Envision LCD Manual de usuario

English Deutsch Français Italiano Español Nederlands

TABLE OF CONTENTS

TABLE OF CONTENTS 1

CARING FOR YOUR LCD MONITOR 2

WALLMOUNTING 2

UNPACKING 3

CONNECTING 3

STARTUP 4

BASIC SETUP 4

IMAGE SETTINGS USING THE OSD MENU 5

OSD MENU FUNCTIONS 6

TROUBLESHOOTING 9

TECHNICAL SPECIFICATIONS 10

PRECAUTIONS

 The monitor may be damaged if placed too near a source of heat.

Be aware of the location of radiators, cookers, open fires etc.

 Do not cover the slots and openings on the back or top of the cabinet

as the monitor requires ventilation. The monitor should be located in

a well-ventilated room to prevent the possibility of overheating.

 Do not allow sharp objects such as knives, pens, or pencils near the

screen. If such objects touch the screen, the LCD panel will be

permanently scratched.

 When cleaning this monitor, disconnect it from the electric socket to

avoid any danger of electrocution. A soft, lint-free cloth should be

used to clean the outside of the monitor. A cloth very slightly

moistened with a mild detergent solution will clean stubborn stains.

Keep liquids away from the display screen, including sprays. Do not

spray liquid directly - it is best to lightly spray on to a cloth and wipe.

If liquid gets inside the monitor it can cause electrical shock and/or

damage to the unit.

 If you encounter a problem, please check the "Troubleshooting"

section first. If this does not resolve the problem do not attempt to

repair the monitor by yourself; opening or removing covers can lead

to injury or death through electrocution among other hazards.

Please contact a qualified engineer if you find the troubleshooting

section does not help.

CARING FOR YOUR LCD MONITOR

 First, unplug the power cord from the wall socket

 If the LCD screen is extremely dirty, clean it with a moist cloth. Use only warm

water and then wipe the monitor dry. Solvents or harsh cleaners can damage the

housing. Clean the display surface only with a soft cloth, otherwise you may

damage the display’s coating

 If the monitor is only slightly dirty, clean it using a soft, dry and antistatic

cloth.

 The LCD monitor’s screen surface is very sensitive. Please avoid any

contact with the surface (finger, pencil, etc.) and be especially

cautious during transportation since jolts and shocks can cause the

screen to become scratched (always use the original packaging).

WALL MOUNTING

The monitor is shipped with the standard desktop configuration. However, you can

optionally mount the device on a wall or on a monitor swivel arm (optional accessory).

Please follow the corresponding instructions (4-hole assembly with a spacing of 4 × 4

inches (100 × 100 mm) according to the international VESA FDMI standard).

English Deutsch Français Italiano Español Nederlands

UNPACKING

Carefully lift the monitor out of the packaging and make sure that all components are

included (see fig. 1). Save the original box and packing material in case you have to ship

or transport the monitor. To set up the device, you must fit the monitor base together.

Monitor 1 pc 1 pc 1 pc

Figure 1 Signal Cable Power Cable User’s Manual

Figure 1.LCD Monitor

CONNECTING

To connect the monitor to your PC

1. Make sure that the PC and the monitor is unplugged.

2. Connect the 15-pin signal cable to the monitor and The PC

To connect the monitor to the power source

Connect the separate power cable to the Monitor and a grounded outlet.

STARTUP

1. First start your PC and then turn on your monitor using the power switch (⑤in fig. 4).

The status indicator (⑥in fig. 4) should light up blue.

2. Adjust the image to meet your requirements (see the following sections “Basic

Setup” and “Image settings using the OSD menu”).

3. If there is no image displayed on the monitor, consult the section

“Troubleshooting”.

BASIC SETUP

Automatic Image Adjustment

You can adjust the image settings (such as brightness, contrast, image position,

phase, etc.) manually or by using the LCD monitor’s automatic image adjustment

feature. This will adjust the image parameters to their optimal settings for the

current graphics mode. Press EXIT/AUTO (④in fig. 4) to launch the automatic

adjustment. The process will take a short while until completed.

Shortcut for adjusting brightness and contrast

You can adjust contrast and brightness directly by pressing the SEL/MENU button (①in

fig. 4) while the OSD menu is not displayed. then you need to press SEL/MENU to select

either brightness or contrast then press menu to activate it, Press the S/INPUT button (②

in fig. 4) to increase the contrast/brightness or the Tbutton (③in fig. 4) to decrease it.

English Deutsch Français Italiano Español Nederlands

IMAGE SETTINGS USING THE OSD MENU

The OSD menu is a window on your screen that allows you to view and change display

settings. To change an OSD setting:

Figure 4.Monitor features

Press the SEL/MENU button (①in fig. 4) to display the OSD menu on the screen.

1. There are a total of 6 OSD submenus divided by categories. Select the desired

submenu by pressing the OSD button SEL/MENU button (①in fig. 4); see section

“OSD Menu Functions”).

