ENFORCER MVE-AH010Q Manual de usuario
HDMI Extender Over Cat5e/6
Manual
1080p
FULL
Resolution
Up to 196’ (60m)
MVE-AH010Q
Extend HDMI over two (2) inexpensive Cat5e/6 cables.
Supports resolution from 480i to 1080p with zero signal loss.
Transmits up to 196’ (60m) at 1080p over two (2) Cat6 cables.
Plug and play operation—comes as a complete set.
NOTE: Model numbers that end with ―Q‖ or products that have a round green ―Q‖ sticker signify RoHS compliance.
ENFORCER ®HDMI Extender Over Cat5e/6
2 SECO-LARM U.S.A., Inc.
Features:
Input video signal
0.5~1.0 Vp-p
Input DDC signal
5 Vp-p (TTL)
Maximum single link range
1920 x 1200, 1080p
Output video
HDMI
Video format supported
1080p/1080i/720p/576p/576i/480p/480i
Max range (1080p)
196’ (60m)
Max range (1080i)
230’ (70m)
Max range (480p)
328' (100 m)
Size
31/8x 13/4x 7/8" (79 x 44 x 22 mm)
Weight
8.7 oz (246 g)
Power Consumption
400mA @ 5VDC
Operating temperature
32°~158° F (0°~70° C)
External power supply
5VDC@2A (adapter included) (2.1mm plug)
The HDMI over Cat5e/6 extends the range of traditional HDMI cabling methods up to
196’ (60m). The HDMI over Cat5e/6 uses an active transmitter to send video and audio
over Cat5e/6 cables in HDMI formats as large as 1080p. The HDMI signal that is
transmitted between the two units has zero-signal loss by using integrated circuits
located in the receiver and transmitter.
Flexibility –Traditional HDMI cables present a number of challenges in long cable runs. HDMI
cables are rigid in structure and fixed in length making them very difficult to use in some
applications. By using Cat5e/6 to transmit HDMI signals, the length and route the wiring takes can
now be determined on an application by application basis.
Signal Strength –Traditional HDMI cables have limitations on the signal strength they can provide
over long distances. Using an active transmitter, the HDMI over Cat5e/6 overcomes these
limitations by providing a clearer signal farther than HDMI cable alone.
Distance –The HDMI over Cat5e/6 is capable of providing a clear HDMI signal over much greater
distances than HDMI cable alone. Using Cat6, a 1080p HDMI signal can be transmitted clearly up
to 196’ (60 m).
Formats Supported –The HDMI over Cat5e/6 supports both progressive and interlaced formats:
1080p/1080i/720p/576p/576i/480p/480i.
Plug and Play –The HDMI over Cat5e/6 comes as a complete set consisting of a transmitter and
receiver. No adjustments or settings must be made, the unit is ready to use right out of the box.
Zero Signal Loss –Integrated circuits in the transmitter and receiver clean, buffer and amplify the
HDMI signal to prevent signal loss and ensure a clear signal regardless of the length of the cable.
DVI Support –The HDMI over Cat5e/6 can be used with an HDMI to DVI adapter to support
multiple components of a home theater system.
Specifications:
Parts list:
Introduction:
1 x Transmitter
1 x Receiver
1 x 5VDC power adapter
1 x Manual
ENFORCER ®HDMI Extender Over Cat5e/6
SECO-LARM U.S.A., Inc. 3
Installation:
1. Determine the locations where the HDMI to Cat5e/6 units will be placed as well as how much
Cat5e/6 cable will be necessary.
2. Connect the HDMI to Cat5e/6 transmitter to the HDMI port of the source device via HDMI cable.
3. Connect the HDMI to Cat5e/6 receiver to the HDMI port of the display or other device via HDMI
cable.
4. Connect Cat5e/6 cables to both the receiver and transmitter units. Make sure to connect the
cables to their respective ports, i.e. port 1 connected to port 1, and port 2 connected to port 2.
NOTE: Using Cat5e cable will greatly extend range of HDMI transmission, but for maximum
range please use Cat6 cable.
5. Connect the 5VDC adapter to the transmitter unit.
6. Turn ON the HDMI source and display, etc., devices to test the functionality of the HDMI over
Cat5e/6 system.
Sample Application:
HDMI Cable
HDMI Cable
HDTV Source
HDTV Display
1
1
2
2
Transmitter
Receiver
Two (2) Cat5e/6 Cables
Included 5VDC
Power Adapter
MVE-AH010-TQ*
MVE-AH010-RQ*
Overview:
CAT5e-1
CAT5e-2
ENFORCER
HDMI over CAT5 Extender
Receiver
2 RJ-45 Inputs
HDMI Output
HDMI Output
5VDC Power Input
Use T568B UTP wiring standard
Use T568B UTP wiring standard
Two (2) Cat5e/6 cables are required. Please use T568B wiring standard.
MVE-AH010Q
(receiver shown)
*Transmitter (MVE-AH010-TQ) and receiver (MVE-AH020-RQ) are only sold as a pair.
ENFORCER ®HDMI Extender Over Cat5e/6
4 SECO-LARM U.S.A., Inc.
Troubleshooting
HDMI device does not function correctly Make sure the Cat5e/6 cables are connected to the
correct ports, and not to opposite ports
Make sure the HDMI input device is turned on.
Make sure the HDMI output device is turned on.
Test the Cat5e/6 cable between the receiver and
transmitter to make sure it is operational.
Products Available from SECO-LARM:
USB over Cat5/6
VGA over Cat5/6
HDMI Repeater
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326 E-mail: sales@seco-larm.com
MiMVE-AH010Q_1102.docx
PICCN3
.docx
HDMI Cable
Audio Baluns
HDMI Switcher
Tabla de contenidos
Otros manuales de Extensor de ENFORCER
ENFORCER
ENFORCER MVE-AH030AQ Manual de usuario
ENFORCER
ENFORCER NE-AE01-030TQ Manual de usuario
ENFORCER
ENFORCER Enforcer MVE-AT11-01NQ Manual de usuario
ENFORCER
ENFORCER ENHANCED MVE-AH1H1-42YQ Manual de usuario
ENFORCER
ENFORCER MVE-AH1E1-01NQ Manual de usuario
ENFORCER
ENFORCER NR-P101E-TQ Manual de usuario
ENFORCER
ENFORCER MVE-AH1H1-02ZQ Manual de usuario
ENFORCER
ENFORCER MVE-AH010Q Manual de usuario
ENFORCER
ENFORCER MVE-AH020Q Manual de usuario
ENFORCER
ENFORCER MVE-AH030Q Manual de usuario
ENFORCER
ENFORCER MVE-AH1E1-01NQ Manual de usuario
ENFORCER
ENFORCER MVE-AH1E1-41NQ Manual de usuario
ENFORCER
ENFORCER SECO-LARM NR-P102E-TQ Manual de usuario
ENFORCER
ENFORCER MVE-WH010Q Manual de usuario
ENFORCER
ENFORCER MVE-AH010Q Manual de usuario
ENFORCER
ENFORCER MVE-AHMPM-01NQ Manual de usuario
ENFORCER
ENFORCER DE-S104Q Manual de usuario
ENFORCER
ENFORCER MVE-AH1T1-01YQ Manual de usuario
ENFORCER
ENFORCER NE-SE01-020Q Manual de usuario
ENFORCER
ENFORCER MVE-AHMPM-01NQ Manual de usuario
