Ellisys SerialTek Gen5 POD SSAS Manual de usuario

Gen5 POD U.2/U.3 Edition Assembly Reference

0004675 - R1

Page 1 of 6

CAUTION :

Failure to do the following may DAMAGE the interposer and VOID the warranty.

•Secure adapters as shown in this guide

•Do NOT change adapters while powered

•Do NOT hot plug

•Turn on interposer power BEFORE host power 8

Item Part Number Part Description Qty

1 4631 POD Main Unit 1

24687 EDSFF Device Adaptor Base Tray 1

3 4465 U.2/U.3 Adaptor Base Assembly 1

4 3736 M3x4mm Black Flat Head Screw 3

54688/4689 U.2/U.3 Device PCBA 1

6 4679 Host/Device Cable Adaptor Tray 1

7 3972 HCBL-EDSFF Support Tray 1

84690/4691 U.2/U.3 HSA 1

9 4061 Hook & Loop Cable Tie 1

Gen5 POD U.2/U.3 Edition Assembly Reference

0004675 - R1

Page 2 of 6

POD Main Unit

EDSFF Device Adaptor Base Tray

M3 Captive Panel Screw

Slide the EDSFF Device Adaptor Base Tray into the slot on

the DEVICE side on the underside of the POD Main Unit at an

angle of about 60~.

Rotate the EDSFF Device Adaptor Base Tray so it is

horizontal and tighten the M3 Captive Panel Screws to the

POD Main Unit, ensuring not to over tighten.

Gen5 POD U.2/U.3 Edition Assembly Reference

0004675 - R1

Page 3 of 6

Fix the U.2/U.3 Adaptor Base Assembly to the EDSFF Device Adaptor

Base Tray using three M3 x 4mm Flat Head screws

U.2/U.3 Adaptor Base Assembly

EDSFF Device Adaptor Base Tray

M3x4mm Flat Head Screw

POD Main Unit

Gen5 POD U.2/U.3 Edition Assembly Reference

0004675 - R1

Page 4 of 6

Raise M3 Captive Screws till it resists and screw thread clears the

underside of PCBA, then slide the U.2/U.3 Device PCBA into the

connector on the DEVICE side of the POD Unit and secure in position

on the U.2/U.3 Adaptor Base Assembly with M3 Captive Screws.

POD Main Unit

M3 Captive Screw

U.2/U.3 Device PCBA

EDSFF Device Adaptor Base Tray

U.2/U.3 Adaptor Base Assembly

Gen5 POD U.2/U.3 Edition Assembly Reference

0004675 - R1

Page 5 of 6

Slide the Host/Device Cable Adaptor Tray into the slot on the HOST side on

the underside of the POD Main Unit at an angle of about 60~.

Rotate the Cable Adaptor Tray so it is horizontal and tighten the M3 Captive

Panel Screws to the POD Main Unit, ensuring not to over tighten.

Host/Device Cable Adaptor Tray

POD Main Unit

M3 Captive Panel Screw

Gen5 POD U.2/U.3 Edition Assembly Reference

0004675 - R1

Page 6 of 6

Raise the Caps of the M3 Spring Loaded Screws and secure the

HCBL-EDSFF Support Tray in position on the Host/Device Cable

Adaptor Tray with the M3 Spring Loaded Screws

Ensure the U.2/U.3 HSA Cable is in the correct orientation,

TOP label facing upwards. Slide the cable onto the

HCBL-EDSFF Support Tray and connect to the HOST side of

the POD Main Unit aligning PINs A1/B1.

Secure in position with the Hook & Loop Cable Tie.

HCBL-EDSFF Support Tray

M3 Spring Loaded Screw

Device/Host Cable Adaptor Tray

POD Main Unit

Hook & Loop Cable Tie

PIN A1/B1 Position

U.2/U.3 HSA

Otros manuales para SerialTek Gen5 POD SSAS

Este manual sirve para los siguientes modelos

Otros manuales de Instrumento de medición de Ellisys

Ellisys

Ellisys USB Explorer 200 Manual de usuario

Ellisys

Ellisys 260 Manual de usuario

Ellisys

Ellisys USB Explorer 350 Manual de usuario

Ellisys

Ellisys USB Explorer 280 Manual de usuario

Ellisys

Ellisys SerialTek Gen5 POD SSAS Manual de usuario

Ellisys

Ellisys Vanguard Manual de usuario

Ellisys

Ellisys SerialTek Gen5 POD SSAS Manual de usuario

Ellisys

Ellisys Bluetooth Explorer 400 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario