Epson TM-T88VI-iHUB Manual de usuario

User’s Manual

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Part Names and Functions . . . . . . . . . . . . . . . . . . . 3

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing/Replacing the Roll Paper . . . . . . . . . . 12

Cleaning the Product . . . . . . . . . . . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Product Specifications . . . . . . . . . . . . . . . . . . . . . . 17

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

M00104402 EN

English

Before Use

Please read this manual carefully before using this product. Keep this manual at hand for

immediate reference whenever necessary. For details about the functions and operation procedure

of this product and software, refer to Technical Reference Guide.

Key to Symbols

The symbols shown below are used in this manual in order to ensure safety and proper use of this

product and to prevent danger to customers and other persons, and property damage. The symbols

indicate the precaution levels as described below. Be sure that you completely understand their

meaning before reading this manual.

!WARNING:

Handling the product improperly by ignoring this symbol can lead to death or serious injury.

!CAUTION:

Handling the product improperly by ignoring this symbol can lead to injury and property damage.

QNote:

Provides important information and useful tips.

Safety Precautions

!WARNING:

Be sure to use the specified AC adapter. Connection to an improper power source may cause

fire.

Caution Labels

The caution labels on the product indicate the following precautions.

!KCAUTION:

Do not touch the thermal head during printing or immediately after printing. After printing, the

thermal head can be very hot.

!CAUTION:

Touching the manual cutter may cause injury.

English

Part Names and Functions

1 NFC Tag

A mark is printed here to indicate the position of the NFC tag. To establish communication with an

NFC device, bring the device close to this mark. For details on functions that use the NFC tag, see the

Technical Reference Guide.

2 Roll paper cover

Open this cover to install/replace the roll paper.

3 Manual cutter

Use this cutter when you cut the roll paper manually.

4 Cutter cover

Open this cover to unlock the autocutter blade when the roll paper cover does not open due to a

paper jam.

5 Power switch

Use this switch to turn on or off the printer.

6 Connector cover

Use the printer with this cover attached to protect cables.

7 Cover open button

Use this button to open the roll paper cover.

8 Dip switch cover

Open the cover to view the dip switches for communication settings. Do not change the DIP switch

settings.

Control panel

English

Control Panel

1 (Power) LED

This LED is on when the printer is on.

2 (Error) LED

This indicates an error.

3 (Paper) LED

On indicates a paper near end or out. Flashing indicates standby.

4 Feed button

Press this button once to feed the roll paper for one line. Hold down this button to continue feeding

the roll paper.

English

Interface

All the ports and connectors are located on the back of the printer.

1 Drawer kick connector

Connects the modular cable for the cash drawer.

2 Ethernet port

Connects the 10 BASE-T/100 BASE-TX LAN cable.

3 Serial port

Use only for connecting external devices.

4 USB Type A port

Use only for connecting external devices.

!CAUTION:

It may be hard to disconnect some types of USB cable. Do not forcibly pull the cable, or the USB port

and USB cable may be damaged. Contact your dealer if you encounter the trouble.

5 USB port with charging function

Connects a USB cable for connecting to an external USB device, or for charging a connected smart

device or USB device. By using the setting utilities, you can configure whether to use the port for

connecting a device or charging a device.

!CAUTION:

It may be hard to disconnect some types of USB cable. Do not forcibly pull the cable, or the USB port

and USB cable may be damaged. Contact your dealer if you encounter the trouble.

6 Power supply connector

Connects the DC cable for the AC adapter.

7 USB Type B port

Connects the USB cable for connecting to computers.

23 4567

English

Setup

Installing the Printer

Install the printer horizontally on a flat surface.

Connecting the AC Adapter

!WARNING:

Be sure to use the specified AC adapter [AC adapter,V (Model: M344A)]. Connection to an

improper power source may lead to equipment damage, fire, or electric shock.

1. Make sure the printer is turned off.

2. Connect the DC cable of the AC adapter to the power supply connector (stamped 24V).

3. Connect the AC cable to the AC adapter.

4. Connect the AC cable plug to a power outlet.

DC-in (24V)

English

Connecting External Devices

If you connect external devices, connect each cable to the port/connector on the back of the

printer. (U“Interface” on page 5)

!CAUTION:

❏

When connecting external devices to the USB ports, follow the precautions below.

• Confirm the rated current of the external devices by checking the descriptions on the devices or manuals.

Connect the external devices only when those total rated current is less than 2.0 A. Do not use a device

whose rated current is unclear.

• Use UL-approved external devices (only for North American users).

❏

When charging smart devices or USB devices from the USB port with charging function, make

sure you use the genuine cable for the device you are using.

❏

When Ethernet cables are installed outdoors, make sure devices without proper surge protection

are cushioned by being connected through devices that do have surge protection. Otherwise, the

devices can be damaged by lightning.

❏

It may be hard to disconnect some types of USB cable. Do not forcibly pull the cable, or the USB

port and USB cable may be damaged. Contact your dealer if you encounter the trouble.

Attaching the Connector Cover

Follow the steps below to attach the connector cover to protect the cables.

1. Turn over the printer.

2. Position the two hooks on both sides of the connector cover so that they hook the printer case.

Hook

English

3. Push the connector cover down to click onto the printer case.

QNote:

❏

You can use the enclosed screw to fix the connector cover.

❏

To remove the connector cover, turn the printer over, remove the screw, and push the connector

cover down while pushing both sides of the connector cover inward to detach the hooks from the

printer case.

English

Arranging the Cables

Pass the cables through cable exits in the connector cover.

Some cables can be routed out from the front by passing them through the notch in the printer

bottom.

QNote:

❏

When using cables without lock, use of the bundled cable lock band is recommended.

❏

You can also attach bottom cover to hide connectors.

Bundled cable

lock band

English

After the cable arrangement, turn over the printer, and make sure the cables are not pinched.

Attaching the Power Switch Cover

By attaching the power switch cover, you can prevent accidental operations of the power switch.

You can turn on and off the power switch by inserting a sharp-pointed object in the holes on the

power switch cover. To detach the cover, use a sharp-pointed object.

To use this cover, install it as shown in the illustration below.

!WARNING:

If an accident occurs with the power switch cover attached, unplug the power cord

immediately. Continued use may cause fire or shock.

Otros manuales para TM-T88VI-iHUB

Tabla de contenidos

Otros manuales de Impresora de Epson

Epson

Epson GP-C831 Manual del operador

Epson

Epson Stylus C87 Manual de usuario

Epson

Epson WF-8590 Manual de usuario

Epson

Epson LQ-570e Manual de usuario

Epson

Epson Stylus Color 760 Manual de usuario

Epson

Epson ProofPlus TM-H6000III Manual de usuario

Epson

Epson Stylus Photo 925 Guía del usuario

Epson

Epson SureColor S40600 Manual de usuario

Epson

Epson TM-P20II Manual de uso y cuidado

Epson

Epson L3250 Manual de usuario

Epson

Epson Workforce Pro WF-C8690DWF Manual de usuario

Epson

Epson EPL-N4000 Manual de usuario

Epson

Epson SC-P900 Series Manual de usuario

Epson

Epson 785EPX - Stylus Photo Color Inkjet Printer Manual de usuario

Epson

Epson Stylus Pro 7900 Manual de usuario

Epson

Epson Stylus Color 400 Hoja de especificaciones

Epson

Epson LQ-680 Manual de usuario

Epson

Epson Stylus Color 760 Manual de instalación y operación

Epson

Epson SC-B9000 Series Manual de usuario

Epson

Epson Stylus Pro 4900 Manual de usuario

Epson

Epson TM-U220-i Manual de uso y cuidado

Epson

Epson L1800 Manual de usuario

Epson

Epson STYLUS PRO WT7900 Manual de usuario

Epson

Epson XP-352 Manual de instrucciones

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario

Ricoh

Ricoh Aficio AP400 Manual de usuario

BIXOLON

BIXOLON SRP-352plusV Manual de usuario