Thank you for choosing Elvid. The Elvid FieldVision OCM-7PWV is a
professional 7″video monitor that’s packed with features to help you
optimize your image. The FieldVision is equipped with 3G-SDI and HDMI
inputs with loop-through, plus component and composite video inputs for
exible connectivity. The 7″LED panel’s native resolution is 1280 × 800,
and you can set the aspect ratio to full screen (16:10), 16:9, or 4:3.
The FieldVision incorporates onscreen graphs including waveform, zebra
exposure indicator, false color display, and histogram to provide a visual
guide so you can achieve precise exposure levels. Other tools such as
peaking to ne-tune your focus, and RGB Parade histogram and vectorscope
to check color saturation and accuracy make it easy to rene your picture.
There are also broadcast-specic features like underscan, safety frame
markers, tally lights, and H/V delay.
There are a variety of options for personalizing the FieldVision to suit your
specic needs. Choose from a palette of 19 functions from which you can set
each of the four function buttons to provide shortcuts for enabling modes,
graphs, and scopes. You can also reassign the four knobs to adjust volume,
sharpness, and the backlight instead of using their pre-labeled functions.
There’s an integrated speaker and a 3.5 mm stereo headphone output for
live audio monitoring, plus an onscreen audio meter for checking audio
levels as you record.
The FieldVision contains a variety of power options so you won’t have to
scramble to power it. Available battery plates and an included adapter plate
let you mount common standard camera batteries or, for longer run-times,
three-stud and V-mount batteries. The FieldVision also comes with a power
and tally cable to run the monitor via 4-pin XLR or AC sources and to take
advantage of your studio tally system.
INTRODUCTION
32
• Please read and follow these
instructions and keep this manual in
a safe place.
• Exposure to high sound levels can
cause permanent hearing loss.
Avoid listening at high volumes for
extended periods of time.
• Keep this product away from water
and any ammable gases or liquids.
• Make sure this product is powered
off when plugging it into a power
source.
• Use only the correct, recommended
voltage.
• Do not attempt to disassemble or
repair this product.
• Do not place or store the RigVision
facedown, since this can damage
the screen.
• Handle this product with care. Avoid
any unnecessary impacts to this
product.
• Do not block the vents in this
product.
• Disconnect this product from its
power source before storage and
during electrical storms.
• Do not use chemical solutions to
clean this product. Clean it with only
a soft, dry cloth.
• Keep this product away from
children.
• Make sure that this product is intact
and that there are no missing parts.
• To avoid damage to this product,
be careful not to overtighten or
improperly thread any of the
threaded ttings.
• All photos are for illustrative
purposes only.
• This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.
PRECAUTIONS
