Epson StylusRIP Professional (Stylus Photo 2200 Dimensiones

Page 1 of 2

EPSON PRODUCT SUPPORT BULLETIN

Date: 04/23/2003 Originator: JAM

PSB #: PSB.2003.05.007 Authorization:

Reference: N/A Total Pages: 2

Product(s): Epson Stylus Photo 2200 printer and 802.11b Wireless Print Server

Subject: Stylus Photo 2200 printer not available in OS X Print Center

This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b

Wireless Print Server.

Reasons:

If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer

cannot be found in the Apple Print Center.

Recommendations:

Verify the current version of the firmware on the Print Server. If the version is 3.96 or lower,

update the firmware to 3.99 using the instructions listed below.

How to verify the firmware version:

Print a status sheet from the print server. On the third line of the status sheet the firmware

version will be listed as follows:

FW Ver. WLES-3.96 (2002.06.05)

File location:

The firmware update file, epson10651.sea.hqx, and this bulletin are posted on the

Epson website; http://www.epson.com.

Page 2 of 2

Updating the firmware:

1.) Configure the Mac and the print server for TCP/IP.

2.) Download/copy the “WLEP399.bin” firmware file from the epson10651.sea.hqx to

the Apple Desktop.

3.) Navigate to Macintosh HD>Applications>Utilities>Terminal

4.) At the terminal screen do the following:

1. Type cd desktop then press the RETURN key

2. Type tftp <ipaddress* of the print server> then press the RETURN key

3. At the tftp> prompt, type binary then press the RETURN key

4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key

*Where ipaddress is the IP address of the Wireless print server. Examples

135.79.2.468 or 10.0.1.3

**Where WLEP399.bin is the filename of the 3.99 firmware update.

5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes

were sent. This means the update is complete.

5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the

print server. At WP-Admin in the search screen, click on CLEAR,then click on START for

the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.

Search for the printer:

Once the update is complete, open the Print Center.

Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus

Photo 2200 printer.

Page 1 of 2

EPSON PRODUCT SUPPORT BULLETIN

Date: 04/23/2003 Originator: JAM

PSB #: PSB.2003.05.007 Authorization:

Reference: N/A Total Pages: 2

Product(s): Epson Stylus Photo 2200 printer and 802.11b Wireless Print Server

Subject: Stylus Photo 2200 printer not available in OS X Print Center

This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b

Wireless Print Server.

Reasons:

If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer

cannot be found in the Apple Print Center.

Recommendations:

Verify the current version of the firmware on the Print Server. If the version is 3.96 or lower,

update the firmware to 3.99 using the instructions listed below.

How to verify the firmware version:

Print a status sheet from the print server. On the third line of the status sheet the firmware

version will be listed as follows:

FW Ver. WLES-3.96 (2002.06.05)

File location:

The firmware update file, epson10651.sea.hqx, and this bulletin are posted on the

Epson website; http://www.epson.com.

Page 2 of 2

Updating the firmware:

1.) Configure the Mac and the print server for TCP/IP.

2.) Download/copy the “WLEP399.bin” firmware file from the epson10651.sea.hqx to

the Apple Desktop.

3.) Navigate to Macintosh HD>Applications>Utilities>Terminal

4.) At the terminal screen do the following:

1. Type cd desktop then press the RETURN key

2. Type tftp <ipaddress* of the print server> then press the RETURN key

3. At the tftp> prompt, type binary then press the RETURN key

4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key

*Where ipaddress is the IP address of the Wireless print server. Examples

135.79.2.468 or 10.0.1.3

**Where WLEP399.bin is the filename of the 3.99 firmware update.

5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes

were sent. This means the update is complete.

5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the

print server. At WP-Admin in the search screen, click on CLEAR,then click on START for

the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.

Search for the printer:

Once the update is complete, open the Print Center.

Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus

Photo 2200 printer.