2. Press the OSD button SEL/MENU (①in fig. 4) to activate the selected function or

associated submenu.

3. If you selected submenu, now select the sub-function you want using the Sor

TOSD buttons(②and ③in fig. 4).

4. Set the desired value using the OSD button Sor T.

5. Press the EXIT/AUTO (④in fig. 4) button to save the setting. Repeat setups 2-5 to

make further adjustments as needed.

6. The OSD menu automatically disappears if no changes are made for more

than 45 seconds (default setting). The current settings will be saved. You can

close it manually by pressing the EXIT/AUTO (④in fig. 4) button

OSD MENU FUNCTIONS

Brightness/Contrast

Image Control

 Controls the picture’s

contrast, brightness, black level

and auto level.

 Auto Adjustment: Automatically

selects the optimal settings for image

parameters (image position, phase, etc.)

by using the button SEL/MENU (①in fig.

4).

 H. Position: Controls the

picture’s horizontal position.

 V. Position: Controls the

picture’s vertical position.

 Clock: Sets up the internal clock.

Larger values make the displayed image

appear wider; smaller values make i

appear compressed.

 Phase: Adjusts the internal

clock’s time lag in order to optimize the

screen image.

English Deutsch Français Italiano Español Nederlands

Color

OSDSetup

 Regulates the color

temperature settings. Activate the

OSD window using the SEL/MENU

button. Go to the COLOR option by

pressing the Sor Tbuttons. Press

the SEL/MENU button and Sor T

to select R, G or B. Then you can

change the color values using the

Sor Tbuttons

 Language: English, French ,

Spanish

 H. OSD Position: Controls the

OSD menu’s horizontal position.

 V. OSD Position: Controls the

OSD menu’s vertical position.

 OSD Timeout: Determines

how long (in seconds) the OSD menu

waits before closing automatically afte

no action has been performed

Advanced

Information

 Input Select: Controls the

selection of the input signal. The

monitor allows you to make the

following connections: analog graphics

card via the 15-pin mini D-Sub

interface.

 Resolution Notifier:

There is an optional OSD window

(On/Off) that displays the newly

adjusted screen resolution

settings including both horizontal

and vertical frequencies.

 Factory recall:

SELECT: Start EXIT: Back

 The optimum resolution

for this monitor is 1440 × 900 @

60KHz

English Deutsch Français Italiano Español Nederlands

TROUBLESHOOTING

Blank Screen

Power indicator is off

 Make sure the power cable and the power adapter are connected properly

(see section “Connecting”).

 Make sure that the monitor was turned on using the power switch (see

section “Startup”).

Power indicator lights orange

 A screen saver may have activated automatically after a certain period of

inactivity. Press any key on your keyboard or move the mouse.

“Check signal cable”message

 Is the signal cable connected to the monitor and the PC’s graphics port

(see section “Connecting”)?

 Is the PC turned on (see your PC’s documentation)?

Display Problems

Image is displaced to the left/right or to the top/bottom

 If the image appears normal but off-center, you can adjust it using the

OSD functions. For further information, see chapter “Basic Setup”,

section “Auto Image Adjustment”.

Image flickers or is shaky

 Perhaps setup file chosen for the monitor is incorrect. For information on

monitor setup under Windows®9x/ME/2000/NT/XP consult the

“Configuration” section.

Image is blurred

 Check brightness and contrast settings (see chapter “OSD Menu

Functions”, section “Brightness/Contrast”).

 Check the resolution setting (see “Other” functions in the “OSD Menu

Functions” section).

Color problems

 If the colors are off (e.g. white is not really displayed as white, etc.), you

should adjust the color temperature (see “Color” function in section “OSD

Menu Functions”).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Envision

Envision

Envision EN-5100e Manual de usuario

Envision

Envision G2361 Manual de usuario

Envision

Envision Envision Professional G22LWK Manual de usuario

Envision

Envision G918w1 Manual de usuario

Envision

Envision G917w Manual de usuario

Envision

Envision EN9600 Manual de usuario

Envision

Envision H919w+ Manual de usuario

Envision

Envision G917w1 Manual de usuario

Envision

Envision G2470 Manual de usuario

Envision

Envision EN9110 Manual de usuario

Envision

Envision E218C1 Manual de usuario

Envision

Envision EN7450 Manual de usuario

Envision

Envision G19LWK Manual de usuario

Envision

Envision G2016wa Manual de usuario

Envision

Envision EN-7100e Manual de usuario

Envision

Envision EN9410e Manual de usuario

Envision

Envision H22W Manual de usuario

Envision

Envision H193WK Manual de usuario

Envision

Envision G912WA2 Manual de usuario

Envision

Envision H976WDL Manual de usuario

Envision

Envision EFT720 Manual de usuario

Envision

Envision H716a4 Manual de usuario

Envision

Envision G2460w Manual de usuario

Envision

Envision G218a1 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación