Elite Screens YARD MASTER MANUAL SERIES Manual de usuario

Rev.050421BR www.elitescreens.com 1 | S\N: 203E +

Yard Master Electric 150” / Yard Master

Electric Tab-Tension Series

Outdoor Electric Movie Projector Screen

User’s Guide

Thank you for choosing the Yard Master Electric 150”/Yard Master Electric Tab-tension Series

projection screen! Please read through this user guide before utilizing the screen. Correct usage and

maintenance will ensure a long product life

Product Description:

The Yard Master Electric is an outdoor projector screen for wall and patio installations that brings media

room quality to your outdoor spaces. Its sleek aluminum casing beautifully accessorizes your backyard,

patio, pool deck or anywhere a gathering for evening movie time is appropriate.

Outdoor Projection Screen Disclaimer

Never leave your projection screen out and exposed to direct sunlight. Regardless of screen brand,

prolonged exposure to the sun’s ultraviolet radiation degrades the chemical bonds causing the material to

eventually decompose. Photodegradation first causes the material to lose its theater-grade reflective

qualities. Eventually nature will destroy even synthetic materials. For this reason, the Yard Master

Electric has a retractable design that allows the material to be drawn up into its protective casing to be

shielded from solar radiation.

Care & Use Instructions

◆Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the

points below to prevent that from occurring:

1. Do not touch the projection surface with your hands

2. Do not write or draw on the projection surface

3. Do not use fingers or sharp objects to point on the projection surface; this will damage the

screen material.

4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or

alcohol.

5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean

it.

◆To avoid damage and injury, the screen should only be operated by adults.

Rev.050421BR www.elitescreens.com 2 | S\N: 203E +

Understanding the Ingress Protection Rating IP33

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedures below.

•Please retain this user’s guide for future reference.

•To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the

manufacturer.

•Handle the unit carefully during transportation to avoid any damages.

•To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.

•The power outlet supplying power to the unit should be close to the unit and easily accessible.

•Do not install the unit on uneven or inclined surfaces.

•Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle.

•Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit.

•There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No

one except authorized technicians can open and make repairs to this unit.

•Make sure the power source this unit is connected to has a continuous power flow.

•If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid

overheat.

•Do not handle the power plug when your hands are wet or your feet are in contact with water.

Do not use this unit under the following circumstances.

•Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

•Avoid direct Sunshine, rain shower and moisture.

•Keep away from fire sources and high temperature to prevent this device from overheating.

•Cut off the power supply first before transportation or maintenance.

•Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be

done with any other electric household appliance.

•To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious

damage or if there are any evident broken parts.

Rev.050421BR www.elitescreens.com 3 | S\N: 203E +

WARNING

The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop in

the roller. Please be aware of this as it will void the limitation of your warranty.

Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please

contact Customer Service for any questions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur on a particular installation. If this equipment

causes harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures.

✓Reorient or relocate the receiving antenna of the device which may be causing the interference.

✓Increase the separation between the screen and the device’s receiver.

✓Connect the equipment into a different power outlet other than the device.

Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles

such as dust, sawdust, and/or liquids.

NOTE

Wall screws included with this product are complimentary and may not be adequate for all mounting surfaces.

Consult with a professional installer or hardware store for proper mounting screws and anchors.

Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling on the

viewing surface will not cause the casing to become loose or fall. The installer must ensure that the fasteners used

are of adequate strength and suitable for the installation location.

Hardware Parts List for Yard Master Electric Series

A. Wall/Ceiling mount

bracket x 2 pcs

B. M5x60 screw & dry-

wall anchor x 6pcs

C. M8x35 dry-wall

anchor & M4x35 Screw x

4pcs

D. Bracket connector x 2

pcs

(On the housing)

E. M5x11 Bolt Screw x

4pcs

(Screw on Part D)

G. Magnetic weight bar

bracket x 2pcs

H. M5x25MM round

head cross screws x

2pcs

I. M5x30MM eyebolt

screw & M5 nut x 2pcs

J. Snap link x 2pcs

K. Bubble leveler x 1pc

Rev.050421BR www.elitescreens.com 4 | S\N: 203E +

Installation Instructions

For installation assistance, please consult a professional Installer. Elite Screens’is not liable for faulty installations.

A. Wall Mount

Flush hidden mount (movable position)

This mount method allows the screen to slide horizontally.

1. Determine where the screen will be installed. Then, measure and mark the distance between the top and

bottom screw holes from each Wall/Ceiling mount bracket (A).

2. Drill a hole on all marked areas and install the brackets with the dry-wall anchor&M5x60 screw(B),

Make sure both brackets are properly leveled.

3. Hang the screen by placing the downward “catch” located on the back over the brackets upper “catch”.

4. After making sure the screen is secured, you can slide it left / right to properly center it in position.

5. Lastly, screw the M5x25mm screw (H) into the upper hole of the bracket to add additional support for

the screen.

