Emerson RXi2 Manual de usuario

Quick Start Guide

GFK-3196E

May 2023

RXi2 –BP Industrial PC

QUICK START GUIDE

i RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

Caution Notes as Used in this Publication

WARNING

Warning notices are used in this publication to emphasize that

hazardous voltages, currents, temperatures, or other conditions that

could cause personal injury exist in this equipment or may be

associated with its use.

In situations where inattention could cause either personal injury or

damage to equipment, a Warning notice is used.

CAUTION

Caution notices are used where equipment might be damaged if

care is not taken.

Note: Notes merely call attention to information that is

especially significant to understanding and operating the

equipment.

ii RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

These instructions do not purport to cover all details or

variations in equipment, nor to provide for every possible

contingency to be met during installation, operation, and

maintenance. The information is supplied for informational

purposes only, and Emerson makes no warranty as to the

accuracy of the information included herein. Changes,

modifications, and/or improvements to equipment and

specifications are made periodically and these changes may or

may not be reflected herein. It is understood that Emerson may

make changes, modifications, or improvements to the

equipment referenced herein or to the document itself at any

time. This document is intended for trained personnel familiar

with the Emerson products referenced herein.

Emerson may have patents or pending patent applications

covering the subject matter in this document. The furnishing of

this document does not provide any license whatsoever to any of

these patents.

Emerson provides the following document and the information

included therein as-is and without warranty of any kind,

expressed or implied, including but not limited to any implied

statutory warranty of merchantability or fitness for a particular

purpose.

 
iii RXi2 - BP Industrial PC Quick Start Guide GFK-3196E 
Contents 
Physical Connection Overview and Startup.............1 
Status LEDs .........................................................................................1 
Power Input ........................................................................................2 
Ethernet Ports.....................................................................................3 
DisplayPort..........................................................................................4 
USB Ports.............................................................................................4 
Initial Startup......................................................................................5 
RXi2-BP Pre-Installed Software Options...................6 
Windows 10 Startup.....................................................7 
Movicon.NExT Startup.................................................7 
Movicon.NExT Demo Mode..............................................................9 
Checking Activated Licenses ............................................................9 
Movicon.NExT License File Recovery in Windows 10..................10 
PACEdge Startup ........................................................10 
PACEdge Usage Model....................................................................10 
Initial Login.................................................................14 
Mounting Information ..............................................18 
General Contact Information...................................19 
 

1 RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

Physical Connection Overview

and Startup

Status LEDs

The RXi2-BP provides a set of different status-LEDs on the front

panel to indicate various functions.

LED Name

Color

LED status indication

Power

(also a

button)

Green

All power rails available are good and unit is powered

up (S0).

Yellow

Unit is in standby mode (S3/S4/S5).

Red

Error condition, contact Emerson support for help.

SATA

Green

Disc SATA access in progress (M.2).

USER

Green

Reserved for future use.

TEMP

Green

Temperatures below Thot and Tcrit.

Yellow

Temperatures above Thot and below Tcrit.

If supported by OS, a safe shutdown is initiated.

Red

Temperatures above Thot and Tcrit.

An immediate shutdown has occurred to protect the

system.

TPM

(also a

button)

Yellow

If physical presence is activated, this LED shows the

current status of the physical presence state.

2 RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

Power Input

The RXi2-BP can be powered with a DC power supply capable of

24 V (±25%) and delivering at least 1.8 A.

The corresponding plug is a Phoenix Contact, part number

1748367. The user must use the same connector type or

equivalent.

Figure 1: Power Connector

Signal Name

Pin (left to right)

Power + (24V DC)

Power - (24V DC)

FGND

3 RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

Ethernet Ports

The RXi2-BP provides four Ethernet ports, three RJ45 on the front

panel, and one at the bottom of the IPC.

All four Ethernet ports support 10/100/1000 Base-T.

ETH 0 port also supports AMD remote management DASH

functionality. For details about DASH functionality consult GFK-

3817, RXi2-BP Hardware Reference Manual.

For a proper 100/1000 Mbps connection, Emerson recommends

a CAT5 cable or better.

Figure 2: Ethernet Ports

4 RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

DisplayPort

The RXi2-BP provides one DisplayPort (DP) output that can be

used to directly connect monitors with a DP input. It can also use

a standard off-the-shelf adapter to convert DP signals to HDMI

or VGA.

