Eqss Gen-3 LMS Manual de usuario

EQUIPMENT SAFETY SYSTEMS PTY LTD

eqss™ Gen-3 LMS

Telehandler Load Management System

Installation Manual for JCB 5 0-180

PLEASE NOTE:

VER: 1810171225

***Failure To Follow Installation Manual Will Void Warranty***

***Do Not Swap Components between Gen3-LMS kits***

When installing multiple Gen3-LMS kits, make sure the serial

number on the sticker matches the serial number on the

machine.

Documentation Conventions

The list below highlights important do umentation onventions.

Text presented in this manner is intended to provide the user

with some general information. The user should ensure

information presented in this manner is clearly understood.

Text presented in this manner provides the user with

information to assist in completion of the current procedure

being explained.

Text presented in this manner indicates that a failure to follow

directions could result in damage to equipment, loss of

information, bodily harm, or loss of life.

VER: 1810171225 2 of 49

Important Information

Information ontained in this publi ation regarding this devi e's appli ations and the like is

provided only for your onvenien e and may be superseded by updates. It is your

responsibility to ensure that the appli ation or our equipment meets with your

spe ifi ations.

EQUIPMENT SAFETY SYSTEMS MAKE NO REPRESENTATIONS OR WARRANTIES

OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY

OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED

TO, IT'S CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS

FOR PURPOSE.

Equipment Safety Systems dis laims all liability arising from this information and its use.

Use of Equipment Safety Systems’ produ ts as riti al omponents in life support systems

is not authorised ex ept with express written approval by Equipment Safety Systems. No

li enses are onveyed, impli itly or otherwise, under any Equipment Safety Systems

intelle tual property rights.

VER: 1810171225 3 of 49

Table of Contents
Tools Required for Installation.....................................................................................5
Installation Index...........................................................................................................6
 overs.........................................................................................................................10
 able Reeler Installation.............................................................................................11
 able Reeler Mounting Position.............................................................................13
Pressure Sensor Installation.......................................................................................14
Main  ylinder Head Pressure Sensor – Option 1..................................................14
Main  ylinder Head Pressure Sensor – Option 2..................................................15
Main  ylinder Rod Pressure Sensor......................................................................16
 ompensation Pressure Sensors............................................................................18
Reverse  amera..........................................................................................................20
Forward  amera..........................................................................................................21
Signal Light Installation..............................................................................................22
 an Pressure Input Module ( PIM)............................................................................25
 an  abin Interface Module ( IM)...........................................................................27
External  able  ompletion.........................................................................................28
Dashboard Switches....................................................................................................29
Display Installation......................................................................................................30
Machine  onnections..................................................................................................32
Finalisation..................................................................................................................36
Set Time & Sensor  alibration...................................................................................40
Appendix A: Attaching Display  onnectors...............................................................43
Appendix B: Reattach Ferrites...................................................................................47
Indexes and Tables.....................................................................................................48
 VER: 1810171225   4 of 49 

Tools Required for Installation

The tools required to perform the installation of the TSS are listed below

•Pen il or Texta

•Drill

•Drill bits

◦3.3 mm

◦4.5 mm

◦5 mm

◦6.25 mm

◦6.8 mm

◦8.5 mm

•Centre pun h

•Tap T-Handle

•Taps

◦M6

◦M7 x 0.75

◦M8

•Drill and tap oil

•Metri Allen keys

•Phillips Head s rew driver

•Spanners and so kets

◦7 mm

◦10 mm

◦13 mm

•Lo ktite thread lo ker

•Side utters

•Stanely knife

•Crimpers

•Wire strippers

•Hole saw

◦31 mm

◦34 mm

VER: 1810171225 5 of 49

Installation Index

The omponents and ables of the Gen-3 Telehandler Load Management System are

outline in the tables below. The following pages show where the omponents are installed

and the able routing.

See the appropriate manual se tion for a detailed installation des ription for ea h

omponent.

Refer to this section for any component placement or cable

routing issues

Item omponent Description

1 able Reeler

2 Main Lift ylinder Head Pressure Sensor

3 Main Lift ylinder Rod Pressure Sensor

4 ompensation Pressure Sensors

5 an Pressure Input Module ( PIM)

6 Forward amera

7 Reverse amera

8 Light Tower

9 an abin Interface Module ( IM)

10 Display Module

Table 1: Component Installation Index

VER: 1810171225 6 of 49

olour able Description

Red Boom able

Dark Green Main ylinder Pressure Sensor ables

Brown ompensation Head Pressure Sensor able

Dark Blue ompensation Rod Pressure Sensor able

Light Blue Forward amera able

Violet Signal Light able

Aqua Rear amera able

Dark Purple IM able

Light Green utout Harness

Light Purple Height Limiter able

Orange Display able

Table 2: Cable Installation Index

VER: 1810171225 7 of 49

Illustration 1: Machine Boom

Note: Loadall 540-140 is shown.

VER: 1810171225 8 of 49

Illustration 2: Machine Chassis

Note: Loadall 540-140 is shown.

VER: 1810171225 9 of 49

Covers

Remove the following overs before starting the installation

Step Description Diagram

1. Release the dashboard display bolts

2. Remove the indicator display behind

the steering wheel

Table 3: Cover removal

VER: 1810171225 10 of 49

Otros manuales para Gen-3 LMS

Tabla de contenidos

Otros manuales de Monitor de eqss

eqss

eqss Gen-3 LMS Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación