11. Local Supervision
and Repair Handling
contains a description of the local supervision
interface and instructions on how to handle
faulty equipment.
Glossary contains important terms used in this
manual.
1.2 Target Group
This manual has been written for field technicians and supervisors who work
with the installation of MINI-LINK equipment on site.
The personnel must be authorized and have the appropriate technical training
and experience.
The field technician is expected to be experienced in radio and mobile
communications, and have a good understanding of technical English or any
other language in which this manual is available.
2EN/LZT 712 0156 R1A 2002-10-01
MINI-LINK High Capacity Indoor Installation Manual
1.3 Revision Information
This is the first release of the MINI-LINK High Capacity Indoor Installation
Manual.
1.4 Related Documents
References to the following documents are made throughout the manual using
the document name only.
EN/LZT 712 0015 MINI-LINK Point-to-point Outdoor Installation
Manual
The manual describes how to install the outdoor part of
a MINI-LINK hop.
EN/LZT 712 0058 MINI-LINK High Capacity Operation Manual
The manual describes how to set up, operate and
maintain the terminal.
EN/LZT 110 2049 DC Distribution Unit (DDU), Installation Instruction
The instruction describes how to install a DC Distribution
Unit with associated cabling.
1/22 102-
FGB 101 004/1
MINI-LINK Product Portfolio Description
The description gives technical and functional
description of the main products in the MINI-LINK
product portfolio.
3
EN/LZT 712 0156 R1A 2002-10-01
MINI-LINK High Capacity Indoor Installation Manual
1.5 Installation Workflow
The flowchart below shows the recommended installation workflow. The
outdoor installation is described in the MINI-LINK Point-to-point Outdoor
Installation Manual.
Read the Safety
Instructions
Indoor Installation
Indoor Cabling
Initial Settings
Outdoor Installation
Outdoor Radio Cabling
Antenna Alignment
SW Setup
Functional Test
Start the System
Read the Safety
Instructions
5790
Indoor Radio Cabling
Indoor Installation Outdoor Installation
Figure 2 Installation workflow
4EN/LZT 712 0156 R1A 2002-10-01
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Receptor de Ericsson
Ericsson
Ericsson LBI-38505A Manual de usuario
Ericsson
Ericsson MASTR II Manual de usuario
Ericsson
Ericsson RX8315 Manual de usuario
Ericsson
Ericsson RX8 Series Manual de usuario
Ericsson
Ericsson MASTR II Manual de usuario
Ericsson
Ericsson RX1290 Manual de usuario
Ericsson
Ericsson TT1222 MPEG-2 SD 4:2:0 Manual de usuario
Ericsson
Ericsson MASTR II Manual de usuario
Ericsson
Ericsson RX8310 Manual de usuario
Ericsson
Ericsson RX8200 Manual de usuario
Ericsson
Ericsson LBI-38310A Manual de usuario
Ericsson
Ericsson RX8310 Manual de usuario
Ericsson
Ericsson RX8320 Manual de usuario
Ericsson
Ericsson RX8330 Manual de usuario
Ericsson
Ericsson 19D902783G1 Manual de usuario
Ericsson
Ericsson RX8300 Manual de usuario
Ericsson
Ericsson RX8000 Series Manual de usuario
Ericsson
Ericsson EDACS 19D902120G1 Manual de usuario