Figure 3: DisplayPort

USB Ports

The RXi2-BP provides four USB ports. USB1 and USB2 support

both USB 3.1 and USB 2.0 specifications, while USB3 and USB4

support only USB 2.0 specifications.

Figure 4: USB Ports

5 RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

Initial Startup

For the first startup, it is advisable to connect a monitor,

keyboard, and mouse so that boot progress can be observed.

For headless operation after the first start up, a directly attached

monitor is not required.

After making the power connections, the IPC will power on

automatically. A few seconds after powering up, the RXi2-BP IPC

system UEFI Firmware banner and Emerson logo will display on

the screen. If the user does not see any error messages up to

this point, the RXi2-BP IPC is running properly and ready to be

configured for an application.

For more information on remote management DASH

functionality and UEFI Setup, see GFK-3187, RXi2-BP Hardware

Reference Manual.

If the RXi2-BP came with pre-installed software, the boot process

will continue to load the operating system and application

software.

Note: If the RXi2-BP IPC does not perform as described above, some

damage may have occurred during shipment or the IPC is not

configured properly. Please contact Emerson for technical support.

(contact information is provided at the end of this document.)

6 RXi2 - BP Industrial PC Quick Start Guide GFK-3196E

RXi2-BP Pre-Installed Software

Options

Software Options

Descriptions

RXI2-BP (No Pre-

Installed Operating

System or Software)

The user is responsible for installing an operating

system and application software. Connect the power

cable, monitor, USB keyboard, and mouse before

powering-up the system. Consult GK-3187, RXi2-BP

Hardware Reference User Manual for details on how to

change the UEFI boot order and to install the operating

system.

RXi2-BP Windows 10

The unit comes with a Windows 10 IoT operating

system pre-installed. Connect the power cable,

monitor, USB keyboard, and mouse before powering-

up the system. Follow the on-screen instructions for

configuring Windows OS. Consult the Windows 10

Startup section for more details.

RXi2-BP

Movicon.NExT

The unit comes with Movicon.NExT software pre-

installed. Connect the power cable, monitor, USB

keyboard, and mouse before powering-up the system.

Consult the Movicon.NExT Startup section for details.

RXi2-BP PACEdge

The unit comes with PACEdge software pre-installed.

Consult the PACEdge Startup section for details.

Otros manuales para RXi2

Tabla de contenidos

Otros manuales de PC industrial de Emerson

Emerson

Emerson RXi2-BP Manual de usuario

Emerson

Emerson FB1100 Manual de lista de piezas

Emerson

Emerson Micro Motion 3711 Guía rápida

Emerson

Emerson RXi2 Manual de usuario

Emerson

Emerson RXi2-EP Guía rápida de usuario

Emerson

Emerson RXi2 - LP Guía rápida de usuario

Emerson

Emerson RXi2-BP Guía rápida de usuario

Emerson

Emerson RXi2-EP Guía rápida de usuario

Emerson

Emerson RXi2-UP Manual de usuario

Emerson

Emerson RXi2-XP Guía rápida de usuario

Emerson

Emerson RXi2-BP Manual de usuario

Emerson

Emerson RXi2 Manual de usuario

Emerson

Emerson RXi2-UP Guía rápida de usuario

Emerson

Emerson RTM-ATCA-F140 Guía de inicio rápido

Manuales populares de PC industrial de otras marcas

Chipsee

Chipsee PPC-A72-101 Manual de usuario

Advantech

Advantech UNO-2184G Manual de usuario

MSI

MSI MS-9A76 Manual de usuario

Stackrack

Stackrack THOR200 Manual de usuario

Moxa Technologies

Moxa Technologies DA-682C Series Manual de usuario

Nodka

Nodka eBOX-3000-ETC Manual de usuario

Siemens

Siemens SIMATIC IPC627E Manual de usuario

MSI

MSI MS-9A89 Manual de usuario

Artila

Artila Matrix-516 Manual de usuario

Siemens

Siemens SIMATIC Rack PC 840 V2 Manual de usuario

Advantech

Advantech IPPC-6152A Manual de usuario

Beckhoff

Beckhoff CX9020 Manual de usuario

Dell

Dell Embedded Box PC 5000 Manual de usuario

IBASE Technology

IBASE Technology ASB200-918 Series Manual de usuario

Lenovo

Lenovo ThinkCentre M90q Manual del propietario

IXXAT

IXXAT Econ 100 Manual de usuario

Kontron

Kontron KBox A-151-TGL Manual de usuario

AXIOMTEK

AXIOMTEK ICO500-518 Series Manual de usuario