Epson BrightLink 475Wi Manual de usuario

BrightLink Interaction

The BrightLink interactive pens turn any wall or table into

an interactive area, either with or without a computer.

•With a computer, you can use Easy

Interactive Tools (dual pens). This

software lets you use the pen as a mouse

to annotate, save, and interact with

content from your computer.

•Without a computer, you can use the

toolbar that is built into the projector

(single pen). This lets you annotate

images from a document camera,

tablet, DVD player, or other source

connected to your projector.

Students and colleagues can connect

their own laptops and annotate on the

ﬂy using the built-in toolbar, without

installing software.

Start Here

Follow the steps on this card to get started with your

BrightLink:

1Connect your computer and turn on the projector

2Make sure the software is installed

3Calibrate

 • Usingtheremotecontrol

4Use the pens

• Choosingtherighttool

5Use the built-in toolbar

5In the Extended menu, select the Easy Interactive

Function setting and press .

6Select Use Source and press .

7Select the source where your computer is

connected. For example, if your computer is

connected with a VGA cable to the projector’s

Computer1 port, select Computer1. If your

computer is connected with an HDMI cable,

select HDMI.

If you don’t know which source to select, check

with your school’s tech coordinator.

8Display an image from your computer. If the image

doesn’t appear, try one of the following:

•On some Windows laptops, you may need to

hold down the Fn key on the keyboard and

press F7 or the function key that lets you display

on an external monitor. It may have an icon such

as , or it may be labelled CRT/LCD.

•On a Mac, you may need to open System

Preferences and select Displays. Select the

VGA Display or Color LCD option if necessary,

then click the Arrange or Arrangement tab,

and select the Mirror Displays check box.

•Try pressing the Source Search button on the

remote control.

1 Connect Your Computer and Turn on the Projector

1 Connect the USB cable directly to any available

USB port on your computer.

USB cable

2Connect the projector to your computer with an

HDMI or VGA cable.

HDMI

VGA

3Turn on the projector by pressing the red power

button on the remote control.

In Windows®, you may see messages about device

drivers or new hardware.

Depending on how your computer is connected to

the projector, you may need to select your source

for computer interaction.

4The default language of the menu system is English.

To select a different language, press the Menu

button on the remote control. Select Extended

and press . Select Language and press .

Select your language and press . Press the

Esc button to exit the menu.

If you need to install the software

Do one of the following:

sUse the CD that came with the projector, labeled

“EPSON Projector Software for Easy Interactive

Function”.

sDownload the most up-to-date version from:

global.latin.epson.com/Soporte (website available

only in Spanish and Portuguese).

For more information about Easy Interactive Tools, see

the Easy Interactive Tools Tips sheet in this Welcome Kit

or the BrightLink User’s Guide.

2 Make Sure the Software Is Installed

You may already have the projector software on your

computer, or you may need to install it yourself. For

Mac OS X, you need Easy Interactive Driver and Easy

Interactive Tools. For Windows, you only need Easy

Interactive Tools.

Here’s how to ﬁnd out if the software is installed on

your computer:

If you are using Windows:

Select or Start > All Programs or Programs >

EPSON Projector > Easy Interactive Tools Ver.2.00.

If you see Easy Interactive Tools Ver.2.00, the software

is installed.

If you are using a Mac:

Look for the Easy Interactive Driver and Easy

Interactive Tools folders in the Applications folder on

your hard drive. If you see these folders, the software

is installed.

If the software is not installed, follow the steps in the next

column to install it.

3 Calibrate

Calibration coordinates the position of the pen with the

location of your cursor. If the pen position and cursor

location don’t match, you can try auto calibration, or you

can calibrate manually for even greater accuracy. You

don’t need a computer, and you won’t need to calibrate

again unless the projector or image is moved, or the

image is resized.

1To start auto calibration, press the User button on

the remote control.

2When you see the Auto Calibration screen, do one

of the following:

 •Press to try auto calibration, then wait until

calibration is complete.

 •SelectNo, then press and follow the steps

below to calibrate manually.

3When you see this screen, select Manual

Calibration.

4When you see this screen, press to select Yes.

5Follow the instructions on the screen to touch

the circles and perform manual calibration.

For more detailed instructions, see the BrightLink

User’s Guide to calibrate manually.

Using the Remote

Control

Select from various

image sources

connected to the

projector

Enter

Zoom in and out

Stop video action

Turn projector

on/off

Access menu

system for

additional

adjustments

Calibrate

Page through

documents

Temporarily

turn off image

For more information on using the remote control and

cool time-saving buttons, see the User’s Guide on your

computer or on the BrightLink CD.

Choosing the Right Tool

If you already have annotation software, you can use

it with BrightLink. If you are using Microsoft®Ofﬁce

2003 or later, you can also use the “inking tools” to add

handwritten notes to your documents and PowerPoint®

presentations.

