Elsat iNode Care GSM Manual de usuario
iNode Care
GSM
Bluetooth – GSM gateway
user manual
© 2018-2020 ELSAT ®
iNode Care GSM – user manual ELSAT s.c.
1. Introduction
We would like to introduce you to the family of iNode devices operating in
Bluetooth Low Energy ® technology. We will show you that BLE is not only tags for
nding lost keys or location tags, ut something more.
Our devices can do this and more:
•These are primarily attery devices.
•Operate without replacing it for up to 12 months depending on the
application and method of use.
•They have memory for recording events, measurement readings etc.
•Precise temperature, humidity, acceleration or magnetic eld sensors allow
for precise control of home automation or care for the elderly.
• As remote control devices, despite their low power consumption, they have
a large range and features inaccessi le to other competing devices - own
user password, AES encryption, control directly from a smartphone.
•BT4.0 - LAN or BT4.0 - GSM gateways connect iNode sensors with the
Internet.
iNode can also help control the movement of people or goods, saving the
time of appearance and disappearance from the range of the recorder (active
RFID® with a long range). New functionalities related to product development are
also not a pro lem - it ena les remote rmware exchange from a PC or
smartphone with Bluetooth 4.0® and Bluetooth Low Energy® (Bluetooth Smart®)
support.
iNode Care GSM allows for existence of BLE devices (Bluetooth Smart, IoT-
Internet of Things) in the IP protocol networks: GPRS and the Internet. Using the
iNode Care GSM you can receive alert notications from the iNode Care
Sensors either directly on your mo ile phone (SMS and/or CLIP) and/or to the
HTTP server in the Internet. You can nd here a sample of on-line charts
powered y ThingSpeak.com.
The product is made with the use of the GSM module G510 Open CPU company
Fi ocom (authorized distri utor Maritex). After the purchase, for registered
users, we provide the full source code for the iNode Care GSM and OpenCPU-
Kit.
Page 2
iNode Care GSM – user manual ELSAT s.c.
Please read this manual carefully before starting the installation! We cannot take
responsibility for damages resulting from improper use of the device.
Warning
This device is a class A device. In a residential environment it may cause radio
interference. In such cases, the user may be re uired to take appropriate
countermeasures.
2. SAFETY INFORMATION
Please read the safety information before switching on the device.
2.1 Power source
The device can e connected to the AC 230V 50Hz AC power network only
with 230V AC / 5V DC sta ilized power supply with dou le or reinforced insulation
and output over-current protection. The nominal value of this current can not e
greater than 2.1 A.
2.2 General conditions for safe use
•The device should e located in a safe and sta le place.
•The external power supply should e placed in an easily accessi le wall
socket (e.g. not hidden ehind furniture). Some power supplies of this type
do not have their own power switch, so disconnecting them is only possi le
y removing them from the wall socket completely.
•Do not use external power supplies outside the uilding or in places with
high humidity.
•When using a device with an external power supply, make sure that the
ca le is positioned so that it is not exposed to eing trampled on, hooked or
pulled out of the power supply y persons or animals moving around the
room.
•Do not place the device or the adapter on a wet surface. Do not use in a
humid environment. Do not allow wetting: e.g. rain through an open window.
Never place containers with liquids on the device or power supply: vases,
glasses, cans, glasses etc.
•Never place an open ?ame on the device or power supply: candles, oil
lamps, etc.
•If you notice any damage to the power cord or plug, please contact a service
center immediately to resolve the pro lem.
Page 3
iNode Care GSM – user manual ELSAT s.c.
2.3 Cleaning
•Before cleaning, always unplug the machine y unplugging the power cord
or adapter from the power outlet.
•Do not use liquid cleaners or aerosol cleaners.
•For cleaning only use a dry, soft, lint-free cloth.
2.4 Ventilation
•All openings and slots in the housing of the device or power supply are for
ventilation. They must not e covered or covered, as it may overheat the
internal components.
•Protect the device and power supply against access of small children a le to
throw small things into the ventilation holes
2.5 Service
•If necessary, take the device to a specialized service center. There are no
user servicea le controls or useful components inside.
2.6 Before commissioning
•Before starting the installation, check the compliance of your mains voltage
with the information on the device or power supply.
•Switching the power on and o@ from the power socket is always carried out
y holding the plug or the power supply housing, not the power cord.
•If only the power cord plug or adapter is in the wall socket, the device is still
powered. The DC power plug is the only element that disconnects power
from the device.
•If anything falls or falls inside the machine or the power supply, immediately
remove the plug from the wall socket. The device or power supply unit may
not e used until an expert inspection has een performed.
•Do not disassem le the device or power supply. There may e dangerous
voltage inside, threatening health and even life. Any repairs and adjustments
inside should only e performed y qualied service personnel.
2.7 Location
•Place the device and power supply in a place with good ventilation - free air
?ow. This will prevent internal components from overheating.
•Never place the device or the power supply near heating devices or in sunny
places.
•Never place heavy o jects on it.
2.8 Steam condensation
Under certain circumstances (e.g. sudden change of location from a cold
to a warm room) the device and / or the power supply may ecome covered with
steam, preventing the device from eing used temporarily. In this case, wait
a out 1 hour for the temperature of the device to sta ilize and the moisture to
evaporate.
Page 4
iNode Care GSM – user manual ELSAT s.c.
2.9 Connecting iNode Care GSM
To launch iNode LoRa GSM MQ in a GPRS/GSM network, follow these
steps:
◦Connect the GSM antenna to the device (Fig. 1). If it has a radiator, it
should e placed vertically.
◦Install the iNode GSM Setup application for conguration the iNode
Care GSM using USB. For Windows 10 it is necessary to use iNode Hub
Server application too.
A EN ION !!! Do not tilt the antenna radiator if it is tightened to the
device, otherwise it may be damaged. It should be remembered that
the antenna radiator should be at a minimum distance of 20 cm from
the human body.
SIM card
micro USB power
connector
GSM antenna SMA connecto
Fig. 1 Top view of the device
Page 5
iNode Care GSM – user manual ELSAT s.c.
3. LEDs
The table below shows how the red LED states.
Green LED shows BLE packet receiving.
Page 6
iNode Care GSM – user manual ELSAT s.c.
In the case of iNode Care GSM we choose: Wersja z układem FTDI - Version
with the FTDI chip
The Pamiętaj kod PIN - Remem er PIN option allows you to save the entered
PIN code in the rowser data ase.
After selecting the utton, we return to the asic application screen.
Page 9
iNode Care GSM – user manual ELSAT s.c.
Enter the default PIN code 1234 and press the Odczytaj - Read utton. After
proper reading of the conguration from iNode Care GSM all uttons will ecome
active.
The Reset utton restores the factory default settings of the device.
The Zapisz - Save utton remem ers the changes made in the iNode Care GSM
settings.
Page 10
Tabla de contenidos
Manuales populares de Puerta de otras marcas
LST
LST M500RFE-AS Manual de usuario
Kinnex
Kinnex Media Gateway Manual de usuario
2N Telekomunikace
2N Telekomunikace 2N StarGate Manual de usuario
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario
Telsey
Telsey CPVA 500 - SIP Manual de usuario
