Ergotron LX Desk Mount LCD Arm Manual de usuario
1 of 28
888-45-277-W-03 rev.G • 06/14
LX Sit-Stand Wall Mount System
with Universal CPU Holder
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l’utente - Italiano
Användarhandbok - svenska
ユーザーガイド:日本語
用户指南 : 汉语
ENGLISH
ASSEMBLY INSTRUCTIONS
For the latest User Installation Guide please visit: www.ergotron.com
2 of 28
888-45-277-W-03 rev.G • 06/14
0-5 lbs
(0-2.3 kg)
180°
360°
180°
90°
5°
5°
70°
180°
360°
180°
0° or 360°
3.15"
(80mm)
7.1"
(180mm)
6.5"
(165mm)
1.57"
(40mm)
1.34"
(34mm)
1.14"
(29mm)
5.1"
(129mm)
2" - 8"
(102 - 203 mm) 40 lbs (18 kg)
20"
(508 mm)
20"
(508 mm)
25 lbs
(11.3 kg)
ENGLISH
Maximum Screen
Size* = 42”
*Limited to 25 lbs
maximum
Features & Specifications
3 of 28
888-45-277-W-03 rev.G • 06/14
ABCD
1
2
ABCD
1
2
3
13 mm
2
1
1/4-20 x 1/2"
1/4-20 x 2"
M4.2 x 25mm
1x
1x
1x
1x 2x 4x
4x
2x
2x
2x 1x
1x
1x
9x
2x
1x
1x
2x
12x
7x
7x
14x
14x
2x
2x
7/16"
M4 x 14mm
2x
Ø 3/16" (5mm)
Ø 3/8” (10mm)
M10 x 16mm
6mm
ENGLISH
Components
Tools Needed
Stud Finder
Wood Stud Mounting
Concrete Wall Mounting
4 of 28
888-45-277-W-03 rev.G • 06/14
ABCD
1
2
3
4
5
6
5x 4x
1x
2x
1x
1x
1x
10-24 x 1/2"
4x
8x 4x
1/8”
1x
1x 1x
5mm
4mm
1x
1x
2x
2x
2x
4x
4x
4x
4x
M6
M6 x 45mm
M4 x 8mm
M4 x 10mm
M4x12mm M5x12mm M6x12mm
4x 4x 4x
4x
4x
4x
4x
M8 M5 Kit
M4 x 10mm
M8-M5
Reducer
4x
4x
M5 x 7mm
1x M3 x 6mm
M5x20mm
ENGLISH
Components
5 of 28
888-45-277-W-03 rev.G • 06/14
1
6”
(152 mm)
21”
(533 mm)
21”
(533 mm)
21.5”
(546mm)
37.5”
(953mm) 26.5”
(673mm)
< 25.5”
(648mm)
41”
(1041mm)
5’4” - 5’9”
(163-175cm)
5’4” - 5’9”
(163-175cm)
< 20.5”
(521mm)
20”
(516mm)
4.2”
(106mm)
22”
(562mm) 27.6”
(701mm)
1.3”
(32mm)
0.2”
(5mm)
10.2”
(259mm)
ENGLISH
Mounting Height for Ergonomic Workstation
Determine mounting location:
This mounting height is a recommendation for an ergonomic workstation that accommodates user heights of 5’4”-5’9”
(163-175cm).
If user heights are dierent than this, you should change mounting height to accommodate user heights. (Change mount-
ing height one inch for every one inch dierence in user heights).
Mounting height assumes there is a 6” (152 mm) distance between the center of your monitor mount-
ing holes and the top of the screen. If your distance is smaller, you should increase mounting height
accordingly, if your distance is larger, you should decrease your mounting height accordingly.
Top view showing range of motion when pulled out from the wall.
Front view with arm pushed back against the wall.
6 of 28
888-45-277-W-03 rev.G • 06/14
2
Requires minimum material thickness of 5/8” (16 mm).
Requiere un grosor mínimo de 16 mm.
Epaisseur minimum de 16 mm.
Requer uma espessura mínima de 5/8” (16 mm).
Mit einer Materialdicke von mindestens 16 mm.
Vereist een minimale materiaaldikte van 1.6 cm.
Richiede uno spessore del materiale non inferiore a 16 mm.
厚さが最低 5/8” (16 mm) の資材が必要。
需要最低材料厚度为 5/8”(16 mm).
7
≥ 5/8”
Sheetrock
Sheetrock
Plaque de plâtre
Rigipsplatte
Sheetrock
Cartongesso
Gipsskiva
シートロック
石膏板
8
Wood
Madera
Bois
Solide Holzbalkenträger
Massief Houten Pilaren
Due montanti in legno massiccio
木
木质
나무
Hollow Wall
Pared
Mur
Wand
Muur
Parete
壁
墙壁
Studs ≥ 25 gauge steel
Pernos de acero de calibre ≥ 25
Goujons ≥ calibre25 en acier
Bolzen ≥ Blechlehre Nr. 25
Verbindingsbouten ≥ 25 gauge staal
Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
Reglar ≥ 25-gauge stål
25ゲージのスチールよりも強力なスタッド
板墙筋为不小于 25 标号的钢材
ENGLISH
CAUTION: Make sure the wall mount bracket is level,
ush and snug to the wall surface. DO NOT OVERTIGHT-
EN THE BOLTS.
