Emerson RTM-ATCA-736x-DD Manual de usuario

RTM-ATCA-736x-DD

Quick Start Guide

P/N:6806800P33A (May 2012)

Observe ESD-safe

measures

What’s in the box?

When installing or servicing the

module or accessories, strictly

observe the safety precautions

in the Safety Notes. Otherwise,

personal injury or property dam-

age may occur. Ignoring these

instructions can void the board

warranty.

Electrostatic discharge and

incorrect RTM installation and

removal can damage circuits or

shorten their life.

• Use either a properly grounded ESD

wrist strap or make sure that you are

working in an ESD-safe environ-

ment.

• Connect to the ESD connector at the

front or the rear of the system.

Make sure you receive all items of

your shipment:

• RTM-ATCA-736x-DD blade

• Other items that were ordered

• Printed Safety Notes Prepare the installation

site

• For information on the environmen-

tal and power requirements, see the

RTM-ATCA-736x-DD Installation and

Use manual.

• Operating temperatures refer to the

temperature of the air circulating

around the blade and not to the

actual component temperature.

RTM-ATCA-736x-DD Quick Start Guide

Emerson Network Power – Embedded Computing

2900 South Diablo Way, Suite 190

Tempe, AZ 85282-3222

USA

Emerson Network Power – Embedded Computing

Lilienthalstr. 15

D-85579 Neubiberg/München

Germany

Emerson Trading (Shanghai) Ltd.

15/F Gateway Building No.

10 Ya Bao Road, Chao Yang Dist.

Beijing 100020

China

Emerson Network Power – Embedded Computing

Shiba Excellent Building 5F

2-1-13 Hamamatsucho, Minato-ku

Tokyo 1 05-0013

Japan

Install the hard disk module

1. Remove the HDD slot cover of the RTM

by loosening and removing the screws

that attach the plate to the RTM.

2. Place the hard disk insulator on the top

of the SAS-PCB assembly . (Find #1 & 8)

3. Align the insulator holes with the holes

on the board.

4. Place the hard disk on the top of the

insulator, such that it is aligned with the

board SATA connector. (Find #9)

5. Slide the hard disk into the SATA connec-

tor.

6. Flip assembly on its back and align the

SAS-PCB holes with the insulator and

hard disk holes.

7. Attach the drive support bracket to the

side of the hard disk. (Find #4)

8. Install the four flat head screws to secure

the drive support bracket to the hard

disk. (Find #5)

9. Install the two pan head screws to fix the

hard disk, insulator, and SAS-PCB

together. (Find #6)

10.Assemble the front panel bezel to the

disk drive assembly using two flat head

screws. (Find #3)

11.Take all necessary steps in your operat-

ing system to make the hard disk opera-

ble (the steps depend on the OS you are

using).

8 4306883A01 A SPACER, HDD MODULE 1 -

6 0306868A01 SCREW, M3x0.5x5, PH 2 -

5 03SL992G30A SCREW, M3x0.5x5, FH 6 -

4 0706823C01 B BRACKET, DRIVE SUPPORT, SAS, HDD-FRU 1 -

3 1306804A01 D BEZEL, MACHINED, SAS, HDD-FRU 1 -

2 88068XXX* HDD 1 -

1 8406880J0** SAS-PCB 1 -

ITEM PART NUMBER DESCRIPTION QTY SUPPLIER

RTM-ATCA-736x-DD Quick Start Guide

Emerson Network Power – Embedded Computing

2900 South Diablo Way, Suite 190

Tempe, AZ 85282-3222

USA

Emerson Network Power – Embedded Computing

Lilienthalstr. 15

D-85579 Neubiberg/München

Germany

Emerson Trading (Shanghai) Ltd.

15/F Gateway Building No.

10 Ya Bao Road, Chao Yang Dist.

Beijing 100020

China

Emerson Network Power – Embedded Computing

Shiba Excellent Building 5F

2-1-13 Hamamatsucho, Minato-ku

Tokyo 1 05-0013

Japan

Install the RTM

1. Locate the slot the RTM is to be

installed into the shelf's rear which

must be the same as that of the front

blade.

2. Ensure that the top and the bottom

handles of the RTM are in an out-

ward position by squeezing the lever

and the latch together.

3. Insert the RTM into the shelf by plac-

ing the top and bottom edges in the

card guides of the slot.

4. Slide the RTM into the slot.

5. Apply equal and steady pressure to

the RTM to carefully slide the RTM

into the shelf until you feel resis-

tance. Continue to gently push the

RTM until the RTM connectors

engage.

Install the RTM (Cont.)5

6. Squeeze the lever and the latch

together and hook the lower and the

upper handle into the shelf rail

recesses.

7. Fully insert the RTM and lock it to the

shelf by pressing the two compo-

nents of the lower and the upper

handles together and turning the

handles toward the face plate.

8. Tighten both face plate screws on

the RTM.

9. Wait until the blue LED on the RTM is

OFF.

A switched off blue LED indicates

that the payload of the RTM has

become active.

10.Plug interface cable into face plate

connectors, if applicable.

11.Reboot the front blade.

This is necessary so that the OS of

the front blade can recognize the

SAS controller or any other PCI

device located on the RTM.

Finding more information

For more information on the product, see

the RTM-ATCA-736x-DD Installation and Use

and other related documentation.

Visit our Web site http://www.emersonnet-

workpower.com/embeddedcomputing.

Use the Product Search link to look for tech-

nical documentation.

Technical Assistance

To request technical assistance, visit our

Web site http://crcportal.emerson.com.

Otros manuales de Instrumento de medición de Emerson

Emerson

Emerson Micro Motion HPC010P Manual de usuario

Emerson

Emerson Rosemount CCO 5500 Manual de usuario

Emerson

Emerson Dixell XWEB3000 Manual de usuario

Emerson

Emerson Daniel Ultrasonic 3410 Series Manual de usuario

Emerson

Emerson Rosemount Manual de usuario

Emerson

Emerson Rosemount 6888A Manual de usuario

Emerson

Emerson Daniel 3410 Series Manual de usuario

Emerson

Emerson Rosemount 8750W Manual de usuario

Emerson

Emerson Daniel 3410 Series Manual de usuario

Emerson

Emerson FB1100 Manual de usuario

Emerson

Emerson Daniel 3410 Series Manual de usuario

Emerson

Emerson Rosemount 8782 Manual de usuario

Emerson

Emerson Daniel 3410 Series Manual de usuario

Emerson

Emerson FB1100 Manual de usuario

Emerson

Emerson Rosemount 3818 Manual de programación

Emerson

Emerson Rosemount 8742C Manual de usuario

Emerson

Emerson Rosemount 6888Xi Manual de usuario

Emerson

Emerson Micro Motion SGM Series Guía rápida

Emerson

Emerson Rosemount Oxymitter DR Manual de usuario

Emerson

Emerson AMS Manual de usuario

Emerson

Emerson Daniel 3410 Series Manual de usuario

Emerson

Emerson Rosemount 6888C Manual de usuario

Emerson

Emerson FloBoss 103 Manual de usuario

Emerson

Emerson Rosemount 2230 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario