Emerson RXi2 Manual de usuario

Quick Start Guide

GFK-3074F

Aug 2021

RXi2 –LP Industrial PC

QUICK START GUIDE

i RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

Caution Notes as Used in this Publication

WARNING

Warning notices are used in this publication to emphasize that

hazardous voltages, currents, temperatures, or other conditions

that could cause personal injury exist in this equipment or may be

associated with its use.

In situations where inattention could cause either personal injury

or damage to equipment, a Warning notice is used.

CAUTION

Caution notices are used where equipment might be damaged if

care is not taken.

Note: Notes merely call attention to information that is especially

significant to understanding and operating the equipment.

ii RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

These instructions do not purport to cover all details or variations in

equipment, nor to provide for every possible contingency to be met

during installation, operation, and maintenance. The information is

supplied for informational purposes only, and Emerson makes no

warranty as to the accuracy of the information included herein.

Changes, modifications, and/or improvements to equipment and

specifications are made periodically and these changes may or may not

be reflected herein. It is understood that Emerson may make changes,

modifications, or improvements to the equipment referenced herein or

to the document itself at any time. This document is intended for

trained personnel familiar with the Emerson products referenced

herein.

Emerson may have patents or pending patent applications covering the

subject matter in this document. The furnishing of this document does

not provide any license whatsoever to any of these patents.

Emerson provides the following document and the information

included therein as-is and without warranty of any kind, expressed or

implied, including but not limited to any implied statutory warranty of

merchantability or fitness for a particular purpose.

 
iii RXi2 - LP Industrial PC Quick Start Guide GFK-3074F 
 
Contents 
Physical Connection Overview and Startup ......1 
Power Input...................................................................................... 2 
Connecting Input Power (24V DC-in) .................................. 3 
DisplayPort....................................................................................... 4 
Ethernet Ports .................................................................................. 4 
USB Ports ........................................................................................ 5 
Serial Ports (UART) ......................................................................... 6 
Audio .................................................................................... 7 
Initial Startup...................................................8 
RXi2-LP Pre-Installed Software Options............9 
Windows 10 Startup.......................................................................10 
Movicon.NExT Startup ...................................................................10 
PACEdge Startup........................................................................... 12 
PACEdge Usage Model .....................................................12 
Initial Login ......................................................................... 15 
Mounting Information ...................................18 
General Contact Information..........................19 
 

1 RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

Physical Connection Overview and

Startup

The rear panel I/O port arrangement consists of the following:

Figure 1: Rear Panel Arrangements

2 RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

Power Input

The RXi2-LP can be powered with a DC power supply of 24 V (+-25%)

and at least delivering 1.8 A.

The corresponding plug is a Phoenix Contact, part number 1748367.

The user must use the same connector type or equivalent.

Figure 2: Power Connector

Signal Name

Pin (left to right)

Power + (24V DC)

Power - (24V DC)

FGND

3 RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

Connecting Input Power (24V DC-in)

To connect to power, follow these steps:

1. Verify that the power cable is not energized.

2. Loosen the screw clamps on the mating power connector.

3. Strip the insulation from the power cables.

4. Secure the power cable to the mating connector, noting

polarity, and tighten the screw clamps. The torque for the

attaching screws is 0.3 Nm (2.26 in-lb).

5. Apply dc power to the unit. During normal startup and

operation, the LED status indicator will be solid green during

normal operation.

6. Once power is applied, the unit will begin initializing.

Note: Be sure to connect a DC power cord to this 3-pin power

connector. Using a voltage out of the range may fail to boot the system

or cause damage to the system board.

4 RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

DisplayPort

The RXi2-LP provides one DisplayPort (DP) output. It can be used to

directly connect monitors with a DP input or to use standard off-the-

shelf adapters to convert DP signals to HDMI or VGA.

Figure 3: DisplayPort

Ethernet Ports

The RXi2-LP provides two 2 Intel® I210IT PCI Express Gigabit Ethernet

controllers (4 on larger box module). The LAN ports allow the system

board to connect to a local area network through a network hub or

router.

For a proper 100/1000 Mbps connection, Emerson recommends a

CAT5 cable or better.

5 RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

Figure 4: Ethernet Ports

LED

LED State

Operating State

Speed

Yellow,

10/100/1000

Link

Activity

Green, ON

Link Status

USB Ports

The RXi2-LP provides four USB ports. USB1 and USB2 support both USB

3.1 and USB 2.0 specifications.

Figure 5: USB Ports

6 RXi2 - LP Industrial PC Quick Start Guide GFK-3074F

Serial Ports (UART)

Serial

Connection

Function

RS232

TXD

RXD

RTS

CTS

GND

RS485

TX+

TX-

RX+

RX-

GND

Otros manuales para RXi2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de PC industrial de Emerson

Emerson

Emerson RXi2-BP Guía rápida de usuario

Emerson

Emerson RXi2 Manual de usuario

Emerson

Emerson RXi2 - LP Guía rápida de usuario

Emerson

Emerson RXi2-EP Guía rápida de usuario

Emerson

Emerson RXi2-BP Manual de usuario

Emerson

Emerson RXi2 Manual de usuario

Emerson

Emerson RXi2-UP Guía rápida de usuario

Emerson

Emerson RXi2-EP Guía rápida de usuario

Emerson

Emerson RXi2-XP Guía rápida de usuario

Emerson

Emerson Micro Motion 3711 Guía rápida

Emerson

Emerson RTM-ATCA-F140 Guía de inicio rápido

Emerson

Emerson RXi2-BP Manual de usuario

Emerson

Emerson RXi2-UP Manual de usuario

Emerson

Emerson FB1100 Manual de lista de piezas

Manuales populares de PC industrial de otras marcas

Chipsee

Chipsee PPC-A72-101 Manual de usuario

Advantech

Advantech UNO-2184G Manual de usuario

MSI

MSI MS-9A76 Manual de usuario

Stackrack

Stackrack THOR200 Manual de usuario

Moxa Technologies

Moxa Technologies DA-682C Series Manual de usuario

Nodka

Nodka eBOX-3000-ETC Manual de usuario

Siemens

Siemens SIMATIC IPC627E Manual de usuario

MSI

MSI MS-9A89 Manual de usuario

Artila

Artila Matrix-516 Manual de usuario

Siemens

Siemens SIMATIC Rack PC 840 V2 Manual de usuario

Advantech

Advantech IPPC-6152A Manual de usuario

Beckhoff

Beckhoff CX9020 Manual de usuario

Dell

Dell Embedded Box PC 5000 Manual de usuario

IBASE Technology

IBASE Technology ASB200-918 Series Manual de usuario

Lenovo

Lenovo ThinkCentre M90q Manual del propietario

IXXAT

IXXAT Econ 100 Manual de usuario

Kontron

Kontron KBox A-151-TGL Manual de usuario

AXIOMTEK

AXIOMTEK ICO500-518 Series Manual de usuario