Enginko MCF-LW12CO2E Manual de usuario

2022/05/21 05:34 1/2 manual_mcf-lw12co2e

e n g i n k o . s u p p o r t . c e n t e r - http://enginko.com/support/

Table of Contents

MCF-LW12CO2E Operating Manual 1 ............................................................................................

1. Description 1 ................................................................................................................................

2. Overview 2 ....................................................................................................................................

2.1 Technical data 2 .........................................................................................................................

2.2 Installation 3 ..............................................................................................................................

2.3 Power ON/OFF 4 .........................................................................................................................

2.4 System leds 6 .............................................................................................................................

2.5 Battery 6 ....................................................................................................................................

2.6 Firmware update 10 ...................................................................................................................

3 LEDs 10 ...........................................................................................................................................

3.1 Brightness 10 .............................................................................................................................

4. Measures 11 ..................................................................................................................................

4.1 Period 12 ....................................................................................................................................

4.2 Temperature 12 .........................................................................................................................

4.3 Pressure 13 ................................................................................................................................

4.4 Humidity 13 ...............................................................................................................................

4.5 Lux 13 ........................................................................................................................................

4.6 VOC 13 .......................................................................................................................................

4.7 CO2 15 .......................................................................................................................................

4.8 Thresholds 16 ............................................................................................................................

5 LoRaWAN network 18 ...................................................................................................................

5.1 Activation 19 ..............................................................................................................................

5.2 Other settings 20 .......................................................................................................................

6 Passwords 21 .................................................................................................................................

7 Conﬁguration ﬁle 24 .....................................................................................................................

7.1 Multi devices conﬁguration 25 ...................................................................................................

8 LoRaWEB Tool 26 ...........................................................................................................................

9 Payload 27 ......................................................................................................................................

10 Declaration of conformity 27 ....................................................................................................

11 Contacts 27 ..................................................................................................................................

Last update: 2022/03/30 11:14 manual_mcf-lw12co2e http://enginko.com/support/doku.php?id=manual_mcf-lw12co2e

http://enginko.com/support/ Printed on 2022/05/21 05:34

2022/05/21 05:34 1/27 manual_mcf-lw12co2e

e n g i n k o . s u p p o r t . c e n t e r - http://enginko.com/support/

MCF-LW12CO2E Operating Manual

Important safety information

Read this manual before attempting to install the device! Failure to observe

recommendations included in this manual may be dangerous or cause a violation of the

law. The manufacturer will not be held responsible for any loss or damage resulting from

not following the instructions of this operating manual.

Do not dismantle or modify in any way.

The device is only intended for indoor use. Do not expose it to moisture.

The device is not intended to be used as a reference sensor, and enginko Srl will not be held

liable for any damage which may result from inaccurate readings.

Avoid mechanical stress

Do not use any detergent or alcohol to clean the device.

Disposal information for users

Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the

European Parliament on waste electrical and electronic equipment (WEEE), and

pursuant to and in accordance with Article 20 of the Directive 2013/56/EU of the

European Parliament on batteries and accumulators and waste batteries.

The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful

life, the product must be collected separately from other waste.

Please note that the lithium batteries must be removed from the equipment before it is given as

waste and disposed separately. To remove the batteries refer to the speciﬁcations in the user manual.

For additional information and how to carry out disposal, please contact the certiﬁed disposal service

providers.

1. Description

The MCF-LW12CO2E is a battery powered sensor for indoor applications that reads temperature,

relative humidity, pressure, ambient light, IAQ air quality index and CO2. The device sends collected

data over the LoRaWAN® network. Ideally suited for a wide range of applications such as home

buildings, air quality monitoring and energy saving applications.

Last update: 2022/03/30 11:14 manual_mcf-lw12co2e http://enginko.com/support/doku.php?id=manual_mcf-lw12co2e

http://enginko.com/support/ Printed on 2022/05/21 05:34

2. Overview

2.1 Technical data

Cortex M0 + CPU

EEProm 32Kb

64k ﬂash

AES 128 bit encryption

LoRaWAN® stack class A 1.0.2 EU868, AS923, AU915 and US915

Temperature -10 ÷ 60°C (± 0.5°C)

Humidity 0 ÷ 100% (20 ÷ 80% ± 3% @ 25°C, 0 ÷ 20% * 80 ÷ 100% ± 5% @ 25°C)

Pressure 300 ÷ 1100hPa (± 1hPa)

Light sensor 0.01 ÷ 80000 lux (± 15%)

IAQ index 0 ÷ 500

bVOC 500ppb ÷ 16'700ppm (sensor to sensor deviation ± 15%)

CO2 300 ÷ 5000 ppm (± 50ppm ± 3% of reading)

3 traﬃc light LEDs for air quality display (CO2, bVOC or both) with adjustable brightness

4 conﬁgurable thresholds for LEDs driving and real time measurement message

Battery powered with 4 years of battery life (SF = 12, 10 minutes reading period)

Battery capacity (included) 21600mAh

NFC for node conﬁguration, FW update and data reading

Indoor installation

Storage temperature -20 + 80°C

Operating temperature -10 + 60°C

Dimensions: 120x80x25mm

2022/05/21 05:34 3/27 manual_mcf-lw12co2e

e n g i n k o . s u p p o r t . c e n t e r - http://enginko.com/support/

Weight ~ 225g

2.2 Installation

To ensure correct operation and reliable and consistent measurements, install the MCF-LW12CO2E

sensor away from direct sunlight and heating sources like radiators, conveyors, TV, lights etc. and far

away from doors and windows.

The device must be placed where the LoRaWAN® signal coverage is good (SF = 7 optimal, SF = 12

weak). The sensor must be installed vertically on a wall at about 1.5mt height. It must be at least

30cm away from metal objects, and 1mt away from electronic devices.

Last update: 2022/03/30 11:14 manual_mcf-lw12co2e http://enginko.com/support/doku.php?id=manual_mcf-lw12co2e

http://enginko.com/support/ Printed on 2022/05/21 05:34

2.2.1 LoRa Tool

To deploy the sensor, download the latest LoRa Tool Android App to setup LoRaWAN credentials and

other preferences :

Always validate your settings by reading the NFC data after the sensor has restarted.

2.3 Power ON/OFF

The sensor is shipped completely oﬀ to prevent battery consumption during storage. It is therefore

necessary to carry out a ﬁrst power-on prior to commissioning.

There are two ways to power on the sensor:

With NFC: Move the NFC antenna of the mobile (the exact position varies depending on the

model of the smartphone) to the sensor antenna, in the area shown in the ﬁgure:

Mechanical power on:

Open the case using a screw driver as follow:

2022/05/21 05:34 5/27 manual_mcf-lw12co2e

e n g i n k o . s u p p o r t . c e n t e r - http://enginko.com/support/

By using a screw driver push button for 1s as follow, moving right:

Close the plastic case. Switch-on is visible by ﬂashing of red and green leds.

At the ﬁrst power-on, sensor will take from 1 to 3 minutes to give an eﬀective measure of CO2.

In case of long period inactivity, if necessary, is possible to shut-oﬀ again the sensor to prevent

battery consumption, via downlink or with LoRa Tool App:

Last update: 2022/03/30 11:14 manual_mcf-lw12co2e http://enginko.com/support/doku.php?id=manual_mcf-lw12co2e

http://enginko.com/support/ Printed on 2022/05/21 05:34

2.4 System leds

LoRaWAN® not conﬁgured Slow ﬂashing

Joining Quick ﬂashing

Sending Quick ﬂashing

Receiving Quick ﬂashing

Steady state Fixed

Data error Flashing 2 seconds

Connection error Flashing 1 second

2.5 Battery

This sensor contains lithium battery, which must be disposed of separately.

MCF-LW12CO2E is provided with two Li-SOCl2 battery packs:

Code Description

MCF-1S4PE 14400mAh battery pack

MCF-1S2PE 7200mAh battery pack

Sensor needs both battery packs, otherwise performance and battery life are not guarantee.

This is the estimated battery life (in years) in the worst conditions:

2022/05/21 05:34 7/27 manual_mcf-lw12co2e

e n g i n k o . s u p p o r t . c e n t e r - http://enginko.com/support/

10min reading 15min reading 30min reading

SF12 4,06 5,08 6,78

SF7 6,46 7,36 8,55

2.5.1 Battery replacement

Battery packs must be replaced together, do not let the sensor run with battery packs with diﬀerent

levels of charge.

remove the back panel of the sensor with a small screwdriver:

detach the batteries from the electronic board (batteries are secured with dual locking tape)

and disconnect both from the connectors:

Last update: 2022/03/30 11:14 manual_mcf-lw12co2e http://enginko.com/support/doku.php?id=manual_mcf-lw12co2e

http://enginko.com/support/ Printed on 2022/05/21 05:34

Connect the new batteries and put them in place (replace the tape if needed):

Tabla de contenidos

Otros manuales de Accesorios de Enginko

Enginko

Enginko EGK-LW20W00 Manual de usuario

Enginko

Enginko MCF-LW12TERWP Manual de usuario

Enginko

Enginko MCF-LW12TERPM Manual de usuario

Enginko

Enginko mcf88 MCF-LW12TERWP Manual de usuario

Enginko

Enginko mcf88 MCF-LW12VOC Manual de usuario

Enginko

Enginko MCF-LW12TERWP Manual de usuario

Enginko

Enginko EGK-LW20L00 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario