Emerson Keystone Figure 969 Hopper Manual de usuario

KEYSTONE FIGURE 969 HOPPER KNIFE GATE VALVES

InstallatIon and operatIng manual

Gland packing replacement instructions for F969 hopper valves

PACKING REPLACEMENT

For optimum performance, the packing

material should be replaced whenever the

valve has been disassembled for routine

maintenance. This is a very simple procedure,

which can be done leaving the valve in the

pipeline. Correct packing is essential for

leak-free operation.

Use Emerson’s preformed and pre-cut

Packing Replacement Kits for best results.

Ensurepacking material selected is suitable

forthe service.

REPACKING PROCEDURE

NOTE

Care should be taken to stagger the mitred joints in

each layer of packing to the opposite side of the gland

follower, e.g:

• 1st packing layer joint to the front of the valve.

• 2nd packing layer joint to the rear of the valve.

• 3rd packing layer joint to the front of the valve.

1. Press first layer of gland packing (6) into

gland cavity by hand, then repeat the

process with the gland packing ensuring

the joints of the two layers are on opposing

sides of the cavity.

2. Firmly press the packing (6) around gate

and into gland cavity.

Strip-down procedure:

1. Ensure pipeline is not pressurized and

anyhazardous medium is drained away.

2. Close valve, remove clevis pins/bolts.

3. Use actuator or handwheel to raise spindle

clear of gate.

4. Remove all upstand bolts.

5. Remove actuator sub-assembly

(handwheel,upstand, gearbox and spindle

or cylinder actuator).

NOTE

Heavy valves will require a chain block or crane.

6. Remove gland follower nuts (8) and

washers(7), then remove gland follower (3)

from gate(2).

7. Remove packing (6) from gland cavity.

8. Clean gland cavity.

9. Fit the gland follower over the gate (2).

10. If the gate has excessive irregularities or

abrasion and requires replacement, then

this will necessitate removal of the valve

from the pipeline, to prevent damage to

thevalve seats.

Gate (2)

Packing (6)

Packing join

12, 13

7, 8 14

12, 13

7, 8 14

KEYSTONE FIGURE 969 HOPPER KNIFE GATE VALVES

InstallatIon and operatIng manual

CAUTION

Do NOT over tighten gland packing as it will cause

excessive resistance to gate movement.

NOTE

To minimize risk to personnel, Emerson recommend

the use of purpose built guards and shrouds.

Refer to the Emerson data sheet or consult factory

for details.

REASSEMBLY

1. Replace gland follower (3) onto the gate (2)

and push down until firmly on valve.

2. Coat stud (9) threads with anti-seize

compound. Replace the gland follower

washers (7) and gland follower nuts (8) onto

each stud (9), screw them down equally,

donot over tighten.

3. Refit the upstand (10) and handwheel.

Replace both upstand bolts (12) and upstand

washers.

4. Use actuator (handwheel or pneumatic

actuator) to lower spindle to align clevis

andgate.

5. Fit clevis bolts (14).

6. Assembly is complete, actuate the valve to

check that the gate is seating properly in

theclosed position.

7. When commissioning, gland follower nuts

(8) may require tightening for final gland

packing adjustment.

Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product.

Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Keystone is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions, Emerson

and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.

The contents of this publication arepresented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be

construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by

our terms and conditions, which are available uponrequest. We reserve the right to modify or improve the designs or specifications of such products at any time without

notice.

Emerson.com/FinalControl

Otros manuales de Unidad de control de Emerson

Emerson

Emerson BM6X Series Manual de usuario

Emerson

Emerson Fisher OS2 Manual de usuario

Emerson

Emerson Unidrive M700 Manual de usuario

Emerson

Emerson ANDERSON GREENWOOD 5910C Manual de usuario

Emerson

Emerson Daniel 788DVC Manual de usuario

Emerson

Emerson Anderson Greenwood 95 Series Manual de usuario

Emerson

Emerson ASCO 353 Series Manual de usuario

Emerson

Emerson Fisher OSE Manual de usuario

Emerson

Emerson Rosemount 68 Series Manual de usuario

Emerson

Emerson Liebert Challenger 3000 Manual de usuario

Emerson

Emerson HANCOCK Manual

Emerson

Emerson SM-EZMotion Module P/N 400361-00 Manual de usuario

Emerson

Emerson Fisher N100 Series Manual de usuario

Emerson

Emerson KTM Hindle 300 Series Manual de usuario

Emerson

Emerson Tartarini BM5 Series Manual de usuario

Emerson

Emerson RSTi-OM Manual de usuario

Emerson

Emerson AVENTICS TV04-CV Manual de usuario

Emerson

Emerson Fisher 6010 Manual de usuario

Emerson

Emerson Coils ASC3 Series Manual de usuario

Emerson

Emerson 91 Manual de usuario

Emerson

Emerson SAPAG CLASAR Series Manual de lista de piezas

Emerson

Emerson VA001-102-01 Guía

Emerson

Emerson Vanessa 30000 Series Manual de usuario

Emerson

Emerson KEYSTONE FIGURE 955 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario