Enable-IT 8808F Instrucciones de montaje
!
Enable-IT 8808F SFP
Gigabit Ethernet PoE Fiber Switch
Installation Manual Guide
Professional Grade Networking!
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc.
PREFACE
The user manual mainly introduces the product shape, product positioning, hardware installation, web
management and other related information.
ILLUSTRATION
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !249
CONTENTS
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !349
1 PRODUCT INTRODUCTION …………………………………………………………………………….. 5
1.1 Overview………………………………………………………………………………………………… 5
1.2 Product Features……………………………………………………………………………………….. 5
1.3 Board Diagrams………………………………………………………………………………………… 5
1.4 Specifications.…………………………………………………………………………………………… 7
2 INSTALLATION………………………………………………………………………………………………. 8
2.1 8808F Package Contents………………………………………………………………………………. 8
2.2 Installation Precautions…………………………………………………………………………………. 8
2.2.1 Safety Precautions………………………………………………………………………………. 8
2.2.2 Installation Requirements……………………………………………………………………….9
2.2.3 The Requirements of Electromagnetic Environments………………………………………. 9
2.3 Installation Methods…………………………………………………………………………………… 9
2.3.1 Din-rail Installation………………………………………………………………………………. 10
2.3.2 Wall-hung Installation ……………………………………………………………………………. 10
2.4 Cable Connection………………………………………………………………………………………. 10
2.4.1 Device Connection……………………………………………………………………………….. 10
2.4.2 Configuration Cable Connection……………………………………………………………….. 10
2.4.3 Power Cable Connection……………………………………………………………………….. 11
3 FUNCTION CONFIGURATION GUIDE…………………………………………………………………… 11
3.1 Computer Requirements………………………………………………………………………………. 11
3.2 Set Up Network Connection…………………………………………………………………………… 11
3.2.1 Set Static IP for the Management Computer………………………………………………….. 12
3.2.2 Confirm the Network Connection by Ping Command………………………………………… 13
3.2.3 Cancel the Proxy Server…………………………………………………………………………. 14
3.3 Web Page Configuration Guide……………………………………………………………………….15
3.3.1 Start and Login…………………………………………………………………………………… 15
3.3.2 Change Language……………………………………………………………………………….. 16
3.3.3 Common Buttons Introduction …………………………………………………………………. 16
3.3.4 The Default Configuration……………………………………………………………………….17
3.3.5 Web User Timeout………………………………………………………………………………. 17
3.3.6 Backup System Configuration Information……………………………………………………. 17
3.3.7 Restoring the Configuration Information………………………………………………………. 18
3.3.8 Quit………………………………………………………………………………………………… 18
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !449
4 WEB MANAGEMENT ……………………………………………………………………………………… 18
4.1 System Status…………………………………………………………………………………………… 18
4.2 Port Configuration……………………………………………………………………………………….. 19
4.2.1 Port Setting…………………………………………………………………………………………. 19
4.2.2 Port Speed Limit.…………………………………………………………………………………… 21
4.3 VLAN Settings…………………………………………………………………………………………….. 22
4.3.1 VLAN Configuration ……………………………………………………………………………… 22
4.3.2 VLAN Forwarding…………………………………………………………………………………. 24
4.4 Trunk Management……………………………………………………………………………………… 25
4.4.1 Trunk……………………………………………………………………………………………….. 25
4.4.2 RSTP………………………………………………………………………………………………. 26
4.5 Port Security……………………………………………………………………………………………… 29
4.5.1 Status Address Latch……………………………………………………………………………… 29
4.5.2 802.1X Certificates ……………………………………………………………………………….. 30
4.6 Web Management……………………………………………………………………………………….. 32
4.6.1 SNMP Settings…………………………………………………………………………………….. 32
4.6.2 Email Alarm…………………………………………………………………………………………. 33
4.6.3 Port Mirror…………………………………………………………………………………………… 34
4.6.4 Multicast Snooping…………………………………………………………………………………. 35
4.7 Network Statistics…………………………………………………………………………………………. 36
4.7.1 Network Statistics………………………………………………………………………………….. 36
4.7.2 MAC Address……………………………………………………………………………………….. 37
4.8 System Management…………………………………………………………………………………… 38
4.8.1 IP Address………………………………………………………………………………………….. 38
4.8.2 User Management…………………………………………………………………………………. 38
4.8.3 Log Information…………………………………………………………………………………….. 39
4.8.4 File Management……………………………………………………………………………………. 41
4.9 PoE Management……………………………………………………………………………………….. 42
4.10 QoS Management……………………………………………………………………………………… 43
4.10.1 QoS Settings………………………………………………………………………………………. 43
4.10.2 DSCP / TOS QoS…………………………………………………………………………………. 45
TECHNICAL SUPPORT………………………………………………………………………………………….. 46
ENABLE-IT WARRANTY POLICY………………………………………………………………………………. 47
CONTACT US………………………………………………………………………………………………………. 49
1 PRODUCT INTRODUCTION
1.1 Overview
The 8808F SFP Gigabit Ethernet & PoE Fiber Switch is a an all-in-one robust solution. Provides (8)
10/100/1000 Base-T RJ-45 ports with built in IEEE 802.3af/at PoE support up to 328ft / 100m allowing you to
connect several IP security cameras or PoE devices. Support up to 4 1000 Base-X SFP (Small Form-Factor
Pluggable) modules for connecting your fiber network for high speed data computing. The perfect robust
Ethernet / Fiber all-in-one solution with web management for easy configuring of VLAN, QoS, RSTP, SNMP.
etc.
1.2 Product Features
•Fully supports IEEE 802.3af/at PoE standard up to 328ft / 100m
•PoE output LAN T1: 60W PoE+, LAN T2-8: 30W PoE
•Supports Web-based network management - VLAN, QoS, RSTP, SNMP, etc.
•Supports 4K High-Definition (HD) video transmission - buffer reaches 4Mbit
•Relay alarm for power off, network down, and PoE off
•6KV surge immunity, 8KV ESD protection and anti-interference ability
•Supports fast ring, self-healing in 20ms
•Input voltage 48V ~ 57V DC
•Bandwidth 24Gbps backplane
•Supports 40°F to 167°F (-40°C to 75°C) wide range temperature
•Perfect solution for robust IP Surveillance camera networks
1.3 Board Diagram
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !549
1.3 Board Diagram
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !649
1) Device must be connected with lightning protection grounding; Otherwise protection
level will reduce - Connect the wiring to the grounding terminal
2) Relay alarm function is off by default. If you want to turn it on your must enter the
web management: 192.168.1.200 -> system management -> alarm management
Caution
1.4 SPECIFICATIONS
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !749
ITEM
HPoE SWITCH
PoE SWITCH
ETHERNET
SWITCH
POWER
Power Supply
Power Adapter
Voltage Range
48 ~ 57V DC
12 ~ 57V DC
Consumption
Self consumption <30W; Maximum PoE
Output <150W
Self consumption
<30W
PORT
Ethernet Port
T1 ~ T8 RJ-45: 10/100/1000 Base-T
X1 ~ X4 SFP: 1000 Base-X
Distance
RJ-45 Ports: 0 - 328ft (0 - 100m)
SFP Ports depend on the SFP modules
PoE Standard
IEEE 802.3af, IEEE 802.3at, end-span
HPoE (60W) T1 only supported
N/A
PoE Output
Port T1 < 60W
Port T2~T8 < 30W
Each port < 30W
N/A
NETWORK SWITCH
Packet Forwarding
Rate
18Mpps (Supports Super Jumbo Frames)
Switch Capacity
24Gbps
Packet Buffer
4Mb
MAC Address
8K
ALARM
Relay Alarm
Power no-input, Ethernet link off, PoE link off alarm by relay turn
over
MANAGEMENT
Management
Management L2+PoE
STATUS INDICATOR
Power
2* Red LED
RJ-45 LAN
Link / Acting: Green LED
PoE: Yellow LED
SFP
Link: Green LED
PROTECTION
Surge
6KV, Per: IEC61000-4-5
EMC
ESD: Class 4 Per: IEC61000-4-2
RS: Class 4 Per: IEC61000-4-3
EFT: Class 4 Per: IEC61000-4-4
CS: Class 4 Per: IEC61000-4-6
1.4 Specifications
2 INSTALLATION
2.1 8808F Package Contents
•(1) 8808F Gigabit Ethernet & PoE Fiber Switch Unit
•(1) Country Specific Power Adapter
•(1) 8808F Gigabit Ethernet & PoE Fiber Switch Quickstart Guide Manual
2.2 Installation Precautions
To avoid damaging the 8808F device or personal injury by improper use, please observe the following
precautions.
2.2.1 Safety Precautions
This is a Level A product, which may cause radio disturbance in a living environment. Users may need
to take corresponding and effective measures to adjust for this.
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !849
Anti-counterfeiting label is attached to the 8808F Switches cover. Product damage caused
by unauthorized disassembly is not covered under the Enable-IT Limited Lifetime
Warranty.
Caution
ITEM
HPoE SWITCH
PoE SWITCH
ETHERNET
SWITCH
ENVIRONMENT
Operating
Temperature
40°F to 167°F (-40°C to 75°C)
Storage
Temperature
40°F to 167°F (-40°C to 85°C)
Humidity
0 ~ 95% (non-condensing)
MECHANICAL
Dimensions
Height: 1.8 inches (46.5mm)
Depth: 4.3 inches (110mm)
Width: 6.3 inches (169mm)
Material
Aluminum Alloy
Color
Black
Weight
1.7 lbs (750g)
•Remove the power plug before cleaning the 8808F switch. Do not use a wet or damp cloth
nor liquid solution to wire or wash the device.
•Do not leave the switch near water or in a wet place so as to prevent water or dampness from
entering into the switch.
•Make sure the switch is installed in a clean environment. Excessive dust may cause
electrostatic adsorption, which will affect the equipment lifespan and cause communication
failures.
•The switch will work normally under the correct voltage. Please ensure the voltage indicated
on the switch corresponds to the power voltage.
•To avoid the dangers of electric shock, please do not open the switch case.
•Do not open the switch case even if the unit is powered off.
•The accessories (including but not limited to the power cables, etc.) can be used only for the
8808F switch, prohibited use for other applications.
2.2.2 Installation Requirements
The 8808F device should work in indoor or properly housed outdoor environments to avoid
electrical damage from adverse weather conditions. It is important to obey the following
requirements regardless if installed in a cabinet or on the work bench directly:
•Allow enough space (larger than 4inches / 10cm) for an air outlet to allow proper heat
dissipation; a good ventilation system for cabinets and workbench is advised.
•Ensure the cabinet and workbench is sturdy enough to support the switch and it’s
accessories weight.
•Cabinet and workbench grounded is advised.
2.2.3 The Requirements of Electromagnetic Environment
When the switch is operational, if may be affected by external interference outside the system
via radiation and conduction. Please be wary of the following:
•AC power supply is a TN system, so it is necessary to use a single phase power socket (PE)
which can protect the ground wire so that the filter circuit can effectively filter out the power
grid disturbances.
•The switch should work far away from high-power radio transmitters, radar transmitters,
high-frequency devices.
•Use electromagnetic shielding if necessary, such as shielded cabling.
•Interface cables should be arranged indoor rather than outdoor to prevent over-voltage or
over-current damage to the signal port.
2.3 Installation Methods
There are 3 ways you can install the 8808F Switch: In a rack, on a workbench or in a wall-hung installation.
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !949
Please pull out the power plug before installing or moving the switch. Grounding and
lightning protection can greatly increase the protection level of the switch. Connect the
grounding terminal on the device to the earth ground.
Caution
2.3.1 Din-rail Installation
Installation process:
1) Install the Din-rail hanger to the switch
2) Install the switch to the Din-rail
2.3.2 Wall-hung Installation
You can install the switch to the clean
and stable wall.
2.4 Cable Connection
2.4.1 Device Connection
Use cross network cable or cross-over cable to connect your PC or other devices with the
8808F switch’s Ethernet port.
2.4.2 Configuration Cable Connection
Use a network cable to connect the switch to a PC or other LAN device via the Ethernet port, not
theconsoleport.(Note: The VLAN ID of the 8808F Ethernet port must 1) Switch must be
connectedtotheManagementPCandusethatPCtoconfigurethe8808FSwitch.)
All Rights Reserved © 1997 - 2017 Enable-IT™, Inc. Page !of !10 49
Figure 2-3 Connect configuration cable
Tabla de contenidos
Otros manuales de Cambiar de Enable-IT