Page 1 of 6

EPSON PRODUCT SUPPORT BULLETIN

Date: 4/30/2003 Originator: DS

PSB #: PSB.2003.05.005 Authorization:

Reference: N/A Total Pages: 6

Product(s): EpsonNet 802.11b Wireless Print Server

Subject: OS X Procedure for Updating the Firmware

This bulletin was created to inform you of the procedural steps used to update the EpsonNet

802.11b Wireless Print Server firmware using the OS X Terminal Utility.

Procedure:

1.) Configure the Macintosh and the EpsonNet 802.11b Wireless Print Server for TCP/IP.

2.) Download/copy the “WLEP399.bin” firmware file to the Desktop.

3.) Navigate to Macintosh HD>Applications>Utilities>Terminal, and launch the Terminal

Utility program.

4.) At the Terminal program screen do the following:

Type cd desktop, press RETURN

Page 2 of 6

TYPE: tftp <enter the IP address of the print server> then press RETURN

Example: tftp 139.63.2.150, then press the RETURN key.

Page 3 of 6

At the tftp> prompt type the word binary, then press RETURN

Example: tftp> binary, then press the RETURN key.

Page 4 of 6

At the tftp> prompt type put <WLEP399.bin file name> then press RETURN

Example: tftp> put WLEP399.bin, then press the RETURN key.

Page 5 of 6

During the update process, you will see a message on the screen at the TFTP prompt that a

number of bytes were sent. This means the update is complete.

Note: If a timeout error occurs do the following:

Check your TCP/IP settings

Cycle the power of the print server

Run WP-Admin, click CLEAR then click START

Check the TCP/IP settings in the Configuration page of the print server, save the settings then

Quit.

Rerun step 4.

5. Next, go to the print server and perform a reset, then launch WP-Admin again to setup the

print server.

6. At WP-Admin in the search screen, click on CLEAR first, then click on START for the print

server to reappear.

Page 6 of 6

7. Open the configuration page and confirm the settings are correct, change if necessary.

8. Print the Configuration page. Click on the WP-Admin drop down menu at the top of the page

and select TEST PAGE or PRINT.

9. Save, then Quit WP-Admin.

Otros manuales para StylusRIP Professional (Stylus Photo 2200

Otros manuales de Impresora de Epson

Epson

Epson SC-F9400H Series Manual de usuario

Epson

Epson Stylus Photo 820 Guía de instalación

Epson

Epson AcuLaser C2600DTN Guía de referencia rápida

Epson

Epson WF-110 Manual de usuario

Epson

Epson SC-F500 Series Manual de usuario

Epson

Epson ET-2710 Series Manual de usuario

Epson

Epson TM-H6000IV Manual del producto

Epson

Epson ActionLaser 1000 Manual de usuario

Epson

Epson WF-6090 Manual de usuario

Epson

Epson C31C213A8941 Manual de usuario

Epson

Epson LQ-2080 Manual de usuario

Epson

Epson SC-F2000 Series Manual de usuario

Epson

Epson Mobilink TM-P60 Manual de usuario

Epson

Epson EPI-4000 Dimensiones

Epson

Epson Office BX310FN Series Manual de instrucciones

Epson

Epson Stylus Color 800 Manual de usuario

Epson

Epson Stylus Photo 900 Guía de configuración

Epson

Epson RX620 - Stylus Photo Color Inkjet Manual de instalación y operación

Epson

Epson Small-in-One XP-300 Manual de usuario

Epson

Epson TM-H6000III Series Manual de usuario

Epson

Epson TM-H6000V Manual de uso y cuidado

Epson

Epson WorkForce WP-4020 Manual de usuario

Epson

Epson Stylus Pro 9000 - Print Engine Manual de usuario

Epson

Epson Stylus C66 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario

Ricoh

Ricoh Aficio AP400 Manual de usuario

BIXOLON

BIXOLON SRP-352plusV Manual de usuario