Entone Amulet 500 Series Manual de usuario
Amulet
Hybrid mediA Hub
500/550 Series Quick Start Guide
®
QUICK START GUIDEAMULET HYBRID MEDIA HUB
1
COPYRIGHT
©2013 Entone, Inc. All rights reserved. This document contains proprietary information protected by
copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written consent of Entone, Inc., 20863 Stevens Creek Blvd, Suite 300, Cupertino, CA 95014, U.S.A.
DISCLAIMER
IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPY-
RIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES
OR OTHER REMEDIES.
TRADEMARKS
Entone and the tagline“Connecting the Home” are trademarks of Entone, Inc. All other trademarks or
registered trademarks belong to their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellec-
tual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
CHANGES
The material in this document is for information only and is subject to change without notice. While rea-
sonable eorts have been made in the preparation of this document to assure its accuracy, Entone, Inc.
assumes no liability resulting from the use of the information contained herein. Entone, Inc. reserves the
right to make changes in the product design without reservation and without notication to its users.
P/N: 99-708004-11 - V1.0
Table of Contents
OVERVIEW
2 Safety Instructions
4 What’s Included
6 Front Panel
7 Top and Side Panel
8 Rear Panel
CONNECTING VIDEO
9 High-Denition TVs
11 Standard-Denition TVs
CONNECTING AUDIO
13 Stereo
14 Surround Sound
CONNECTING TV SOURCE
15 Cable or Antenna
16 CableCARD
CONNECTING NETWORK
17 Wireless or Wired
POWERING UP
18 Setting up Remote Control
19 Installing/Uninstalling USM Drive
21 Connecting to Power Source
22 Declaration of Conformity
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
32
Important Safety Instructions
• WARNING: To reduce the risk of re or electric shock, do not expose this ap-
paratus to rain or moisture.
• The apparatus shall not be exposed to dripping or splashing and that no ob-
jects lled with liquids, such as vases, shall be placed on the apparatus.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manu-
facturer’s instructions.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prongs are provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long peri-
ods of time.
• Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the ap-
paratus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• To reduce the risk of electric shock, DO NOT remove cover or back panel. No
user serviceable parts inside. Refer servicing to qualied personnel.
Important Safety Instructions (Continued)
• To help prevent electric shock, plug the power cable into properly grounded
sources. Use only properly grounded extension cords and adaptors, if they are
needed.
• The AC main plug is used as the disconnect device, the disconnect device shall
remain readily operable.
• Make sure nothing is lying on any of the cables.
• Be sure the cables are located where they will not be stepped on or tripped
over.
• Do not spill food or liquids onto the unit.
• Do not push any objects into the free slots. Doing so will damage the unit, can
cause re or electrical shock, and can short out interior components.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not block cooling vents.
• Do not place the equipment in a closed-in wall unit.
• When you disconnect a cable, pull on its connector or on its strain relief loop,
not on the cable itself. Some cables have a connector with locking tabs; if
you are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cables.
• When you connect a cable, make sure both connectors are correctly oriented
and aligned before connecting to avoid bending connector pins.
• For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the
equipment for easy access.
• Changes or modications not expressly approved by the party responsible
could void the user’s authority to operate this device.
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
54
Additional items that may be required (not included):
• Ethernet Cable
• Component Video Cable
• HDMI Cable
• RF Coaxial Cable
• Digital Audio Cable
• Network Router
• Multi-stream CableCARD (M-Card)
What’s Included
IR Remote Control*
2 Batteries for
Remote Control
Amulet Quick Start Guide Remote Control Guide*
Amulet Hybrid Media Hub
Ethernet Cable (Optional)
HDMI Cable (Optional)
AC Power Adapter*
Composite Audio/Video Cable
*The Remote Control may vary and is dependent on your service provider. *The AC Power Adapter may vary and is dependent on your service provider.
IR Extender Receiver (Optional)
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
76
Amulet — Front Panel
Name Description
1
Power Solid blue indicates the unit is on.
Solid red indicates the unit is in standby mode.
Flashing blue indicates the unit is booting up.
Press button once to put unit in standby mode, press
again to resume.
To reboot the device, press and hold button for at least
5 seconds.
2
SD Card Reader To read or transfer content from a compatible SD ash
memory card.
3
USB To connect USB devices such as USB ash drive and
external USB hard drive.
(max 500mA load)
4
Link Indicator Blue dot indicates that Ethernet or Wi-Fi network con-
nection is active.
5
CLOCK Displays current time set by your service provider. May
not display time while device is booting up.
6
Record Indicator Blue dot indicates a TV program is currently recording.
7
HD Indicator Blue dot indicates current program is playing in HD
(720p or higher) resolution.
8
USM Port For inserting a universal storage module (USM) hard
drive.
* Features may vary dependent on your service provider. Contact your service
provider for more details.
Amulet — Top and Side Panel
Name Description
1
Smart Card Port For use with SIM format Smart Card only.
(This is an optional item)
2
CableCARD Port For use with M-CARD only (provided by your service
provider).
(This is an optional item)
3
Eject Pin Hole For ejecting an M-CARD from the CableCARD port.
(This is an optional item)
4
7-way Navigation
+ MENU
Use Back, Menu, OK and Directional buttons to help
with navigating the user interface without a remote
control.
(Touch Panel is an optional item)
* Features may vary dependent on your service provider. Contact your service
provider for more details.
