EPH RS1 Instrucciones de funcionamiento
Installation and Operation Guide
RS1
2
Factory Default Settings
3
Specications & Wiring
4
How your programmable thermostat works
6
Mounting & Installation
8
LCD Display
10
Buttons
11
Setting the date, time and programming mode
12
Temperature Display
13
Programming Modes
14
Factory program settings
15
To program in 5/2 Day mode (Weekdays / Weekend)
17
To program in 7 Day mode (Monday to Sunday)
16
To program in 24 Hour mode (Monday to Sunday)
19
Temporary Temperature Override
20
Permanent Temperature Override
Locking the thermostat 24
18
Copy Function
22
Boost Function
Table of contents
Recessed Programmable Room Thermostat
23
Holiday Function
25
Backlight Function
21
OFF Function
26
Engineering Settings
27
PO1 Operating mode - Normal / Optimum Start / TPi
31
PO2 Setting High & Low Limits
32
PO3 Hysteresis HOn and HOFF
33
PO4 Calibrate the thermostat
34
PO5 Frost Protection
Frost Protection 35
PO6 Factory Reset
2 3
RS1 EPH Controls Ltd.
Factory default settings
Contacts: Volt Free
Temperature indicator: ˚C
Switching dierential: 0.4˚C
In built frost protection: 5˚C
High and Low temp. limitation: O
Blue backlight activated: for 10 secs after press any button
Keypad lock: O
Daylight saving: On
Specications & wiring
Power supply: 230Vac 50HZ
Power consumption: 1 Watt
Temp. control range: 5 … 35˚C
Ambient temperature: 0 … 50˚C
Contact rating: 3A 230Vac
Dimensions: 95 x 95 x 43mm
Temperature sensor: NTC 100K Ohm @ 25
Switching dierential: Adjustable from 0.2/0.4/0.6/0.8/1.0˚C
Frost protection: Only operational in O mode and
Holiday mode
* If mains voltage output is required, terminals
L & COM must be electrically linked.
4 5
RS1 EPH Controls Ltd.
When the thermostat is in the AUTO mode, it will operate according
to the times and temperatures that have been programmed. The user
can select from 6 dierent programs per day - each with a time and a
temperature.
There is no OFF time, only a higher and a lower temperature.
If the user wants the thermostat to be OFF at a certain time, set the
temperature for this time to be low. The thermostat will turn ON if the
room temperature is lower than the setpoint for the current period.
Example: If P1 is set to be 21˚C at 6am, and if P2 is set to be 10˚C at
8am, the thermostat will look for the temperature to be 21˚C between
6am and 8am.
If the user does not want the heating to switch on during a period,
set the temperature for the period to a lower temperature than the
expected ambient temperature.
Example: If the thermostat is programmed with the following time and
temperatures, at 6am the thermostat will look for 21˚C until 8am. From
8am until 5pm the thermostat will be switched o unless the room
temperature falls below 10˚C.
At 5pm the thermostat will start looking for 21˚C until 9pm.
How your programmable thermostat works
P1 @ 6:00 21˚C
P2 @ 8:00 10˚C
P3 @ 12:00 10˚C
P4 @ 14:00 10˚C
P5 @ 17:00 21˚C
P6 @ 21:00 10˚C
6 7
RS1 EPH Controls Ltd.
1) Remove the thermostat from its packaging.
The thermostat is designed to be ush mounted on a wall once
there is a backbox with a min. depth of 35mm tted to the wall.
2) Choose a mounting location so that the thermostat can measure
the room temperature as accurately as possible.
- Mount the thermostat 1.5 metres above the oor level.
- Prevent direct exposure to sunlight or other heating / cooling
sources.
3) Insert a athead screwdriver in either the top or bottom two slots
to remove the front of the thermostat from the base.
4) The dimension of the backplate is 95 x 95mm.
5) Terminate the cables into the terminal block on the backplate and
screw this backplate onto the recessed back box.
6) Line the front of the thermostat up to the backplate and carefully
snap it into position.
Mounting & Installation
8 9
RS1 EPH Controls Ltd.
Hi Lo LIM
[1] [1]
[2]
[3]
[8]
[10] [11] [12]
[4] [5]
[6]
[9]
[7]
[1] Shows the current day of the week
[2] This thermostat has 6 dierent programs.
[3] The required target temperature is displayed.
[4] The current room temperature is displayed.
[5] When a high and low temperature is set, HI LIM or
LO LIM is displayed.
[6] If the keypad is locked, the lock symbol is displayed.
[7] When the thermostat is calling for heat, the ame
symbol is displayed.
[8] Date – The current day and month are displayed.
[9] Current time is displayed in 24 hour mode.
[10] AUTO mode / OFF mode / MAN mode - The selected
Automatic, O or Manual mode is displayed.
[11] BOOST is displayed if the boost function is selected.
[12] Holiday to and from.
LCD Display
10 11
RS1 EPH Controls Ltd.
Buttons
Menu Down
Clock Up
Boost Ok
Press to enter the screen
to program the date, time and
programming mode.
Press or to set the year.
Press or to set the month.
Press or to set the day.
Press or to set the hour.
Press or to set the minute.
Press or to choose from
5 - 2 day, 7 day or 24 hour mode.
Press .
Press .
Press .
Press .
Press .
Press .
Setting the date, time and programming mode
Press or to set the daylight saving time.
Press to return to the home screen.
12 13
RS1 EPH Controls Ltd.
The room temperature is displayed
as shown along with the time and
date.
When the target room temperature
is selected by using or ,
the word ‘SET’ appears in front of
‘ROOM TEMP’ and ‘OVER’ appears
on the screen as a reference to
overriding the current setting.
Temperature Display
The RS1 thermostat has the following programming modes available:
5/2 Day mode Programing Monday to Friday as one block and
Saturday and Sunday as a 2nd block.
Each block can have 6 dierent times and
temperatures.
7 Day mode Programming all 7 days individually with
dierent times and temperatures.
24 Hour mode Programming all 7 days as one block with the
same time and temperatures.
Programming Modes
* See “Setting the date, time and programming mode”on page 11 to select:
5/2 Day mode, 7 Day mode or 24 Hour mode.
14 15
RS1 EPH Controls Ltd.
5/2 Day
P1 P2 P3 P4 P5 P6
Mon-Fri
06:30 08:00 12:00 14:00 17:30 22:00
21˚C 18˚C 21˚C 18˚C 21˚C 16˚C
Sat-Sun
08:00 10:00 12:00 14:00 17:30 23:00
21˚C 18˚C 21˚C 18˚C 21˚C 16˚C
7 Day
P1 P2 P3 P4 P5 P6
Mon-Fri
06:30 08:00 12:00 14:00 17:30 22:00
21˚C 18˚C 21˚C 18˚C 21˚C 16˚C
Sat-Sun
08:00 10:00 12:00 14:00 17:30 23:00
21˚C 18˚C 21˚C 18˚C 21˚C 16˚C
24 Hour
P1 P2 P3 P4 P5 P6
Everyday
06:30 08:00 12:00 14:00 17:30 22:00
21˚C 18˚C 21˚C 18˚C 21˚C 16˚C
Factory program setting 5/2 Day
There are 6 dierent time
and temperature settings
that can be programmed for
the weekdays and 6 dierent
settings for the weekend.
Press twice.
Program [1] for Monday to Friday is now selected.
Press or to select the required time. Press .
Press or to select the required temperature. Press .
Repeat these steps until program [6] has been entered. Press .
Program [1] for Saturday and Sunday is now selected.
Repeat the programming steps until complete.
Press to conrm the settings and to return to the home screen.
To program in 5/2 Day mode (Weekdays / Weekend)
* To deactivate settings you should adjust the temperature lower.
16 17
RS1 EPH Controls Ltd.
There are 6 dierent time and
temperature settings that can
be programmed, these are the
same for every day of the week.
Press twice.
Program [1] for Monday to Sunday is now selected.
Press or to select the required time. Press .
Press or to select the required temperature. Press .
Repeat these steps until program [6] has been entered.
Press to conrm the settings and to return to the home screen.
To program in 24 H mode (Monday to Sunday)
There are 6 dierent time and
temperature settings that can
be programmed for each day
independently.
Press twice.
Program [1] for Monday is selected.
Press or to select the required time. Press .
Press or to select the required temperature. Press .
Repeat these steps until program [6] has been entered. Press .
Program [1] for Tuesday is now selected.
Repeat the programming steps for each day of the week until complete.
Press to conrm the settings and to return to the home screen.
To program in 7 Day mode (Monday to Sunday)
* - Press to skip through days when programming.
- Copy function is available in 7 day mode - see page 16.
- To deactivate settings you should adjust the temperature lower.
* To deactivate settings you should adjust the temperature lower.
Tabla de contenidos
Otros manuales de Termostato de EPH
EPH
EPH CRTP Manual de usuario
EPH
EPH OpenTherm RFRP-HW-OT Manual de usuario
EPH
EPH CURVE CDT Manual de usuario
EPH
EPH T47-RFi Manual de usuario
EPH
EPH TRFi Manual de usuario
EPH
EPH CDT2 Manual de usuario
EPH
EPH COMBIPACK3 Manual de usuario
EPH
EPH OpenTherm Manual de usuario
EPH
EPH CP4-HW-OT Instrucciones de funcionamiento
EPH
EPH HDT Instrucciones de funcionamiento
Manuales populares de Termostato de otras marcas
EWELLY
EWELLY EW-181 Manual de usuario
Prolon
Prolon T1100 Instrucciones de instalación
Computherm
Computherm Q20 Manual de usuario
Heatmiser
Heatmiser neoStat Manual de usuario
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario
