EMIX EMKP-8001 Guía de inicio rápido
1
OPERATIONAL MANUAL
EMKP-8001
180 Zones Paging Microphone
Version 1.4
2
Produc Overview
The EMKP-8001 is a 180 zones digital paging microphone. As the name digital paging microphone, EMKP-8001
operates digitall . On each paging microphone it is possible to select 180zones with the possibilit to connect
up to 30 paging console b using single CAT-5E extension cable. Through a 4X20 characters LCD panel on top
of the paging console is used for showing more reliable information such as selected zone, t pe of chime,
priorit and other user is on call on the moment. Furthermore, this EMKP-8001 equipped with a cardioid
condenser microphone which offers minimum sensitivit at an angle of 180 degrees, reducing pick up of
sounds from the rear. It’s also tightl controlled unidirectional polar pattern provides excellent ambient noise
control allowing the wanted speech stand out from the background of nois confusion and features selectable
microphone gain output. Because the digital paging console provides a balanced line level output, it can be
positioned up to 1.2KM awa from the zone selector.
3
Fea ures.
•Built-in microchip controller compile all the features into a single device
•A LCD 4 X 20CH with blue back light to displa s stem status, zones settings and grouping function
•Simple ke pad la out make operation simple and user friendl
•Appropriate for a s stem less than 180zones.
• Allowed data communication distance up to 1.2KM.
•Instead of analogue s stem, digital s stem can avoid complicated hardwire configuration b using
single CAT5E cable which carrier balanced audio signal, power and data.
•Built-in 8 t pe of chime with volume gain at the bottom of the console.
•Preset call duration limit from 1 to 10minute to avoid accidentl pressed or overlook after used.
•CALL function either can be set in toggle or momentar mode (Press-To-Talk).
•One touch emergenc button to override the entire paging console during emergenc .
•9nos of grouping can be saved and recalled from the internal memor .
•B pressing the S nchronize button and send all the setting to other EMKP-8001 except priorit level.
•Cardiod condenser microphone with tightl controlled unidirectional polar pattern provides excellent
ambient noise control allowing the wanted speech stand out from the background of nois confusion.
•Adjustable Microphone sensitivit at the rear of the microphone.
•Easil being integrated with EMIX range public address equipment.
4
Top View and Rear View
Figure 1.1 Top view of the digital paging console
Figure 1.2 Rear view of the paging console
5
Figure 1.3: Bottom view of the Digital Paging Microphone
6
Keypad and Rear Panel Indica ion
EMKP-8001 Digi al Paging Microphone
1.1 Keypad Indica or
1
LCD Display
– 4 X 20 Characters LCD to displa s stem status & message eas for reading. Zones setting
and zone grouping are displa ed in multi pages for eas viewing
2
Keypad
– The large 24 labeled matrix buttons make operation simple & user friendl .
3
Page Up
– Navigation ke for page menu and configuration selection. For example, current page is
zone 11 to zone 20, after button pressed will be switched to zone 1 to zone 10. For configuration
selection, the menu will be switched reversel when button pressed.
Used as primaril (next page) as parameter setting button too.
4
Page Down
– Navigation ke for page menu and configuration selection. For example, current page is
zone 1 to zone 10, after button pressed will be switched to zone 11 to zone 20. For configuration
selection, the menu will be switched forwardl when button pressed.
Used primaril (previous page) as parameter setting button too.
5
Emergency
– To activate immediate paging. When button pressed, all zones will be selected
automaticall .
6
Call
– To activate paging after zone selection. Used as primaril (Enter) as parameter setting button
too.
7
Clear All
– To clear all selected zone.
8
Priori y
– To enter priorit setting menu.
9
Selec All
– To select all zones.
10
PTT
– To enter paging mode configuration. 2 configurations are included which is Push to Talk
(momentar ) mode and Toggle mode (Push to on & push to off).
11
Synchronize
– To s nchronize group memor or device setting.
12
Chime
– To enter chime configuration. 7 t pes chime configuration included.
13
Save
– To save zones group. Maximum 10 setting can be saved.
14
Delay
– Dela (Paging countdown timer) is an added feature which able to prevent unwanted paging.
User might not deactivate the device after paging and this causes unwanted paging. B setting Dela ,
the device will automaticall deactivate when the dela period is time out.
15
Load
– To load saved zones group. Maximum 10 setting can be loaded.
7
16
Zone Selec ion
– To select zone within ever page menu. 1 page contain 10zones for example 1
st
page
is zone 1 to zone 10, press
Page Down (3)
will be next 10 zones
e.g.
zone 11 to zone 20.
1.2 Rear Panel indica or
17
Mic sensi ivi y
– To adjust microphone sensitivit .
18
Communica ion Por
– This RJ45 socket accepts the CAT5 straight cable connected to EMZS-8006 6CH
speaker zone selector and EMZS-8012 12CH speaker zone selector. It also can be linked to extension
unit.
1.3 Bo om Panel indica or
19
Chime Volume
– To adjust the chime volume.
8
2.0 Ins alla ion Diagram / Schema ic Diagram
Figure 1.3: There are 4nos of 180zones paging console connected up with 2nos of 12CH Zone selector
EMZS-8012 through RJ45 to line converter. All of the paging consoles have a loop through connection
from the last paging console to zone selector. From the single line shown above, there is total 7nodes
taken up for the s stem.
Notes: Maximum 32nos nodes can be connected up.
3.0 Uni Se up - Zone c
onfigura ion
Press Zone button
to enter zone setting
Figure: Zone setting. B default, number of zone is set to 180 zones.
Press Page Up or Page Down button
Figure: Page Down button pressed
Figure: Page Down button
pressed again
Once total number of zone is confirmed
You are able to view total 3 pages o
f zoning from zone 1 to zone 30 after chosen as the diagram shown above
Notes:
This setting must be done
paging.
onfigura ion
to enter zone setting
menu as below:-
Figure: Zone setting. B default, number of zone is set to 180 zones.
to select total usage number of zone in the s stem
pressed again
Once total number of zone is confirmed
, pressed CALL button (Enter)
f zoning from zone 1 to zone 30 after chosen as the diagram shown above
This setting must be done
to reduce the hassle of
too man pages exists when
Pages &
Page 01 :
Page 02 :
Page 03 :
Page 04 :
Page 05 :
Page 06 :
Page 07 :
Page 08 :
Page 09 :
Page 10 :
Page 11 :
Page 12 :
Page 13 :
Page 14 :
Page 15 :
Page 16 :
Page 17 :
Page 18 :
9
to select total usage number of zone in the s stem
f zoning from zone 1 to zone 30 after chosen as the diagram shown above
too man pages exists when
operator making
Pages &
Number of Zone:
Page 01 :
1-10 Zones
Page 02 :
11-20 Zones
Page 03 :
1-30 Zones
Page 04 :
1-40 Zones
Page 05 :
1-50 Zones
Page 06 :
1-60 Zones
Page 07 :
1-70 Zones
Page 08 :
1-80 Zones
Page 09 :
1-90 Zones
Page 10 :
1-100 Zones
Page 11 :
1-110 Zones
Page 12 :
1-120 Zones
Page 13 :
1-130 Zones
Page 14 :
1-140 Zones
Page 15 :
1-150 Zones
Page 16 :
1-160 Zones
Page 17 :
1-170 Zones
Page 18 :
1-180 Zones
3.1 Unit Setup -
Dela (Paging period timer) configuration
The purpose of setting up the timeout dela to prevent the microphone accidentl turned on and left
unoccupied after an announcement has been made.
Press
Delay
button
to enter dela period setting:
Press
Up
or
Down
button to select our timeout dela
Notes: If no entr is made within 10seconds,
front page.
Once confirm the Timeout dela setting
Dela (Paging period timer) configuration
The purpose of setting up the timeout dela to prevent the microphone accidentl turned on and left
unoccupied after an announcement has been made.
to enter dela period setting:
button to select our timeout dela
Notes: If no entr is made within 10seconds,
the setup menu shall exit automaticall and return to the
Once confirm the Timeout dela setting
press
CALL
button it will result as below:
-
10
The purpose of setting up the timeout dela to prevent the microphone accidentl turned on and left
the setup menu shall exit automaticall and return to the
-
Tabla de contenidos
