EMAC Em104P-i8523 Manual de usuario
To learn more about EMAC’s products and services and how they can help your project
http://ftp.emacinc.com/Tech_Info/About_EMAC_Products_and_Services.pdf
Authorized Distributor, Integrator, and Value-Added Reseller
Manual downloaded from ftp.emacinc.com
For purchase information please contact info@emacinc.com
For technical support please submit a ticket at www.emacinc.com/support
Em104P-i8523
Computer On Module (COM)
User’s Manual
Version 1.0
2007.06
Table of Contents
Chapter 1 Introduction ............................................................4
1.1 Copyright Notice ..........................................................................5
1.2 About User’s Manual ..................................................................5
1.3 Warning ......................................................................................5
1.4 Replacing the lithium battery .......................................................6
1.5 Technical Support .......................................................................6
1.6 Warranty .....................................................................................7
1.7 Packing List ................................................................................8
1.8 Ordering Information ...................................................................9
1.9 Specification ...............................................................................9
1.10 Board Dimensions ...................................................................10
Chapter 2 Installation .............................................................12
Jumpers
2.1 Jumpers and Connectors .........................................................13
2.2 JVLCD1: LCD Panel Voltage Select .........................................14
2.3 JBAT1: CMOS Setup ................................................................14
Connectors
2.4 LVDS1/ LVDS2: LVDS LCD Connector .....................................15
2.5 PC/104 Plus: PC/104+ PCI Interface ........................................15
2.6 COM1/ COM2 ...........................................................................16
2.7 LPT1/ FDD1: Parallel Port or FDD Connector ..........................16
2.8 FAN1: CPU Fan Power Connector ............................................17
2.9 KBM1: Keyboard & Mouse ........................................................17
2.10 PWR1: Power Supply Connector ............................................17
2.11 JFRT1: Switches and Indicators .............................................18
2.12 PC/104: PC/104 ISA Interface .................................................18
2.13 INV1: LCD Inverter Connector ................................................18
2.14 LAN1: Fast Ethernet Connector ..............................................19
2.15 AUDIO1: Audio Interface Connector ......................................19
2.16 USB1/ USB2: USB Connector ................................................19
2.17 IDE1: 44-pin IDE Connector ...................................................20
2.18 VGA1: CRT Connector ...........................................................21
2.19 Heatsink Installation ................................................................21
Index
2
Index
3
Chapter 3 BIOS ......................................................................22
3.1 BIOS Introduction .....................................................................23
3.2 BIOS Setup ..............................................................................23
3.3 Standard CMOS Features ........................................................24
3.4 Advanced BIOS Features ........................................................27
3.5 Advanced Chipset Features .....................................................31
3.6 Integrated Peripherals ..............................................................35
3.7 Power Management Setup .......................................................39
3.8 PNP/PCI Configurations ...........................................................42
3.9 PC Health Status ......................................................................44
3.10 Frequency/Voltage Control ......................................................45
3.11 Load Optimized Defaults .........................................................46
3.12 Set Password ..........................................................................47
3.13 Save & Exit Setup ....................................................................48
3.14 Exit Without Saving .................................................................49
3.15 BIOS Beep Sound core list ......................................................50
3.16 BIOS memory mapping ...........................................................50
3.17 Award BIOS Post Codes .........................................................51
Chapter 4 Appendix ...............................................................56
4.1 I/O Port Address Map ................................................................57
4.2 Interrupt Request Lines (IRQ) ...................................................60
Introduction
4
1Chapter 1
Introduction
Introduction
5
1.1 Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indi-
rect, special, incidental, or consequential damages arising from the use or in-
ability to use the product or documentation, even if advised of the possibility
of such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any me-
chanical, electronic, or other means in any form without prior written permis-
sion of the manufacturer.
1.2 About User’s Manual
This User’s Manual is intended for experienced users and integrators with
hardware knowledge of personal computers. If you are not sure about any
description in this User’s Manual, please consult your vendor before further
handling.
1.3 Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should always follow
the following precautions when handling it :
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that came
with the Single Board Computer, whenever components are separated
from the system
Introduction
6
1.4 Replacing the lithium battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery
type recommended by the manufacturer.
Do not throw lithium batteries into the trashcan. It must be disposed of in
accordance with local requlations concerning special waste.
1.5 Technical Support
If you have any technical difficulites, please contact support first at:
http://www.emacinc.com/support
Please do not hesitate to call or e-mail our customer service when you still
can not find out the answer.
http://www.emacinc.com
E-mail: info@emacinc.com
Introduction
7
1.6 Warranty
This product is warranted to be in good working order for a period of two
years from the date of purchase. Should this product fail to be in good
working order at any time during this period, we will, at our option, replace
or repair it at no additional charge except as set forth in the following terms.
This warranty does not apply to products damaged by misuse, modifications,
accident or disaster.
Vendor assumes no liability for any damages, lost profits, lost savings or any
other incidental or consequential damage resulting from the use, misuse of,
or inability to use this product. Vendor will not be liable for any claim made
by any other related party.
Vendors disclaim all other warranties, either expressed or implied, including
but not limited to implied warranties of merchantibility and fitness for a par-
ticular purpose, with respect to the hardware, the accompanying product’s
manual(s) and written materials, and any accompanying hardware. This
limited warranty gives you specific legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
faxing the vendor and requesting a Return Merchandise Authorization (RMA)
number. Returned goods should always be accompanied by a clear problem
description.
Introduction
8
1.7 Packing List
If any of the above items is damaged or missing, contact your vendor
immediately.
1 x Em104P-i8523
1x CPU Heat Sink
1 x CD-ROM (Optional for Drivers and Manuals)
1 x RJ45 cover
Tabla de contenidos
Otros manuales de Hardware de computadora de EMAC
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
