Elvid OCM-101-4KH Manual de usuario
3
The Elvid FieldVision OCM-101-4KH puts a lightweight yet sophisticated
10-inch 4K monitor right on top of your camera. Unlike the tiny integrated
screens of DSLR and pro video cameras and camcorders, this monitor will
deliver a large, bright, and color-accurate image along with the features
to ensure the images you capture are professional and awless.
The FieldVision OCM-101-4KH can display signals up to UHD 4K
(3840 × 2160) and DCI 4K (4096 × 2160). The LCD panel’s native
resolution of 1920 × 1200 provides a sharp image and facilitates precise
color rendering. It offers a native aspect ratio of 16:10, but you can set the
screen to your preferred size, along with four zoom presets. In addition,
pixel-to-pixel mode gives you the actual quality of 4K resolution in order
to see the ne details of your image. Advanced tools like Check Field
help calibrate the monitor, and a dedicated DSLR menu mode scales and
positions the incoming video signal when shooting with a DSLR.
Two programmable function buttons provide quick shortcuts to the tools
you want at your ngertips. The extensive on-screen menus make it easy
to adjust your image, and they offer adjustments for brightness, contrast,
tint, sharpness, color temperature, and saturation, as well as broadcast-
specic features like safety frame markers and multiple display formats.
THANK YOU FOR CHOOSING ELVID.
4
• Exposure to high sound levels
can cause permanent hearing
loss. Avoid listening at high
volumes for extended periods
of time.
• Keep this product away from
water and any ammable
gases or liquids.
• Do not expose this product
to humidity or extreme heat
or cold.
• Make sure this product is
powered off when plugging it
into a power source.
• Use only the correct,
recommended voltage.
• Do not attempt to disassemble
or repair this product.
• Do not place or store the
monitor facedown, since this
can damage the screen.
• Do not block the vents in this
product.
• Handle this product with care.
Avoid any impacts to this
product.
• Disconnect this product from
its power source before storage
and during electrical storms.
• Do not use chemical solutions
to clean this product. Clean it
with only a soft, dry cloth.
• Keep this product away from
children.
• Make sure that this product
is intact and that there are no
missing parts.
• To avoid damage to this
product, be careful not to
overtighten or improperly
thread any of the threaded
ttings.
• All images are for illustrative
purposes only.
PRECAUTIONS
5
BOX
CONTENTS
• Monitor
• Sun hood
• Sun hood bracket
• Mini HDMI to HDMI cable
(C-A)
• NP-F battery plate
• Screws (×4)
• 1/4-20 setscrew
• Hex key
• 12 V DC power supply
• Shoe-mount ballhead
6
OVERVIEW
VGA UPGRADE HDMI OUT HDMI IN DC 12V
Speakers
BACK
Battery plate/VESA
mounting sockets
VGA input
USB port HDMI output
HDMI input
Headphone output
12 V DC power socket
1/4-20 threaded
mounting sockets
7
/INPUT F1 F2 EXIT MENU
TOP
Power indicator
Menu dial
Exit button
F1 / F2 buttosn
Power button
1/4-20 threaded
mounting socket
8
POWERING
OPTIONS
There are two ways to power the FieldVision monitor: AC
power or NP-F battery (not included).
NP-F BATTERY
1. Align the battery plate
with the mounting
sockets on the back of the
monitor. Make sure the
battery plate’s power cable
is on the same side as the
monitor’s power input.
2. Screw the plate onto the monitor with the four included
screws.
3. Place an NP-F battery into
the battery slot, slide it in
so it locks into place, and
plug the battery plate’s
power cord into the power
socket.
9
Important! The battery should easily slide into the battery slot.
Don’t use force to attach the battery. Doing so could damage
the battery or the contacts.
Remove the battery by pressing the battery release button
and sliding the battery out.
AC POWER
Plug the 12 V power supply
into the monitor’s power
input, and plug the other end
into a power outlet.
10
ATTACHING
THE SUN
HOOD
The sun hood prevents glare on the monitor’s screen by
blocking out stray light, and it is useful when shooting
outdoors.
1. Snap the sun hood bracket
onto the front of the
monitor.
2. Attach the long side of
the sun hood to the touch-
connect strip at the top of
the bracket.
3. Fold out the sun hood’s
two sides and press them
against the bracket’s
touch-connect strips.
Tabla de contenidos
Otros manuales de Monitor de Elvid
Elvid
Elvid OCM-7B-4KV2 Manual de usuario
Elvid
Elvid Studiovision STV-150-4KH Manual de usuario
Elvid
Elvid STUDIOVISION SRM-7X2-4KH Manual de usuario
Elvid
Elvid RVM-7B-ALT Manual de usuario
Elvid
Elvid OCM-10-PSM Manual de usuario
Elvid
Elvid OCM-7PWV Manual de usuario
Elvid
Elvid OCM-7B-D FieldVision Manual de usuario
Elvid
Elvid WCM-758G SkyVision Manual de usuario
Elvid
Elvid StudioVision STV-280-4KHDR Manual de usuario
Elvid
Elvid RIGVISION RVM-5P-HDR Manual de usuario
