Enjoy Your
Freedom
This Quick Start Guide will help you
set up and activate Emergency
Response USA Mobile Alert System.
Please read this entire guide before
using your system to ensure it is
set up correctly and ready for use.
What’s in
the box
Step 2
1. Hold the S.O.S. button for 3 seconds.
2. Your response team will answer
shortly to customize the unit and
complete set up.
3. When the call ends, the unit will be
set up and ready for use.
Unit Charging
Base
Power
Cord Lanyard
Charge Unit Call to Set up
855.237.2500
www.emergencyresponseusa.com
IMPORTANT:
The unit is not ready for use until you have:
• Charged it in the Charger for 8 hours
• Done Initial GPS activation
• Completed a call with the response team
CAUTION: Neither the unit, nor the
charger, is water proof and should not
be worn while bathing or swimming.
Step 1
1. Insert the Power Cord into the
Charging Base and Plug the large end
of the Power Cord into a standard
wall outlet.
2. Lay the unit at onto the charging
base. Initial Use: Let charge for 8 hours
3. Aer the unit is charged, take it
outside to a location with clear
visibility to the sky for 15 minutes to
allow for GPS Location to be acquired.
This step must only be done once.
1 FREE MONTH
OF SERVICE
When you recommend a friend
who subscribes to our service
