EPH Controls RDT Instrucciones de funcionamiento

Installation and Operation Guide

Recessed Room Thermostat

RDT

Factory Default Settings

Specications

LCD Display

Buttons

Wiring

Mounting & Installation

Locking the Keypad / Backlight

Menu Function

On / O Function & Adjusting the Target Temperature

Table of contents

Installation Instructions

Operating Instructions

Delay Start Control (On/O)

P0 1 Operating Mode

Nor (Normal Mode)

Time Proportional Integral Mode (TPI)

P0 2 Setting High and Low Limits

P0 3 Hysteresis HOn and HOFF

P0 4 Calibrate

P0 5 Setback Mode

FP Frost Protection

Resetting the Thermostat

Mains operated non-programmable

Room Thermostat with Setback

Installation Instructions

2RDT

Factory Default Settings

High and Low Temp. limitation: O

Keypad lock: O

Operating mode: Normal

Temperature indicator: ˚C

Frost protection: On (5˚C)

Setback temperature: 0˚C

HYS On: 0.4˚C

HYS OFF: 0.0˚C

EPH Controls Ltd.

Specications

Contacts: Volt Free

Power supply / Input: 230VAC

Power consumption: <1W

Temperature range: 5…35˚C

Ambient temperature: 0…45˚C

Ambient admissible humidity: 5-95%RH

Contact rating: 10(3)A 230VAC

Dimensions: 95 x 95 x 40mm

Internal temperature sensor: NTC 100K

Backlight: White

IP rating: IP20

Pollution degree: 2

Hysteresis (Switching dierential): Adjustable from 0 to 1°C

0.1°C increments

Automatic action: 1C

Setback temperature: Adjustable 0 to 10˚C

4RDT

[1]

[10] [9] [8]

[11]

[3] [4] [5][2]

[6]

[7]

[12]

[1] Displays when setting target temperature.

[2] Displays current room temperature.

[3] Displays current / target temperature.

[4] Displays when changing mode setting.

[5] Displays when setting TPI mode.

[6] Displays when keypad is locked.

[7] Displays when the thermostat is calling for heat.

[8] Displays when thermostat is in the OFF mode.

[9] Displays when setting HIGH and LOW temperature limit.

[10] Displays during calibration mode.

LCD Display

[11] Displays when setting

hysteresis.

[12] Displays when

setback mode is

enabled.

EPH Controls Ltd.

Buttons

OK Button

Down Button Up Button

Standby Button

6RDT

Wiring

Terminal Connections

LLive In

NNeutral In

Terminal 1 OFF - N/C Normally closed connection

Terminal 2 ON - N/O Normally open connection

Terminal 3 COM - Common connection

Terminal 4 SB - Setback connection

230V on Terminal 4: Thermostat works in Normal mode

0V on Terminal 4: Thermostat works in Setback mode

* If mains output is required terminals L and 3 must be electrically linked.

EPH Controls Ltd.

Mounting & Installation

Caution!

Installation and connection should only be carried out by a qualied person.

Only qualied electricians or authorised service sta are permitted to open the

thermostat.

If the thermostat is used in a way not specied by the manufacturer, its safety may

be impaired.

Prior to setting the thermostat, it is necessary to complete all required settings

described in this section.

Before commencing installation, the thermostat must be rst disconnected from

the mains.

This thermostat can be mounted to a recessed conduit box.

8RDT

1) Remove the thermostat from its packaging.

2) Choose a mounting location so that the thermostat can

measure the room temperature as accurately as possible.

- Mount the thermostat 1.5 metres above the oor level.

- Prevent direct exposure to sunlight or other heating /

cooling sources.

3) Use the fastening clip on the base of the thermostat to release

the front housing from the rear wiring box as per diagram on

page 9.

4) Wire the thermostat according to the wiring diagram on page 6.

5) Screw the rear wiring box to the recessed back box.

6) Attach the front housing to the rear wiring box until it clips

securely into place.

Mounting & Installation Continued

Tabla de contenidos

Otros manuales de Termostato de EPH Controls

EPH Controls

EPH Controls R37 Manual de usuario

EPH Controls

EPH Controls COMBIPACK4 Instrucciones de funcionamiento

EPH Controls

EPH Controls CRTP2 Manual de usuario

EPH Controls

EPH Controls CDC2 Instrucciones de funcionamiento

EPH Controls

EPH Controls RFCA-RF Manual de usuario

EPH Controls

EPH Controls CDT2-24 Manual de usuario

EPH Controls

EPH Controls EDBS Instrucciones de funcionamiento

EPH Controls

EPH Controls RFRP-HW-OT Manual de usuario

EPH Controls

EPH Controls CDTP2 Manual de usuario

EPH Controls

EPH Controls CDT2-24 Manual de usuario

EPH Controls

EPH Controls RFC Manual de usuario

EPH Controls

EPH Controls RFRP Manual de usuario

EPH Controls

EPH Controls curve crtp Manual de usuario

EPH Controls

EPH Controls T27-RFi Manual de usuario

EPH Controls

EPH Controls RFRA Manual de usuario

EPH Controls

EPH Controls CRTP2 Instrucciones de funcionamiento

EPH Controls

EPH Controls RFRP-OT Manual de usuario

EPH Controls

EPH Controls HRT Instrucciones de funcionamiento

EPH Controls

EPH Controls T37-RFi Manual de usuario

EPH Controls

EPH Controls CP4M Instrucciones de funcionamiento

EPH Controls

EPH Controls TRFPi2 Manual de usuario

EPH Controls

EPH Controls CDTP2 Manual de usuario

EPH Controls

EPH Controls CRT2 Manual de usuario

EPH Controls

EPH Controls CP4B Instrucciones de funcionamiento

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario