Epson SureColor S40600 Manual de usuario

Contents

Unpacking and assembling the printer .............................................................................................. 2

Assembling the stand .................................................................................................................. 5

Installing the printer ................................................................................................................... 8

Installing the auto take-up reel unit ..........................................................................................14

Installing the media feeding unit ..............................................................................................18

Connecting the cables .............................................................................................................. 21

Installing the print drying system (included with SC-S60600) ................................................. 25

Installing ink cartridges ................................................................................................................... 26

Installing the software ..................................................................................................................... 28

Setting an administrative password ........................................................................................... 29

2|Unpacking and assembling the printer

Unpacking and assembling the printer

Note: Unless otherwise indicated, the illustrations in this manual show the SureColor®S40600, but the

instructions apply to all models.

Before you begin, make sure you have enough space to set up and use the printer. When choosing a place

for the printer, select a location that provides easy access to the printer and is within the printer’s operating

conditions (59 to 95 °F [15 to 35 °C]; 20 to 80% humidity without condensation). The following

illustration shows the minimum space required to use the printer:

Caution: Avoid locations subject to direct sunlight, excessive heat, moisture, smoke, dust, sand, or vibrations

from other equipment. Do not tilt the printer more than 10° while moving it.

WARNING: Eight people are required to unpack and install the printer. Be sure the printer is placed on a flat,

stable location that is well ventilated and can support the following weight and power requirements for each

printer:

•SC-S40600 — 615 lb (279 kg); access to one or more outlets for 2 power cables with a total amperage

of 20 A at 100 V or 10 A at 240 V

•SC-S60600 — 641 lb (291 kg); access to one or more outlets for 3 power cables with a total amperage

of 21 A at 100 V or 10.5 A at 240 V

•SC-S80600 — 626 lb (284 kg); access to one or more outlets for 2 power cables with a total amperage

of 20 A at 100 V or 10 A at 240 V

145.5 in.

(362 cm)

39.4 in.

(100 cm)

69.7 in.

(177 cm)

107.9 in.

(274 cm)

19.7 in.

(50 cm)

19.7 in.

(50 cm)

3.9 in.

(10 cm)

39.4 in.

(100 cm)

Unpacking and assembling the printer |3

The following items are included:

Printer and stand

4|Unpacking and assembling the printer

Auto take-up reel and media feeding unit

Print drying system (included with SC-S60600)

Maintenance supplies

Note: The maintenance supplies are not required for setup. For more information on their use, see the Quick

Reference or online User’s Guide.

After unpacking the printer and stand, save the box and packaging in case you need to ship the printer

later.

Assembling the stand |5

Assembling the stand

You need the following parts to assemble the stand:

Note: It is recommended to have 3 or more people assemble the stand.

1. Slide the larger horizontal strut into both of the legs.

2. Use the long end of the hex wrench to tighten the pre-placed screws on each side of the horizontal

strut.

6|Assembling the stand

3. Slide in both of the smaller horizontal struts.

4. Use the hex wrench to tighten the screw on each of the four corners.

5. Attach the waste ink tank bracket to the right side of the stand and secure it using a Bscrew.

Assembling the stand |7

6. Slide up the adjustable securing plate (shaded part in step 1 below) and secure the waste ink tank

bracket to it using two B screws. Attach the other waste ink tank bracket and secure it using a B screw.

7. Insert the three cable support clips into the holes shown.

8|Installing the printer

Installing the printer

You need the following parts to install the printer on the stand:

1. Lock the casters on the stand to prevent it from moving.

2. Lift up the latch securing the carry bars and remove the carry bars from the back of the printer.

Installing the printer |9

3. From the front of the printer, insert the carry bars into both sides with the locking bolts toward the

side as shown. Once they are inserted, rotate the bars counterclockwise 90° to lock them into place.

This prevents the printer from sliding when lifted.

WARNING: Use at least eight people to carry the printer as shown.

Note: To avoid stepping on the crate underneath the printer, try to place the printer adjacent to the stand

before lifting the printer.

10 |Installing the printer

4. Lift the printer onto the stand. Make sure to line up the bottom of the printer with the top of the

stand as shown.

5. Remove the carry bars.

6. Secure the printer to the stand using eight Ascrews and washers.

Otros manuales para SureColor S40600

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Epson

Epson

Epson FX-2190N Manual de usuario

Epson

Epson Stylus Photo R2000 Series Guía del usuario

Epson

Epson TM-U200 Series Manual de usuario

Epson

Epson ET-2720 Guía del usuario

Epson

Epson Perfection 1200PHOTO Manual de usuario

Epson

Epson PhotoPC 700 Manual de usuario

Epson

Epson R300 - Stylus Photo Color Inkjet Printer Manual de usuario

Epson

Epson Stylus Pro 5000 Manual de usuario

Epson

Epson ActionLaser Plus Manual de usuario

Epson

Epson Stylus Color C60 Manual de usuario

Epson

Epson WorkForce 60 Manual de instrucciones

Epson

Epson R280 - Stylus Photo Color Inkjet Printer Manual de usuario

Epson

Epson STYLUS CX3700 SERIES Manual de instrucciones

Epson

Epson Stylus Photo EX Manual de usuario

Epson

Epson 785EPX - Stylus Photo Color Inkjet Printer Manual de usuario

Epson

Epson EMP 800 Manual de usuario

Epson

Epson TM-U220 Series Manual de usuario

Epson

Epson TM-L90 series Manual de usuario

Epson

Epson ProofPlus TM-H6000III Manual de usuario

Epson

Epson Stylus C62 Manual de usuario

Epson

Epson l300 Manual de instrucciones

Epson

Epson S020130 Instrucciones de funcionamiento y mantenimiento

Epson

Epson Stylus C86 Manual de instrucciones

Epson

Epson Stylus Photo 950 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario

Ricoh

Ricoh Aficio AP400 Manual de usuario

BIXOLON

BIXOLON SRP-352plusV Manual de usuario