ELTEX RR-10 Manual de usuario
Wireless signal repeater
RR-10
User manual
Firmware version1.0.0
RR-10 wireless signal repeater. User manual
Contents – 2
Contents
Introduction ...................................................................................................................................... 4
Conventions ..........................................................................................................................................4
Product description .......................................................................................................................... 5
Purpose..................................................................................................................................................5
Device characteristic.............................................................................................................................5
Connection diagrams for RR-10 ................................................................................................ 5
2.4 GHz repeater:........................................................................................................................... 5
5 GHz repeater:.............................................................................................................................. 6
Access point:.................................................................................................................................. 6
Use case......................................................................................................................................7
Main technical parameters...................................................................................................................7
Form-factor ...........................................................................................................................................9
Front panel of the device. State indication .............................................................................. 9
Rear panel of the device. LAN connection indication ............................................................10
LAN connector indication ........................................................................................................... 10
Bottom panel of the device .....................................................................................................11
Resetting to factory settings...............................................................................................................11
Supply package...................................................................................................................................12
Installation ...................................................................................................................................... 13
Safety instructions ..............................................................................................................................13
Installation recommendations...........................................................................................................13
Connecting RR-10 to a network..........................................................................................................13
Method 1. UsingWPS button...................................................................................................13
Method 2. Via the web interface.............................................................................................. 14
Device management via the web interface ................................................................................... 15
Device control panel ...........................................................................................................................15
«Status» tab.........................................................................................................................................15
«Wi-Fi» tab ...........................................................................................................................................17
«Connect to Network» page ....................................................................................................17
Connecting to the access point network ................................................................................... 17
«Advanced network» page.......................................................................................................18
RR-10 wireless signal repeater. User manual
Contents – 3
«Network» tab .....................................................................................................................................20
Connecting to the access point network ................................................................................ 20
«System» tab .......................................................................................................................................20
«Admin account» page.............................................................................................................20
«Firmware upgrade» page .......................................................................................................21
Problems and solutions.................................................................................................................. 22
RR-10 wireless signal repeater. User manual
Introduction – 4
Introduction
No matter how good modern access points are, the situation with insufficient coverage is still relevant.
There are several solutions, and one of the easiest in terms of installation and configuration is the use of
special network devices — repeaters.RR-10 is a device that is designed to expand the coverage area of
wireless networks and enhance Wi-Fi signal.RR-10 allows you to eliminate blind spots of networks in
private homes, multi-room apartments, and small offices.
This manual describes the purpose, main technical characteristics, design, installation procedure, rules
for configuring, monitoring, and changing the software of the RR-10 wireless signal repeater.
Conventions
Notes and warnings
Notes contain important information, tips, or recommendations for using and configuring your
device.
Warnings inform the user on situations that can harm the device or a person, lead to incorrect
operation of the device or loss of data.
RR-10 wireless signal repeater. User manual
Product description – 5
•
•
•
•
•
•
•
•
Product description
Purpose
RR-10 is a wireless signal repeater designed to extend the coverage area of wireless networks and
enhance Wi-Fi signal. The device allows you to eliminate blind spots and optimize the performance of
your Wi-Fi network. With support for IEEE 802.11n/ac standards, RR-10 repeater provides high data
transfer rates and is capable to provide high-quality multimedia transmission of 4K content.The use of
MIMO technology and internal antennas makes RR-10 a universal solution for expanding your home
network.
Device characteristic
The device is powered through an external 5.3 V adapter from a 220 V network.
Interfaces:
LAN: 1 Ethernet port 10/100/1000BASE-T (RJ-45);
WLAN: IEEE 802.11b/g/n 2.4 GHz and 802.11a/n/ac 5 GHz.
Functions:
Support for WPA/WPA2 encryption standards;
WMM;
WPS;
Wireless Multicast Forwarding;
Support WiFi IEEE 802.11a/b/g/n/ac;
MIMO 2x2 technology support.
Connection diagrams for RR-10
2.4 GHz repeater:
RR-10 wireless signal repeater. User manual
Product description – 6
5 GHz repeater:
Access point:
RR-10 wireless signal repeater. User manual
Product description – 7
Use case
Main technical parameters
General parameters
Processor Realtek RTL8197FS-VG
Clock frequency 1 GHz
RAM 128 MB
RR-10 wireless signal repeater. User manual
Product description – 8
ROM (system memory) 16 MB
Operating system Linux 3.10
Ethernet LAN interface parameters
Number of interfaces 1
Connector type RJ-45
Data rate, Mbps 10/100/1000, auto-negotiation
Standards supported BASE-T
Wireless interface parameters
Number of antennas 2
Antennas type internal
Standards 802.11a/b/g/n/ac
Frequency range 2412–2472 MHz,
5180–5320 MHz,
5660–5805 MHz
MIMO 2.4 GHz 2x2
5 GHz 2x2
Modulation 2.4 GHz: DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM
5 GHz: BPSK, QPSK, 16QAM, 64QAM, 256QAM
Data rate 802.11b up to 11 Mbps
802.11a up to 54 Mbps
802.11g up to 54 Mbps
802.11n (HT20) up to 144 Mbps
802.11n (HT40) up to 300 Mbps
802.11ac (HT80) up to 866 Mbps
Maximum output power of the transmitter 2.4 GHz: -20 dBm
5 GHz: -20 dBm
Receiver sensitivity 2.4 GHz: -93 dBm
5 GHz: -93 dBm
Security WEP, WPA (TKIP+AES), WPA2 (TKIP+AES), WPA/WPA2
(TKIP+AES)
Management
Remote management web interface
RR-10 wireless signal repeater. User manual
Product description – 9
Access restriction by password
Physical specifications and ambient parameters
Power supply external power adapter 5.3 V DC, 2A
Power consumption no more than 4 W
Operating temperature range from +5 to +40°C
Operating relevant humidity at 25°C up to 80%
Dimensions (Diameter x Height) 100 x 23 mm
Weight 85 g
Form-factor
RR-10 wireless signal repeater is implemented in a plastic case with dimensions of Ø100 x 23 mm.
Front panel of the device. State indication
Front panel of RR-10
Description of front panel indicator
Indicator Indicator status Device status
1 LED shows the device
operation status
Solid red The device is launching (no more than 1 minute)
Flashing red The device is updating/reseting
Solid yellow The device is turned on, there is no connection to the
access point or the Internet
Flashing yellow The device is connecting to an access point through WPS
technology
Solid green The device has been connected to an access point and has
access to the Internet
RR-10 wireless signal repeater. User manual
Product description – 10
Rear panel of the device. LAN connection indication
Rear panel of RR-10
Rear panel element Description
1Button for connecting clients via WPS protocol
2 LAN 10/100/1000BASE-T port (RJ-45 connector) for connection to a network
3 LED LAN connector indicators
4 5 VDC Power adapter connector
LAN connector indication
LAN indicators state LAN connection state
Only green lights The connection is established at 10/100 Mbps
Green and orange lights The connection is established at 1000 Mbps
Flashes The process of packet data transmission over the LAN interface
Otros manuales para RR-10
1
Tabla de contenidos
Otros manuales de Reloj de repetición de ELTEX
