Elsat INode Control ID Manual de usuario

iNode Control ID

Instruction manual

iNode Control ID – instruction manual ELSAT s.c.

1. About iNode

We would like to introduce a family of iNode devices working in the Bluetooth Low Energy ®. We

will show you that it's not just tags to find lost keys, whether location tags, ut still something more.

Our devices are capa le of:

these are mainly attery device.

work without attery replacement for up to 12 months, depending on the type of application and

usage.

have memory for logging events, readings of measurements, etc.

contain precise temperature, humidity sensors, accelerometer or magnetometer which allow

home automation control, care of older persons or vehicle detection.

as a remote control device, although a small power consumption, have a large range and features

unavaila le to other competitive facilities - password protection, AES encryption, control

directly from the smartphone with BT 4.0.

a unique encryption technology ensures the safety of the JPEG images recorded y our cameras.

BT4.0 - LAN or BT4.0 - GSM gateways connect iNode sensors with the Internet.

iNode can also help to control the movement of people or goods, saving the time of appearance and

disappearance (active RFID ® long range). New features related to the development of the product

is also not a pro lem – this allows to remote firmware update with PC or smartphone with

Bluetooth 4.0 ® and Low Energy Bluetooth ena led ® (Smart Bluetooth ®).

iNode Control ID is an intelligent & wireless BT 4.0 ID (RFID System). Intended mainly for

the control of security personnel. It can also e used as a so-called electronic key. The

authorization method of iNode Control ID identifiers, ased on Challenge/Response protocol

using AES128 encryption provides a very high degree of security. In case of success the output

contact of iNode Control Point is closed for example to energize the rail opening the door

while in the iNode Control ID is written the information a out the event. Later reading of

iNode Control ID allows you to determine what rooms and when were visited y a person

owing this identifier.

Trademarks or registered trademarks:

Bluetooth Low Energy ®, Bluetooth 4.0 ®, RFID®,CSR®,Window ®, Android, Google, Micro oft, ThingSpeak, Ra pberry Pi,

Domoticz, BlueZ, Linux are used for informational purposes only.

All trademarks are property of their respective owners.

page 2

iNode Control ID – instruction manual ELSAT s.c.

2. iNode Control ID

Install application iNode Setup and BT4.0 drivers on PC. Next run iNode Setup application (on

Windows 7 to 10 with administrative rights), and press the red utton with magnifying glass picture.

If a BLE device you want connect to is password protected you should type the password in the text

ox with a key If you press the utton you can change the type of adapter which will e used

to communication – standard BT4.0 adapter (signed CSR …), iNode Serial Tran ceiver (signed

COM ...) or iNode LAN (signed the name of the device).

In case the application cannot start or system error you should try to install Micro oft Vi ual C++

2005 Service Pack 1 Redi tributable Package MFC Security Update from that page:

http://www.microsoft.com/en-us/download/confirmation.aspx?id=26347.

iNode Setup will find all near y iNode devices and sort them regarding receiving signal strength.

Each type of iNode device has a different icon. For iNode Control ID it is the first picture in the

first row in the window elow.

To configure iNode Control ID device you should dou le click on its icon. Application connects

with this device and reads its settings:

page 3

iNode Control ID – instruction manual ELSAT s.c.

At the top of the window there is displayed following information:

the name of the iNode family – in this case iNode Control ID;

the unique device identifier;

attery level: 100% means 3V or greater, while 0% it is 1,8V;

signal strength received y this device from the BT4.0 adapter or iNode LAN;

temperature;

At the Bluetooth ta there are following items:

Name: you can change default device name typing a new one in this text ox. Its length is 16

characters maximum.

Tx power: determine the power the device roadcasts and simultaneously the range the device

can e scanned. If iNode Control Point has set the scan range ~200m, and iNode Control ID

has set the roadcast power -2dBm range 33% then effective distance from which the device can

e scanned is equal 200m*0,33=66m.

UUID ident: necessary for some applications or different iNode devices e.g. iNode Control

Point. Its length is 16 characters maximum.

Adverti ing: you can chose the channels the iNode Control ID roadcasts advertising frames.

This way the attery life can e extended ut device can e more difficult to scan. Additionally

the advertisement interval can e chosen. This time determine how fast you can connect with the

device.

You can save modified settings y pressing the Write utton.

page 4

iNode Control ID – instruction manual ELSAT s.c.

The picture elow shows the Security ta :

The following items can e set:

Connection i po ible from thi computer only: this option ena le you to protect the iNode

Control ID access from others PCs or phones. You can reset this protection y attery removing

for at least one minute. This type of protection cannot e set in case of iNode Control Point.

Connection i pa word protected: access to the iNode Control ID is password protected.

Password length is 16 characters maximum.

Battery removing will clear the pa word: if you unchecked this option than please remem er

that if you forget the password it can e cleared y manufacturer only.

You can save modified settings y pressing the Write utton.

page 5

iNode Control ID – instruction manual ELSAT s.c.

The picture elow shows the Data ta :

Clear data utton erases the archived data memory and at the same time ena ling archiving data.

Data in memory are saved in a cyclical uffer, eg. after it is full, the oldest data will e erased.

Memory has a capacity of 8192 records. One is the record time stamp and each entry from the

iNode Control Point.

page 6

iNode Control ID – instruction manual ELSAT s.c.

The picture elow shows the Firmware ta :

Current firmware ver ion field shows the version and creation date of the firmware in the device.

To change the firmware in the device first select New firmware file.

Firmware is uploaded to the device after clicking Send firmware utton. Application checks if this

firmware is correct for this type of device to avoid situation that we want to upload the firmware

which needs the utton to e pressed for roadcasting in the device ut this device doesn't have it.

The fep files with the firmware, manuals or other information you can find at our technical support:

http://support.inode.pl/ user: inode no password.

page 7

iNode Control ID – instruction manual ELSAT s.c.

3. Battery replacement

The CR2032 attery from iNode Control ID should work up to 12 months. So really the speed of

consumption depends on many factors such as operating temperature, frequency of colla oration

with the PC or Smartphone (reading the recorded data), set the transmit power level, etc.

Characteristics of the attery voltage as a function of time is over a long period of time, practically

flat. Only at the end of the attery voltage egins to decrease sharply, and its internal resistance,

which leads to rapid consumption.

In order to replace the attery:

1. Open the cover:

The iNode cover can e opened without the use of tools. The most comforta le way

to do it like the walnut shell opens. Simply insert into the gap etween the two parts

of the casing nails of thum s and opens it. Inside there is a printed circuit oard, with

the metal attery holder.

2. Remove the circuit oard from the enclosure:

The attery is inserted into the holder on the side. It can not e removed if the plate

is located in the housing.

3. Pull out the holder the old attery.

4. Insert the new attery:

The attery like a coin has two sides. On one of them there is a large "+" sign and

usually the name of the manufacturer. The other party usually has no markings. Insert

the attery so that the side marked "+" touches with metal handle (it has also the "+"

sign). If the operation was carried out correctly the LED should start flashing.

5. Insert the circuit oard into the housing:

The printed circuit oard is not perfectly round has a slight chamfer on one side.

Suits him a little ulge inside the case. By inserting the plate into the housing, pay

attention to these two items were facing each other.

6. Close the cover:

On one of the parts of the enclosure there is a pin. You need to set it up so that it was

in the vicinity of the eheading descri ed in the previous paragraph. Only with this

setting the cover will close properly

page 8

iNode Control ID – instruction manual ELSAT s.c.

4. Technical information

Bluetooth Low Energy:

configura le from your PC:

◦the power with which the device operates in the range of-18 dBm + 8 dBm (maximum range up to 200 m

in open space);

◦the name of the device;

◦the password of the user;

◦the password to access the device; independent of the user's password, the password for the authorization

application on the smartphone or PC (protects against its copying and use y another client);

Power upply:

the attery CR2032;

Hou ing:

plastic;

dimensions: Ø 32 mm x 9.5 mm;

Other:

remote firmware update;

counterfactual firmware: iNode Care Sensor #1;

two LEDs;

10- it or 14- it motion sensor, 3-axis accelerometer;

temperature sensor with a resolution of 1 °C;

operating temperature: from -30 to 65 °C;

humidity: 20-80 % RHG;

weight: 5 g;

Equipment:

the attery CR2032;

Software:

Windows XP/Vista/7.0/8.0/8.1/10.0;

Linux;

Chip et:

CSR 101x

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES AND/OR IMPROVEMENTS IN DESIGNS, FEATURES &

DIMENSIONS WITHOUT NOTICE AND WITHOUT INCURRING OBLIGATION

page 9

iNode Control ID – instruction manual ELSAT s.c.

5. Di po al

All the packaging materials are recycla le and are la eled as such. Dispose of

the packaging in accordance with local regulations. Keep the materials out of

children reach, as the materials can pose a hazard.

Proper di po al:

According to WEEE Directive (2012/19/UE) the crossed-out wheelie in sym ol (shown on

the left) is used to la el all electric and electronic devices requiring segregation.

Do not dispose of the spent product with domestic waste: hand it over to an electric and

electronic device collection and recycling point. The crossed-out wheelie in sym ol placed

on the product, instruction manual or package communicates this requirement.

Plastics contained in the device can e recycled in accordance with their specific marking.

By recycling materials and spent equipment you will help to protect the environment.

Information on electric and electronic devices collection locations is availa le from local

government agencies or from the dealer.

Spent or fully discharged single-use and rechargea le atteries must e discarded in

dedicated la eled ins, handed over to hazardous waste collectors or returned to electric

equipment dealers.

page 10

Tabla de contenidos

Manuales populares de Sistema RFID de otras marcas

Chainway

Chainway R1 Manual de usuario

IFM

IFM DTC600 Manual de usuario

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Manual de usuario

RHOMBUS

RHOMBUS DR20 Manual de usuario

Sirit

Sirit IDentity 6204 Manual de usuario

SOREX

SOREX FLEX Manual de usuario

Omron

Omron V780-HMD68-EIP-KR Manual de usuario

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Instrucciones de uso

Shuttle

Shuttle BR06 Instrucciones de uso

Digilock

Digilock Curve Keypad Basic Manual de usuario

Atid

Atid AT870 Manual de usuario

Chacon

Chacon 34958 Manual de usuario

Paxton

Paxton PROXIMITY architectural reader Manual de usuario

CipherLab

CipherLab 1800 series Manual de usuario

Brady

Brady FR22 Manual de usuario

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Manual de usuario

Unitech

Unitech RH767 Manual de usuario

Honeywell

Honeywell 026366.00 Manual de usuario

Elsat iNode Control ID Manual de usuario

Manuales populares de Sistema RFID de otras marcas