Epson E0C6001 Manual de usuario

MF943-02

CMOS 4-BIT SINGLE CHIP MICROCOMPUTER

E0C6001 T

ECHNICAL

ANUAL

E0C6001 Technical Hardware

E0C6001 Technical Software

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written

permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice.

Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material

or due to its application or use in any product or circuit and, further, there is no representation that this material

is applicable to products requiring high level reliability, such as medical products. Moreover, no license to any

intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that

anything made in accordance with this material will be free from any patent or copyright infringement of a third

party. This material or portions thereof may contain technology or the subject relating to strategic products under

the control of the Foreign Exchange and Foreign Trade Control Law of Japan and may require an export license

from the Ministry of International Trade and Industry or other approval from another government agency. Please

note that "E0C" is the new name for the old product "SMC". If "SMC" appears in other manuals understand that

it now reads "E0C".

PREFACE

This manual is individualy described about the hardware and the software

of the E0C6001.

I. E0C6001 Technical Hardware

This part explains the function of the E0C6001, the circuit configura-

tions, and details the controlling method.

II. E0C6001 Technical Software

This part explains the programming method of the E0C6001.

Hardware

Software

Hardware

E0C6001

Technical Hardware

Hardware

CONTENTS

CHAPTER 1 INTRODUCTION............................................................... I-1

1.1 Configuration ................................................................... I-1

1.2 Features .......................................................................... I-2

1.3 Block Diagram ................................................................. I-3

1.4 Pin Layout Diagram......................................................... I-4

1.5 Pin Description ................................................................ I-5

CHAPTER 2 POWER SUPPLY AND INITIAL RESET ................................ I-6

2.1 Power Supply .................................................................. I-6

2.2 Initial Reset...................................................................... I-8

Oscillation detection circuit...................................... I-9

Reset pin (RESET) .................................................... I-9

Simultaneous high input to input ports (K00–K03) ... I-9

Internal register following initialization.................... I-10

2.3 Test Pin (TEST).............................................................. I-10

CHAPTER 3 CPU, ROM, RAM ............................................................ I-11

3.1 CPU................................................................................ I-11

3.2 ROM ............................................................................... I-12

3.3 RAM ............................................................................... I-12

CHAPTER 4 PERIPHERAL CIRCUITS AND OPERATION ...................... I-13

4.1 Memory Map .................................................................. I-13

4.2 Oscillation Circuit............................................................ I-18

Crystal oscillation circuit......................................... I-18

CR oscillation circuit ............................................... I-19

4.3 Input Port (K00–K03)...................................................... I-20

Configuration of input port...................................... I-20

Interrupt function ................................................... I-20

Mask option ............................................................ I-22

Control of input port ............................................... I-23

4.4 Output Port (R00, R01) .................................................. I-25

Configuration of output port.................................... I-25

Mask option ............................................................ I-26

Control of output port ............................................. I-28

4.5 I/O Port (P00–P03)......................................................... I-31

Configuration of I/O port ........................................ I-31

I/O control register and I/O mode........................... I-32

Mask option ............................................................ I-32

Control of I/O port .................................................. I-33

4.6 LCD Driver (COM0–COM3, SEG0–SEG19) .................. I-35

Configuration of LCD driver..................................... I-35

Cadence adjustment of oscillation frequency ........... I-41

Mask option (segment allocation)............................. I-42

Control of LCD driver .............................................. I-44

4.7 Clock Timer .................................................................... I-45

Configuration of clock timer .................................... I-45