4
23
1
4
236
5
8
7
1
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
98
Amulet — Rear Panel
Name Description
1
Cable/ANT In For connecting to a cable TV or antenna source.
(Tuner is an optional item)
2
TV Out For connecting to an RF TV for loop-through.
(This is an optional item)
3
Composite Video For connecting to a standard-denition TV (SDTV).
4
Audio Stereo audio output (Left / Right).
5
Component
Video
For connecting to a high-denition TV (HDTV).
6
IR Extender Port For connecting an IR Extender Receiver.
7
Digital Audio For connecting to an entertainment system that sup-
ports 5.1 Surround Sound audio.
8HDMI For connecting to a high-denition TV (HDTV).
9Ethernet For connecting to a wired network.
10 USB To connect USB devices such as USB ash drive and
external USB hard drive.
(max 500mA load)
11 Power DC power jack (100-240V, Output 12V/3A).
* Features may vary dependent on your service provider. Contact your service
provider for more details.
7
4
6
125
3
89
10
11
STEP 1: CONNECTING VIDEO
Amulet provides up to four video options for connecting
to your TV: HDMI, Component Video, Composite Video and
Coaxial. Select a video option then proceed to”Connecting
Audio” on page 13.
Make sure your TV is turned on and the correct video input is
selected.
Option 1: HDMI (Recommended)
If your TV has an HDMI connection,
use an HDMI cable (may not be
included) and connect Amulet to the HDMI IN port on your TV.
This connection provides both video and audio so you do not
need a separate audio connection. Proceed to
“Connecting TV Source” on page 15.
Delivers the best video & audio
quality via a single cable
S-VIDEO
Cable is optional and
may not be included
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
1110
Option 2: Component Video
Use a Component cable (not provid-
ed) and connect the red/blue/green
cables to the COMPONENT VIDEO IN
port on your TV. Then proceed to the next step (“Connecting
Audio”) to connect the red/white cables.
If you have already selected HDMI as your video connection,
then do not use this cable.
Cable not included
Component Video
Delivers excellent picture
quality
S-VIDEO
Option 3: Composite Video
Use the Composite cable provided
and connect the yellow cable to the
yellow VIDEO IN port on your TV.
Then proceed to the next step (“Connecting Audio”) to con-
nect the red/white cables.
If you have already selected HDMI as your video connection,
then do not use this cable.
Composite Video
Delivers good picture quality
Cable included
S-VIDEO
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
1312
Option 4: Coaxial (Optional)
Use a Coaxial cable (not provided)
and connect the cable to the AN-
TENNA IN port on your TV. This con-
nection provides both video and audio so you do not need a
separate audio connection. Proceed to“Connecting TV Source”
on page 15.
If you have already selected HDMI as your video connection,
then do not use this cable.
Coaxial Cable
Delivers good picture quality
Cable not included
S-VIDEO
ANT IN
STEP 2: CONNECTING AUDIO
Amulet has two audio options: Stereo or Surround Sound.
Select an audio option and proceed accordingly.
NOTE: If you have already selected HDMI or Coaxial as your
video connection, then skip this audio section and proceed to
“Connecting TV Source” on page 15.
Option 1: Stereo
Use the Composite cable provided and connect the red and
white cables to the Amulet A/V Out port and the red and
white cables to the AUDIO IN port on your TV.
S-VIDEO
Cable included
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
1514
Cable not included
Option 2: Surround Sound
If your TV is connected to an A/V Receiver that supports Dolby
Digital 5.1 Surround Sound, use a digital audio cable (sold
separately) to connect Amulet to the OPTICAL AUDIO IN port
on your A/V Receiver.
STEP 3: CONNECTING TV SOURCE OPTIONAL
You can connect an RF coaxial cable (sold separately) from
Amulet to either a Cable TV or antenna source. Select a TV
source and proceed accordingly.
Option 1
Connect to basic unencrypted Cable TV Source.
Option 2
Connect to Antenna Source (Outdoor or Indoor Antenna).
Option 3
Connect to premium Cable TV Source with CableCARD.
NOTE: If you have not selected premium Cable TV Source,
then proceed to”Connecting Network”.
Cable not included
QUICK START GUIDE
QUICK START GUIDE
AMULET HYBRID MEDIA HUB
AMULET HYBRID MEDIA HUB
1716
Installing CableCARD (Optional)
CableCARD is a PCMCIA card that allows access to premium
digital cable programming. CableCARDs are available from
your local cable service provider. It is an optional feature for
Amulet. Contact your service provider for more details.
1. Insert the CableCARD properly into the device.
2. The CableCARD will need to be paired with your cable TV
service. Refer to the instructions from your service provider
for more details on how to pair your CableCARD.
NOTE: The pairing process may take a few minutes or some-
times a few hours depending on your cable service provider.
If you have not received your premium programming in one
hour, please call your service provider for troubleshooting tips.
CableCARD not included
STEP 5: CONNECTING NETWORK
Select from one of the following networking options.
Option 1: Wireless
Connect your Amulet to a Wireless Network Router or Access
Point.
NOTE: Internal Wi-Fi is an optional feature for Amulet. Contact
your service provider for more details and instructions on how
to congure Amulet for your wireless network.
Option 2: Wired
Connect an Ethernet cable (may not be included) from Amulet
to a cable/DSL modem or Network Router.
Router not included
Cable is optional and
may not be included
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
