Emplus WAP385 Manual de usuario
0
User Manual
WAP385
WAP385-C
Version 1.0
1
Installation
2
3
Chapter1
Product
Overview
4
Introduction
Key Features
The 802.11ax high performance Access Point with MU-MIMO and OFDMA technology for high-density use on multiple
applications
Emplus Wireless Access Point solution is designed for versatile outdoor applications. To meet various requirements for different
networking environment, Emplus provides the most flexible and effective solutions as your expectations.
The state-of-the-art 802.11ax and MU-MIMO technology brings high performance on connecting speed and bandwidth.
WAP385 equips with two powerful RF interfaces which support up to 2402Mbps in 5GHz frequency band and 573Mbps in
2.4GHz frequency band.
5
Physical Interface (WAP385/WAP385-C)
NOTE:
1. WAP385: 2.5G LANx1 + 1G LANx1 + NOR Flash
2. WAP385-C: 2.5G LANx1 (remove 1G LAN + NOR Flash)
1GbE RJ45 is not available for WAP385-C model
6
Physical & Environment
Power Source
DC Input: 12 VDC/1.5A
PoE: compatible with 802.3at or Passive PoE
Internal High Gain Antenna
(Peak Gain)
~4.93dBi 2.4GHz antennas
~6.43dBi 5GHz antennas
Interface
1 x 10/100/1000/2500Mbps Ethernet Port with 802.3at PoE
1 x 10/100/1000Mbps Ethernet Port(Not available for WAP385-C model)
1 x reset button
1x DC IN
Dimensions (W x D x H)
160x160x30 mm
Mounting
Ceiling Mount/Wall mount
Environment
Operating temperature: -0°C~40°C
Operating humidity: 0%~90% typical
Technical Specifications
Storage temperature: -20°C~70°C
*This equipment is only to be connected to PoE networks without routing to outside plants.
7
Applications
Wireless LAN (WLAN) products are easy to install and highly efficient. The following list describes some of the many
applications made possible through the power and flexibility of WLANs:
Difficult-to-Wire Environments: There are many situations where wires cannot be installed, deployed easily, or
cannot be hidden from view. Older buildings, sites with multiple buildings, and/or areas that make the
installation of a Ethernet-based LAN impossible, impractical or expensive are sites where WLAN can be a
network solution.
Temporary Workgroups: Create temporary workgroups/networks in more open areas within a building;
auditoriums, amphitheaters classrooms, ballrooms, arenas, exhibition centers, or temporary offices where one
wants either a permanent or temporary Wireless LAN established.
The Ability to Access Real-Time Information: Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse
Workers can access real-time information while dealing with patients, serving customers, and/or processing
information.
Frequently Changing Environments: Set up networks in environments that change frequently (i.e.: Show
Rooms, Exhibits, etc.).
Small Office and Home Office (SOHO) Networks: SOHO users require a cost-effective, easy, and quick
installation of a small network.
Training/Educational Facilities: Training sites at corporations or students at universities use wireless
connectivity to exchange information between peers and easily access information for learning purposes.
8
Chapter2
Before You Begin
9
Computer Settings
Windows XP/Windows 7/Windows 8/Windows 10
In order to use the Access Point, you must first configure the
TCP/IPv4connectionofyourWindowsOScomputersystem.
1a. Click the Start button and open the Control Panel
WindowsXP Windows7
1b. Move your mouse to the lower right hot corner to display the Charms
Bar and select the Control Panel in Windows 8OS.
Windows 8
1c. In Windows10, click Start to select All APP stoenter the folder of
Windows system for selecting Control Panel.
Windows 10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de Emplus