WARNING: Ensure that the wall structure is capable
of supporting four times the total weight of mounted
equipment. Mounting to wall surfaces that do not meet
this criteria may result in an unstable, unsafe condition
which could lead to personal injury and/or property
damage. Consult a construction professional if you
have any doubt about what this means in regard to
your particular application.
7 of 28
888-45-277-W-03 rev.G • 06/14
2
Studs ≥ 25 gauge steel
Pernos de acero de calibre ≥ 25
Goujons ≥ calibre25 en acier
Bolzen ≥ Blechlehre Nr. 25
Verbindingsbouten ≥ 25 gauge staal
Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
Reglar ≥ 25-gauge stål
25ゲージのスチールよりも強力なスタッド
板墙筋为不小于 25 标号的钢材
Ø 3/16" (5 mm)
x 5
a
ef
cb
d
3
Studs ≥ 25 gauge steel
Pernos de acero de calibre ≥ 25
Goujons ≥ calibre25 en acier
Bolzen ≥ Blechlehre Nr. 25
Verbindingsbouten ≥ 25 gauge staal
Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
Reglar ≥ 25-gauge stål
25ゲージのスチールよりも強力なスタッド
板墙筋为不小于 25 标号的钢材
7x
7x
Wood
Madera
Bois
Solide Holzbalkenträger
Massief Houten Pilaren
Due montanti in legno massiccio
木
木质
나무
9
ENGLISH
Stud Finder
Wood Stud Mounting
8 of 28
888-45-277-W-03 rev.G • 06/14
Hollow Wall
Pared
Mur
Wand
Muur
Parete
壁
墙壁
1
2
3
4
bc
de
Ø 1/2"
(12.7 mm)
a
14x
1/4-20 x 2"
Requires minimum material thickness of 5/8” (16 mm).
Requiere un grosor mínimo de 16 mm.
Epaisseur minimum de 16 mm.
Requer uma espessura mínima de 5/8” (16 mm).
Mit einer Materialdicke von mindestens 16 mm.
Vereist een minimale materiaaldikte van 1.6 cm.
Richiede uno spessore del materiale non inferiore a 16 mm.
厚さが最低 5/8” (16 mm) の資材が必要。
需要最低材料厚度为 5/8”(16 mm).
f
9
3
≥ 5/8”
Sheetrock
Sheetrock
Plaque de plâtre
Rigipsplatte
Sheetrock
Cartongesso
Gipsskiva
シートロック
石膏板
14x
2
ENGLISH
9 of 28
888-45-277-W-03 rev.G • 06/14
ef g
12x 2x
1x
2" - 4"
(51 - 102 mm)
4" - 8"
(102 - 203 mm)
Security Feature
Función de seguridad
Fonction de sécurité
Sicherheitsmerkmal
Beveiligingsfunctie
Dispositivo antifurto
セキュリティ機能
安全特性
2x
7/16"
10
4
3
1x
abcd
1/8"
2x
M10 x 16mm
1x
1x
6mm
2x
M10 x 16mm
6mm
ENGLISH
10 of 28
888-45-277-W-03 rev.G • 06/14
a
4
8x
10-24 x 1/2"
1/4-20 x 1/2"
8x
bc
d
ENGLISH
Optional locking feature
(customer supplied lock)
NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution
over time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a
light duty thread locking adhesive to fasteners before installation to prevent back-out.
NOTE: The mounting bracket can be relocated vertically on the
wall track by loosening the the four wall plate screws.
Otros manuales para LX Desk Mount LCD Arm
9
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Rack y soporte de Ergotron
Ergotron
Ergotron All-in-One Stand Manual de usuario
Ergotron
Ergotron AnthroBench 293 Series Manual de usuario
Ergotron
Ergotron 9" Vertical Lift Manual de usuario
Ergotron
Ergotron 100 Series Manual de usuario
Ergotron
Ergotron LX Desk Mount LCD Arm Manual de usuario
Ergotron
Ergotron StyleView 5 Manual de usuario
Ergotron
Ergotron WorkFit Dual Hinge Bow Accessory Manual de usuario
Ergotron
Ergotron 97-582-009 Manual de usuario
Ergotron
Ergotron Neo-Flex 33-334-085 Dimensiones
Ergotron
Ergotron Neo-Flex LCD Arm Manual de usuario
Ergotron
Ergotron Neo-Flex 45-174-300 Dimensiones
Ergotron
Ergotron MXV Manual de usuario
Ergotron
Ergotron MXV Manual de usuario
Ergotron
Ergotron Neo-Flex Manual de usuario
Ergotron
Ergotron VESA Manual de usuario
Ergotron
Ergotron LX Desk Dual Direct Arm Manual de usuario
Ergotron
Ergotron Neo-Flex Manual de usuario
Ergotron
Ergotron Neo-Flex Manual de usuario
Ergotron
Ergotron 100 Series Manual de usuario
Ergotron
Ergotron LX Desk Mount LCD Arm Manual de usuario