Here are some tips on choosing among the tools that

came with your BrightLink projector:

Built-In Toolbar

Easy Interactive Tools

Annotate on computer display • •

Annotate on white

background

• •

Annotate on images from

document cameras or other

sources

•

Use both pens simultaneously •

Save annotations •

Annotate without a computer •

Your projector came with 2 pens that have different

colored ends, orange and blue. Make sure one AA

battery is installed in each pen.

Battery light

Power switch

•To turn on the pen, slide the power switch. The green

light comes on brieﬂy. If the battery is low, the light

ﬂashes.

•Hold the pen perpendicular to the board, as shown

below.

•To left-click, tap on the board.

•To double-click, tap twice.

•To right-click, press the board with the pen for

about 3 seconds.

•To click and drag, tap and drag with the pen.

•To move the cursor, hover over the board without

touching it.

•When you are ﬁnished, slide the power switch to

turn off the pen.

Note: The pens turn off automatically after about 20

minutes of inactivity. Slide the switch to turn the pen

back on.

4 Use the Pens

EPSON is a registered trademark and EPSON Exceed Your Vision is a registered

logomark of Seiko Epson Corporation.

BrightLink is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identiﬁcation purposes

only and may be trademarks of their respective owners. Epson disclaims any

and all rights in those marks.

This information is subject to change without notice.

Printed in USA

Two different toolbars are available, one for annotation

mode and one for whiteboard mode.

•Annotation mode displays the built-in toolbar on

whatever image is being projected.

•Whiteboard mode lets you project a white or black

screen or background pattern, and use the pen to write

or draw as you would on a chalkboard or dry erase

board.

Select whiteboard

mode

Redo

Zoom into image

Use custom pen

Use hightlighter

Use black, red, or blue

pen—select large dot

for thick line

Erase—select large dot

for thick eraser

Clear all annotations

Close toolbar

Select annotation

mode

Undo

Select background

color or pattern*

Recalibrate

Change custom pen

color and width

Change highlighter

color

Use black, red, or

blue pen—select

small dot for thin line

Erase—select small

dot for thin eraser

Hide toolbar after

each annotation

* In annotation mode, the freeze tool appears instead of this one. It

lets you stop or resume action in a video.

5 Use the Built-In Toolbar

The projector’s built-in toolbar lets you annotate images

from other devices that have been connected to the

projector, such as a document camera, tablet, or other

source. You can write with only one pen at a time, but

you can use both pens and trade off.

1Press one of the Source buttons on the remote

control to select the source for the image you want

to annotate. (Make sure you do not select the same

source that is selected for Easy Interactive Function

in the Extended menu.)

Image from an

external device

connected to the

USB port

Image from a

computer connected

to the Computer2

port

Image from a computer with

an HDMI connection, or a

video player

Image from a computer or

iPad connected through a

wired or wireless network

2To activate the toolbar, tap the board with the pen.

You see arrow icons on the left and right side of

the projected image.

Note: The toolbar arrows disappear if they are not

used. To make them reappear, tap the board with

the pen.

3To display the toolbar, select one of the arrows.

4To close the toolbar, select the icon at the

bottom of the toolbar.

Note: Many of the built-in tools are the same as Easy

Interactive Tools, but fewer functions are available.

All of the tools are available, even if they have a gray

background.

Otros manuales para BrightLink 475Wi

Tabla de contenidos

Otros manuales de Proyector de Epson

Epson

Epson PowerLite Home Cinema 2000 Manual de usuario

Epson

Epson EB-G6800 Manual de usuario

Epson

Epson EMP 7800 Manual de usuario

Epson

Epson EMP-83 Manual de usuario

Epson

Epson EB-X14 Manual de usuario

Epson

Epson PowerLite Home Cinema 6100 Manual de usuario

Epson

Epson EH-TW8100 Manual de usuario

Epson

Epson PowerLite 7000XB Manual de usuario

Epson

Epson EB-W10 Manual de usuario

Epson

Epson EMP 400W Manual de usuario

Epson

Epson PowerLite S9 Manual de usuario

Epson

Epson PowerLite L520W Manual de usuario

Epson

Epson PowerLite TW-100 Manual de usuario

Epson

Epson BrightLink 450Wi - Interactive Projector Manual de usuario

Epson

Epson 7900p - PowerLite XGA LCD Projector Hoja de especificaciones

Epson

Epson BrightLink 1485Fi Manual del propietario

Epson

Epson 1705C - PowerLite XGA LCD Projector Manual de usuario

Epson

Epson PowerLite 7350 Manual de usuario

Epson

Epson PowerLite Pro G5350NL Manual de usuario

Epson

Epson PowerLite 8150i Manual de usuario

Epson

Epson PowerLite Pro Cinema 9700 UB Guía de instalación

Epson

Epson PowerLite Home Cinema 5030UBe Guía de referencia

Epson

Epson 830p - PowerLite XGA LCD Projector Manual de usuario

Epson

Epson PowerLite Pro Cinema 7100 Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manual de usuario

JVC

JVC 1108TTH-AO-AO Manual de usuario