Interrupt function ................................................... I-46

Control of clock timer.............................................. I-47

4.8 Heavy Load Protection Function .................................... I-49

Operation of heavy load protection function ............ I-49

Control of heavy load protection function ................ I-50

Hardware

4.9 Interrupt and HALT......................................................... I-51

Interrupt factors...................................................... I-53

Specific masks and factor flags for interrupt............ I-54

Interrupt vectors ..................................................... I-54

Control of interrupt ................................................. I-55

CHAPTER 5 BASIC EXTERNAL WIRING DIAGRAM.............................I-56

CHAPTER 6 ELECTRICAL CHARACTERISTICS .................................... I-58

6.1 Absolute Maximum Rating ............................................. I-58

6.2 Recommended Operating Conditions ............................ I-59

6.3 DC Characteristics ......................................................... I-60

6.4 Analog Circuit Characteristics

and Power Current Consumption ................................... I-62

6.5 Oscillation Characteristics .............................................. I-66

CHAPTER 7 PACKAGE ...................................................................... I-68

7.1 Plastic Package.............................................................. I-68

7.2 Ceramic Package for Test Samples............................... I-69

CHAPTER 8 PAD LAYOUT .................................................................. I-70

8.1 Diagram of Pad Layout................................................... I-70

8.2 Pad Coordinates............................................................. I-71

CHAPTER 1: INTRODUCTION

I-1

INTRODUCTION

Each member of the E0C6001 Series of single chip micro-

computers feature a 4-bit E0C6200B core CPU, 1,024 words

of ROM (12 bits per word), 80 words of RAM (4 bits per

word), an LCD driver, 4 bits for input ports (K00–K03), 2

bits for output ports (R00, R01), one 4-bit I/O port (P00–

P03) and one timer (clock timer).

Because of their low voltage operation and low power con-

sumption, the E0C6001 Series are ideal for a wide range of

applications.

Configuration

The E0C6001 Series are configured as follows, depending on

the supply voltage.

CHAPTER 1

1.1

Table 1.1.1

Configuration of the

E0C6001 Series

Model Supply Voltage Oscillation Circuits

3.0 V

1.5 V

E0C6001

E0C60L01

Crystal or CR

Supply Voltage Range

1.8–3.6 V

1.2–2.0 V

E0C6001 TECHNICAL HARDWARE

I-2

Features

Crystal or CR oscillation circuit, 32.768 kHz (typ.)

100 instructions

1,024 words ×12 bits

80 words ×4 bits

4 bits (Supplementary pull-down resistors may be used )

2 bits (Piezo buzzer and programmable frequency output

can be driven directry by mask option)

4 bits

20 segments ×4, 3 or 2 common duty

1 system: clock timer

Input port interrupt 1 system

Timer interrupt 1 system

1.5 V (1.2–2.0 V) E0C60L01

3.0 V (1.8–3.6 V) E0C6001

1.0 µA

(Crystal oscillation CLK = 32.768 kHz, when halted)

2.5 µA

(Crystal oscillation CLK = 32.768 kHz, when executing)

QFP12-48pin (plastic) or chip

1.2

Built-in oscillation circuit

Instruction set

ROM capacity

RAM capacity (data RAM)

Input port

Output port

Input/output port

LCD driver

Timer

Interrupts:External interrupt

Internal interrupt

Supply voltage

Current consumption (typ.)

Supply form

CHAPTER 1: INTRODUCTION

I-3

1.3

Fig. 1.3.1

Block diagram

Power

Controller

LCD

Driver

RAM

80 ×4Interrupt

Generator

I Port

Test Port

I/O Port

O Port

Timer

Core CPU E0C6200B

ROM

1,024 ×12 OSC System

Reset

Control

RESET

OSC1

COM0

COM3

SEG0

SEG19

VDD

VL1

VL3

VS1

VSS

K00~K03

TEST

P00~P03

R00, R01

OSC2

FOUT

BUZZER

(FOUT/BUZZER)

(BUZZER)

Block Diagram

Tabla de contenidos

Otros manuales de Hardware de computadora de Epson

Epson

Epson UB-B03 Manual de usuario

Epson

Epson XJack EFM288XJ Manual de usuario

Epson

Epson IMU G Series Manual de usuario

Epson

Epson S5U1C60N08D Manual de usuario

Epson

Epson S5U1C88000P Manual de usuario

Epson

Epson S5U1C88000H5 Manual de usuario

Epson

Epson E0C6006 Manual de usuario

Epson

Epson S5U1C17801T1100 Manual de usuario

Epson

Epson G-Series Manual de usuario

Epson

Epson ARM720T Core cpu Manual de usuario

Epson

Epson 0C88832 Manual de usuario

Epson

Epson E0C6011 Manual de usuario

Epson

Epson S1C63558 Manual de usuario

Epson

Epson S1C33 Series Manual de usuario

Epson

Epson S1C33 Series Manual de usuario

Epson

Epson PP-100 III Manual de usuario

Epson

Epson Discproducer PP-50BD Manual de usuario

Epson

Epson OT-WL02 Manual de uso y cuidado

Epson

Epson S5U13719P00C100 Manual de usuario

Epson

Epson PP-100II Manual de uso y cuidado

Epson

Epson S5U1C63007P Manual de usuario

Epson

Epson S1C63666 Manual de usuario

Epson

Epson UB-E04 Manual de usuario

Epson

Epson S5U1C60N08E Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario