Emerson Rosemount 975 Series Manual de usuario
Quick Start Guide
00825-0200-4975, Rev AD
August2023
Rosemount™ 975 Series
Flame Detectors
Safety instructions
WARNING
Physical access
Unauthorized personnel may potentially cause significant damage to and/or
misconfiguration of end users’ equipment. This could be intentional or unintentional and
needs to be protected against.
Physical security is an important part of any security program and fundamental in protecting
your system. Restrict physical access by unauthorized personnel to protect end users’ assets.
This is true for all systems used within the facility.
Contents
Models........................................................................................................................................... 3
Installing the detector................................................................................................................. 6
Special conditions for use......................................................................................................... 20
Declaration of Conformity........................................................................................................ 22
Reference data........................................................................................................................... 24
Quick Start Guide August2023
2 Emerson.com/Rosemount
1 Models
The Rosemount 975 Flame Detectors are electro-optical devices
designed to identify fire events, enabling alarm activation. The
detectors are intended for indoor or outdoor use and can be used
stand alone or connected to an alarm or automatic extinguishing
system.
The Rosemount 975 series comprises the following detectors:
Rosemount 975MR
The Rosemount 975MR Ultra Fast Multi-spectrum Triple Infrared
(IR3) Flame Detector provides superior, longest distance detection
of hydrocarbon fires at up to 300 ft (90 m), exceptional ultra-
fast detection in under 50 msec, and unparalleled reliability. The
Rosemount 975MR is based on proven IR3 technology, ensuring
highest sensitivity with best immunity to false alarms.
Rosemount 975HR
The Rosemount 975HR Multi-Spectrum IR Flame Detector provides
superior, longest distance detection of hydrogen (at up to 165 ft
[50 m]) and hydrocarbon (at up to 300 ft [90 m]) fires, exceptional
ultra-fast detection in under 50 msec, and unparalleled reliability. The
Rosemount 975HR is designed to deal with the challenges of invisible
fires based on proven triple IR (IR3) technology, ensuring highest
sensitivity with best immunity to false alarms.
Rosemount 975UF
The Rosemount 975UF Ultra Fast UV/IR Flame Detector can detect
fire in under 20 msec and features a unique dual sensor with
selectable UV and IR channels that can be used separately or
combined. The detector is designed to detect a range of fires, such
as hydrocarbon-based fuel and gas, hydroxyl, hydrogen, metal, and
inorganic.
Rosemount 975UR
The Rosemount 975UR Ultra Fast UV/IR Flame Detector can detect
fire in under 20 msec and features a unique dual sensor with
selectable UV and IR channels that can be used separately or
combined. The detector is designed to detect hydrocarbon-based fuel
and gas fires.
Table 1-1: Rosemount 975 Series general technical specifications
Spectral response Infrared and ultraviolet bands
August2023 Quick Start Guide
Quick Start Guide 3
Table 1-1: Rosemount 975 Series general technical specifications
(continued)
Response time Varies according to model, typically under
5 seconds
Field of view Varies according to model, up to 100
degrees
Output 4-20 mA, relays, communication
Enclosure Stainless steel 316 or aluminum
polyurethane painted
Operating voltage 18-32 VDC
Maximum power rating 9.6 W
Relay contacts 2A/30 VDC
Over voltage category 2
Relative humidity Non-condensing relative humidity up to
100%
Table 1-2: Typical current consumption
Typical current
consumption
975MR 975HR 975UF 975UR
Normal power
consumption without
heater- mA (Watts)
60 (1.4) 90 (2.2)
Normal power
consumption without
heater with alarm - mA
(Watts)
90 (2.2) 120 (2.9)
Low power heater with
alarm - mA (Watts)
140 (3.4) 180 (4.3)
Standard power mode
heater with alarm - mA
(Watts)
280 (6.7) 320 (7.7)
Quick Start Guide August2023
4 Emerson.com/Rosemount
NOTICE
•If the product is used outside of specified limits, this voids the
product certification, and our company is not responsible for any
incurred warranty expense.
•Do not open this product, except for the terminal compartment as
listed in this document, under any circumstances.
•The detector is not field-repairable. Do not attempt to modify or
repair the internal circuits or change their settings, as this will
impair the system's performance and void the product warranty.
•Opening the attachment screws to dismantle the front part of the
detector from remaining parts is restricted and voids the product
warranty.
August2023 Quick Start Guide
Quick Start Guide 5
2 Installing the detector
Table 2-1: Required tools
Tool Function
Hex key 1.5 mm Fasten back cover security screw.
Hex key 6 mm Adjust the tilt mount.
Hex key 10 mm Affix the detector to the tilt mount.
Hex key ⅛-in Attach protective cover to detector.
Flat screwdriver 6 mm Connect ground terminal.
Flat screwdriver 2.5 mm Connect wires to the terminal blocks.
Hex key ⅜-in Stop plug ¾-in. NPT.
Open wrench 28 mm Stop plug M25 only.
NOTICE
These are standard tools and are not supplied with the detector.
2.1 Mounting accessories
2.1.1 Tilt mount
The tilt mount (PN 00975-9000-0022) enables the detector to be
mounted on flat wall surfaces.
Related information
Attach detector to tilt mount
2.1.2 Duct mount
The duct mount (PN 00975-9000-0002) is suitable for use with the
Rosemount 975 series optical flame detector for both the aluminum
and stainless steel enclosures.
The duct mount allows flame detection in areas where high
temperatures exist or in cases where the detector cannot be installed
inside the area. It comprises a special duct mount arrangement with
specific optical window to allow installation in high temperature duct
applications.
The duct mount limits the cone of vision of the installed detector to
70 degrees horizontal and vertical.
Quick Start Guide August2023
6 Emerson.com/Rosemount
2.1.3 Pole mount
Use the pole mount to mount the detector on poles with the
following diameters:
Table 2-2: Pole mount options
Pole diameter Part number
2 in. (50.8 mm) 00975-9000-0007
3 in. (76.2 mm) 00975-9000-0008
For more information, refer to the Pole Mount Quick Start Guide.
2.2 Attach detector to tilt mount
Figure 2-2: Tilt mount
A. Tilt holding plate
B. Horizontal locking screw
C. Tilt mount
D. Vertical locking screw
E. Detector holding plate
Quick Start Guide August2023
8 Emerson.com/Rosemount
Figure 2-3: Tilt mount with dimensions
Procedure
1. Unpack the detector.
2. The device is provided with two plastic plugs (See image
below). The stainless-steel stop plug used to seal the unused
conduit will be included in the device.
Remember, seal the detector with the stainless-steel plug
before use. Refrain from losing the plug in any case
A. Detector with two plastic plugs
B. Product packaging with stainless-steel plug attachment
August2023 Quick Start Guide
Quick Start Guide 9
3. Insert location pins on the tilt mount into the openings on
detector housing.
4. Thread the holding screw and tighten it.
Note
To change the detector field of view, release the horizontal
and vertical locking screws.
5. Point the detector toward the protected area and ensure the
view of the area is unobstructed.
6. Secure the detector in that position by tightening the locking
screws on the tilt mount.
The detector is now correctly located, aligned, and ready to be
connected to the system.
Quick Start Guide August2023
10 Emerson.com/Rosemount
Otros manuales para Rosemount 975 Series
3
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Sensor de seguridad de Emerson
Emerson
Emerson Rosemount 389 Manual de usuario
Emerson
Emerson Rosemount 2160 Manual de usuario
Emerson
Emerson CT2211 Manual de usuario
Emerson
Emerson Rosemount 396P Manual de usuario
Emerson
Emerson Rosemount 226 Manual de usuario
Emerson
Emerson Dixell GDS41 Diagrama de cableado
Emerson
Emerson Rosemount 2140 Manual de usuario
Emerson
Emerson Net Safety JB Series Manual de usuario
Emerson
Emerson Rosemount 2160 Manual de usuario
Emerson
Emerson Rosemount 975 Manual de usuario
Emerson
Emerson Rosemount CT4215 Manual de usuario
Emerson
Emerson REED Series Manual de usuario
Emerson
Emerson Rosemount 975 Series Manual de usuario
Emerson
Emerson GDU-Incus Manual de usuario
Emerson
Emerson Rosemount 2140 Manual de usuario
Emerson
Emerson GW-810-3760 Manual de usuario
Emerson
Emerson White-Rodgers 902 Manual de usuario
Emerson
Emerson CHD200G Manual de usuario
Emerson
Emerson Rosemount 975 Series Manual de usuario
Emerson
Emerson Rosemount 2160 Manual de usuario
