Emco Tech Delphi IO400U Manual de usuario
CONGRATULATIONS ON YOUR NEW PURCHASE!
1 2
You have just purchased the finest, most advanced water system in the world!
Your new Delphi undersink ionizer is designed to provide you with many years of the cleanest,
healthiest and most "functional" water available.
Your new Delphi undersink is the only fully remote faucet that allows you to get both alkaline and
acidic water at the sink. There are many specific uses and benefits of this amazing water, so read
this manual carefully to learn how to get both optimum performance out of your ionizer and to protect
your investment.
Your new Delphi undersink produces filtered alkaline, ionized water.
Just exactly what is that? The Delphi undersink employs computer accurate and selectable magnetic
energy to perform electrolysis through patented platinum bonded titanium electrodes inside a water cell.
Inside this advanced cell, the magnetic energy separates the water into an alkaline (high pH) and
acid (low pH) stream without using any chemicals. Ionizing the water in this way re-structures the
molecules and reduces their cluster size, binds extra oxygen molecules, and concentrates ionized,
absorbable and beneficial minerals like Calcium, Magnesium and Potassium.
Your new Delphi undersink also produces Acidic water.
This type of water has a low pH (less than pH6) and has many excellent uses.
You will now have the convenience and benefits of water that "functions" in many ways that ordinary tap,
filtered or bottled water cannot.
What is alkaline electrolyzed-reduced water?
Why the Delphi is the world's most advanced ionizer
Congratulations / Introduction
Power Related
Installation Precautions
During Usage
pH Reagent Liquid Precautions
Some helpful tips
Description
Safety Precautions
TABLE OF CONTENTS
03-04
05-06
07
08
09
10
10
01-02
Names and functions of Parts I
Names and functions of Parts II
How to Install
How to Use
How to Measure pH
How to set your individual pH levels
How to Add Calcium
Regularly check and clean your Pre-Filter
How to Replace the Filter
About your revolutionary Biostone Filter
Installation, Use and Maintenance
Customer Service
Trouble shooting guide
Specifications
11-12
13-14
15-17
18-21
22
23-24
25
26
27-28
29-30
31-32
33-34
3 4
Safety Precautions
Warning
Caution
Property damage, serious injury or death may result if these instructions and precautions
are not observed.
Physical injuries or material damage may be caused if the instructions are not observed.
Do's and Dont's
DO NOT
DO
Do not disassemble it. Disconnect the power cord from
the wall outlet while using.
Do not touch it. Ground product for protection from
electric shock.
After the adjustment period you can drink the water at this next level.
This level is also great for cooking rice and other grains
- fluffier and great tasting!
Alkaline/acidic electrolyzed-reduced water is "functional water".
This water is first filtered then transformed through electrolysis to be higher in pH, hydrate more
effectively, be highly oxygenated and act as a strong antioxidant.
Some people like this for drinking though it can start to taste strong
It is superb for making tea or coffee as it enhances the taste and reduces
bitterness!
Generally most people find this very strong tasting and with powerful
detoxifying effects.
Great for boiling vegetables! Alkaline water will eliminate the bitter taste
and brings out more of their natural color.
What is alkaline electrolyzed-reduced water?
Some uses for the different levels of Alkaline water
The Acid water has both antiseptic and antibacterial properties.
It also has an astringent effect and can be used for cosmetic purposes.
For initial consumption period
(4-7 days). Let your body adjust slowly to the increase in pH.
Many people find that this lower level is actually perfect for them.
What would I use the Filtered water for?
The pH of Purified water is neither raised nor lowered and would be the
same as your tap water.
This water is simply cleaned of impurities by the advanced filtration system.
You can use it both as drinking water and to take medications with.
Some uses for the different levels of Acidic water
Precautions for use of Alkaline water - don't develop a "drinking" problem!
Use it while brushing your teeth,
gargle with it and use it as a
natural mouth wash!
It is an excellent astringent;
use it for washing your face or
as a natural after shave.
In the kitchen use it to help
clean kitchen utensils.
This setting has sterilizing
properties - use it to sterilize
cutting boards,
dish towels etc…
If you have never consumed alkaline water - do not use a setting higher than 1 to begin with.
Let your body adjust slowly and naturally for 4-7 days. After this initial adjustment period, you
can gradually increase the alkalinity of the water.
Do not take medications with alkaline water. Take medications only with purified water.
Consult with a physician before drinking alkaline water if you have:
- Chronic disease
- A dysfunctional liver or intestines
- Are currently under medical treatment
Do not drink alkaline water if you have achlorhydria.
Consult a physician before using acidic water if you have:
- Sensitive skin
- Allergies
Only use potable drinking water in your ionizer.
Poor water quality may have negative effects on your health and your ionizer! Most municipal
water sources will be fine in your ionizer.
Well water and water from smaller systems should be checked, and may require pre-filtering.
Your ionizer is not under warranty for any damage or required cleaning caused by hard water
deposits.
Please read these pages carefully. They contain very important information to keep YOU and your new ionizer safe!
You remove the filter cover and the spring-loaded filter housing makes it a
snap to replace your filter. MAKE SURE NOT TO THROW AWAY THE FILTER
MAKE SURE NOT TO THROW AWAY THE FILTER
CUP AT BOTTOM OF FILTER!!!
CUP AT BOTTOM OF FILTER!!!
Enhanced convenience in filter replacement
MICOM control system optimizes the pH and ORP of your water and helps
keeps your ionizer in top working condition.
A new indicator light alerts you if service is needed on your ionizer.
MICOM control system
Unlike the ionizers with a manually controlled water supply, where users must
constantly check the flow rate, your ionizer has patented SOL valves which
automatically control the flow rate. This ensures you ease of use and optimal
operation - no guess work involved!
One-touch ON/OFF water supply
5 6
Unique diaphragms made of natural pulp coated with PE and processed with
surfactants keep pH, ORP and ion exchanges between acid and alkaline
uniform despite changes in pressure, flow amount or velocity.
They prevent scale buildup by employing a new material called fremion.
Triple diaphragms
We use the most advanced platinum-titanium electrode plating process that
consistently produces water with optimum ORP (Oxidation Reduction Potential)
at the selected pH level.
5-layered platinum-titanium electrodes
Fully automated flux control through an advanced new patented valve system
greatly enhances the optimization of pH and ORP in your water.
Flux control
Easy to understand symbols and colors identify the type and level of water you have
selected on the machine.
Your ionizer has an attractive colored FND display that easily identifies your
selections.
The easy to read digital indicator gives you an approximate indication of remaining
water filter life. Optimum performance is ensured by always changing your filter on
time. In addition to the digital counter, a new indicator light will flicker when your
current filter life is up, reminding you to change your filter.
Digital Filter Life Indicator
With the SOL valve system, your ionizer produces top quality alkaline water
without the separate cleaning cycle of every other ionizer.
The SOL valve system keeps desirable flow levels and pressure which prevents
scale build up and protects from overloading the electrolysis cell.
This feature also reduces the amount of flow from the Acidic drain line.
A revolutionary new automatic dynamic flow system employing
patented SOL valves.
Premium filter materials ensure production of healthier and cleaner water, trapping
a wide variety of contaminants while allowing beneficial minerals to pass through.
Top quality 9 step single-body nano-silver multi-stage filter
9
Wide choice range of pH. Enhanced convenience with One-Touch operation
9 settings for pH
A voice alerts you to your selection of alkaline, acidic or purified water.
You can adjust the volume level or simply switch the sound ON/OFF as
you desire.
Voice Indicator
When a cross section of an electrode is examined at 700 times magnification,
you can see that the electrodes have very sharp points and form valleys.
Your ionizer employs special electrodes that generate reduced water with
optimal ORP and stable pH level.
Mountain range-like specialized electrodes
ORP
Why the Delphi undersink is the world's
most advanced ionizer Water selection and mode indicators
Your new Delphi undersink is the only fully remote fucet that
allows you to get both alkaline and acidic water at the sink.
7 8
Electrical power precautions
Do not attempt to repair the machine if you encounter a technical problem, first contact the
IonWays Associate you purchased the machine from, then IonWays Technical Support if needed.
Safety Precautions
If your ionizer becomes submerged in water, unplug the power
cord from the wall BEFORE removing the ionizer from the water.
Failure to do so may cause electric shock!
NEVER
NEVER
attempt to repair or service the unit yourself.
Contact your dealer.
Attempting to do so will void your valuable warranty!
Attempting to do so will void your valuable warranty!
Do not use your ionizer at voltages other than specified (AC 110V FOR USA).
Use a GFI outlet. Do not plug in your ionizer where it will exceed the rating of
outlet or electric wiring.
Failure to do so can result in fire, injury and/or damage to yourself,
wiring or your ionizer!
NEVER touch the power cord or plug with wet hands
- this may result in electric shock!
Ensure the power plug is firmly and properly inserted into the outlet
- failure to do so may result in electric shock or fire!
Installation Precautions
Protect your ionizer from freezing temperatures.
Protect your ionizer from direct sunlight.
Do not put anything heavy on top of your ionizer.
Do not install your ionizer on an unstable or soft surface.
Install only on a hard and level surface.
Maintenance Precautions
Common Sense Precautions
Always unplug your ionizer when changing the fuse or cleaning your ionizer
- failure to do so may result in electric shock.
Do not attempt to repair or service the unit yourself. Contact your dealer.
Attempting to do so will void your valuable warranty!
Make sure to use your ionizer only with potable water which is
suitable for human consumption.
DO NOT use your ionizer with well water, water with extreme hardness, high sediment or
TDS levels without first consulting your dealer.
Do not wash your ionizer by immersion or by pouring water over the main body;
always unplug your ionizer while cleaning the casing.
Clean with damp sponge or cloth.
220V
9 10
Safety Precautions
During Use
Do not run hot water through your ionizer.
Do not clean by pouring water over or spraying the ionizer.
Do not close, bend, pinch, press or otherwise obstruct
output ports or hoses.
If the appliance makes strange or unusual noises or burning
smells are detected, unplug the power cord immediately and
contact your dealer to arrange service.
Unplug your ionizer if you plan not to use it for an extended
period or turn off the main power switch on the back of the unit.
Filter replacement may be necessary.
pH Reagent Liquid Precautions
Do not expose the pH measuring reagent to extreme heat, flames
or fire. It is combustible.
Do not drink the pH reagent liquid, put it in the eyes or apply to the body.
- If the liquid is ingested, induce vomiting immediately and call
a doctor.
- If the liquid gets in the eyes, flush immediately and thoroughly
with cool water; call a doctor.
- If spilled or dropped on your body, wash if off immediately.
Make sure to keep the pH reagent liquid tightly closed and out of the reach of children.
Acidic water is effective for washing and rinsing.
In order to clean the product's internal parts and in order to drink clean water, acidic water should
be run through the alkaline water tube 2 or 3 times per week and the faucet pipe should be cleaned
as well.
Some helpful tips
For storing your alkaline water, glass or ceramic is best. Always try and
keep your stored water cool and away from direct sunlight.
You can use plastic, but only use lexan (number7) or poly bottles
(Nalge type). It is always best fresh out of the machine and ideal
if consumed on a day-to-day basis.
Do not store alkaline water in stainless steel, bronze or
aluminum containers.
Save the box and Styrofoam your ionizer came packed in.
This will help if your ionizer needs to be transported at a later date.
Do not use an ionizer downstream of a sodium-based ion exchange
softening system or Reverse Osmosis system without first consulting
your dealer.
Unplug your ionizer if you plan not to use it for an extended
period or turn off the main power switch on the back of the
unit. Filter replacement may be necessary.
11 12
Calcium cap
Speaker
Volume controller
Names and functions of Parts I
Front Back
Rear cover
Connector Port
Huse holder
Acidic water outlet port
Alkaline water outlet port
Tap water inlet
Main switch
AC Power cord
Filter cover
Body
13 14
Names and functions of Parts II
Faucet Display Panel
Body
Acidic Water Outlet
Alkaline Water Outlet
Function display panel
LEVEL
ALKALINE
ACIDIC
FILTERED
FILTER LIFE
3
Alkaline water display indicator
If Alkaline water is selected the BLUE
BLUE
indicator will be lit.
Acidic water display indicator
If Acidic water is selected the ORANGE
ORANGE
indicator will be lit.
Filtered water display indicator
If Filtered water is selected the GREEN
GREEN
indicator will be lit.
pH level indicator
This numeric display will indicate which level (1-4) is selected.
If alkaline water is selected the number will be displayed in BLUE
BLUE
,
if acidic water is selected, the number will be displayed in ORANGE
ORANGE
.
Filter life indicator
Displays the current filter life used.
When the scale reaches the top and flickers,
it is time to replace your filter.
"ALKALINE" water button
Used to select alkaline water and the desired level (1-4)
"FILTERED" water button
Used to select filtered water.
"ACIDIC" water button
Used to select acidic water and the desired level (1-4)
"POWER" button
Starts and stops water flow into your ionizer.
POWER
FILTERED
ACIDIC
ALKALINE
15 16
Accessories
How to Install How to connect water faucet
How To Install Connecting the Delphi faucet
pH test kit
Hose(1/4")
Hose(5/16")
Manual
Alkaline Water
Acidic Water
Tap Water
Tap Water
Connect Wire
Water Ionizer
DUST PRE- FILTER
Faucet
Tap water
Faucet
Circle Plate
Circle Plate
Tool
Large Alkaline
Water Fitting
Small Acidic
Water Fitting
1
2
Use appropriate tools to make 30mm
diameter hole in the location where you will set
up the faucet. Make sure the faucet location
will allow both spouts to reach the sink.
Place the faucet in the hole properly over
the gasket.
3
4
Insert the faucet in the hole and then screw
it with a nut to make it be fixed.
30mm
(Alkaline Water Hose)
(Acidic/Tap Water Hose)
Connector Cord
1/4” Tube(Acidic Water)
5/16” Tube(Alkaline Water)
Acidic Water
Alkaline Water Connector Cord
All the fittings are push in style fittings. To attach the hoses to any fitting, firmly insert the end of
the hose into the fitting. Pull firmly to check to connection - you should not be able to pull the
hose out. To release the hose from the fitting, you must push the spring loaded ring protruding
from the end of the fitting while pulling the hose out.
WARNING
WARNING
: incorrect installation could void your valuable warranty
: incorrect installation could void your valuable warranty
- professional installation is recommended.
- professional installation is recommended.
After the faucet is fixed, connect it to fitting
with 5/16” hose(for Alkaline) like figure 4.
Check the hose whether it is inserted properly
or not. Also, connect it with 1/4” hose(for Acidic)
like figure 4 and connect the faucet to the body
with connector cord.
Figure 1
Figure 2
Figure 3
Figure 4
Gasket
(installed under
the Faucet)
Product Requirement :
Product Requirement :
Water pressure should be maintained at a constant rate,
Water pressure should be maintained at a constant rate,
when the water pressure is too low, water cannot flow through the unit.
when the water pressure is too low, water cannot flow through the unit.
17 18
How to Install
Connecting the faucet and cold water hoses to the Ionizer
Tap water
6
7
8
9
10
11
12
Connect Wire
Hose(5/16")
Hose(1/4")
Alkaline Water
Tap Water(1/4")
Acidic Water
Power Cord
DUST PRE- FILTER
Faucet
1
2
3
4
1
2
3
POWER UP YOUR IONIZER.
Turn the power button on.
Turn the power button to the "ON" position
on the back of the ionizer.
- The power button is ALWAYS left on.
- The power button is ALWAYS left on.
TURN ON THE WATER
Turn on the water by opening the water supply valve.
To select Alkaline water
Initial operation
START WATER FLOW THROUGH YOUR IONIZER
- Depress the "POWER" button on the top of your Delphi faucet to start the water flow.
- NOTE: The water may initially come out discolored (light to charcoal gray) due to carbon
particulates in the new filter.
- This is not harmful and is typical of all carbon filters. Allow the water to flow for 2-3 minutes
in the "Purified" mode and this will flush all the carbon dust.
With the water running through your Delphi faucet then:
Depress the "ALKALINE" button to select the desired setting from 1 - 4. The alkaline water will come
out from the top spout. The display panel on the front of the faucet will show a blue Alkaline indicator
and blue number corresponding to the level selected.
Note: Your ionizer will always "remember" the last setting used.
If the previous selection was Alkaline Level 2, when you start flow through the ionizer next time
you use the ionizer it will automatically process at Alkaline Level 2.
How to Use
Place the Ionizer in an appropriate place under your sink
Connect the 1/4inch Acidic Water Hose to the small fitting on the Acidic Hose extending
from the faucet to Acidic Water Outlet on the Ionizer. Pull firmly to check to connection -
you should not be able to pull the hose out.
Connect 5/16 inch Alkaline Water Hose attached to the threaded stem of the faucet to the
Alkaline Water Outlet on the ionizer. Pull firmly to check to connection - you should not be
able to pull the hose out.
Install the dust pre-filter in the middle of a length of 1/4 inch hose with the arrow pointed at
the ionizer. Connect the 1/4 inch hose with dust filter to Tap Water Inlet on the bottom of
the ionizer. Pull firmly to check to connection - you should not be able to pull the hose out.
Join the wire from the faucet to the Connect Wire. Plug the Connector Cord into the
Connector Port on the back of the ionizer.
Connect the power cord into an appropriate outlet.
Make sure the outlet you plug your Delphi into is live, and remember that many outlets under
the sink are controlled by an on/off switch.
External Valve
Connect the external valve between the hoses.
If the water pressure is excessively high, adjust the water flow by turning
the external valve.
To get the proper pH and ORP value of ionized water, set the external valve
to allow 1.5 liters of water per minute to flow through the ionizer.
How to install the external valve
1/4" hose
Tabla de contenidos
Otros manuales de Sistema de filtración de agua de Emco Tech