Two or more people are required while one holds the screen in place.

B. Ceiling Mount

I. Ceiling Mount (movable position)

This mount method allows the screen to slide horizontally.

1. Determine where the screen will be installed. Then, measure and mark the distance between the top and

bottom screw holes from each Wall/Ceiling mount bracket (A).

2. Drill a hole on all marked areas and install the brackets with the dry-wall anchor&M5x60 screw (B),

Make sure both brackets are properly leveled.

3. Hang the screen by placing the downward “catch” located on the back over the brackets upper “catch”.

4. After making sure the screen is secured, you can slide it left / right to properly center it in position.

5. Lastly, screw the M5x25mm screw (H) into the upper hole of the bracket to add additional support for

the screen.

Two or more people are required while one holds the screen in place.

Front view of bracket (A)

M5x25MM round head

cross screws (H)

Side view of bracket (A)

Wall

Front view of

bracket (A)

Side view of

bracket (A)

M5x25MM

round head

cross screws (H)

Ceiling

Rev.050421BR www.elitescreens.com 5 | S\N: 203E +

II. Suspended

1. Screw the eyebolt (I) on the bracket connector (D).

2. Attach the snap link (J) through the eyebolt (I) and connect it to an eyebolt screw (not included) rated for

the screen’s weight.

Yard Master Electric Control System and Operation

Yard Master Electric Series Controls

A. RF Remote Control x1 pc (Battery built-in)

B. Wireless trigger x1pc

Screen operation

Electric Current: Depending upon region, your Elite Screen will operation 110v or 220v voltage.

1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet.

2. Once the screen has power, you’ll be able to control it using any of the 2 methods described below.

2 ways to control your Yard Master Electric Screen

1. RF Remote Control (Item A): The radio waves eliminate the need for a direct line of sight with a range of 100

feet.

Radio Frequency (RF) Remote Synchronization Instructions

1. Make sure the screen’s power cable is not plugged into a power outlet (If so, then unplug it).

2. Press and HOLD the UP button on the RF remote until you see the flashing light turn solid. (See diagram

above)

3. While holding the UP button, plug the screen’s power cable into the power outlet. The screen will drop

slightly (you may hear a beep) indicating it has entered pairing mode.

4. Release the UP button for 3 seconds, then press UP button again until you see the flashing light turn

solid (the screen will go up and down slightly).

5. You should now be able to control your electric screen with the RF remote control.

6. If unsuccessful repeat from Step 1.

Note: The beep(s) the screen produces are very faint. It may be difficult to hear, if more than 5 feet away from

the screen.

Ceiling

STOP

DOWN

Rev.050421BR www.elitescreens.com 6 | S\N: 203E +

Wireless trigger (Item B): The wireless trigger allows your screen to synchronize its drop/ rise operation with

the projector’s power cycle.

Wireless Trigger Set Up Instructions

A. Wireless trigger and Yard Master Electric projection screen set up [CODE] button:

1. Unplug the Power Cable attached to your motorized Elite Screen from the wall.

2. Connect the Projector’s Power Cable to the wireless trigger, then plug the cable into a nearby

power outlet.

3. Locate the [CODE] button on the back of the trigger, then, using a small pin, press and hold the

[CODE] button.

4. When you see the LED indicator light flashing rapidly, plug the screen’s power cord into a nearby

outlet. The screen will go up and down slightly. Release the [CODE] button at this point (you

may hear a beep sound from the screen).

5. Within 3 seconds after releasing the [CODE] button, press and hold the [CODE] button again until

you see the LED indicator light flashing rapidly (the screen will go up and down slightly), this

means the synchronization (pairing) process is successful.

6. If unsuccessful repeat from Step 1.

B. Wireless trigger and projector set up [SET] button:

1. Plug the wireless trigger’s IEC cable into the projector’s power receptacle.

2. Power ON the projector. The screen should drop automatically.

3. Locate the [SET] button on the back of the trigger, then (using a small pin) press and hold the

[SET] button for about 3 seconds until LED indicator light flashes and you hear a beep sound.

4. Turn off the projector within 10 seconds after the LED indicator light emits a flash and a beep.

5. At this step in the process, the trigger will record the running current of the projector when it is

turned off, and then the process is completed.

6. Power ON the projector. The screen should drop automatically.

7. Power OFF the projector. The screen should retract automatically.

8. If unsuccessful repeat from Step 1.

[CODE] Button

Note

➢When powering off the projector,

assure it is completely powered off

(ex, fan off), then the screen will

retract automatically

➢If the motorized screen does not

automatically drop or retract, repeat

the process from Step 1.

Projector

[SET] Button

[CODE] Button:

For programming the receiver

[SET] Button:

For setting the trigger feature

LED indicator light

AC power input

120VAC 60Hz

(Optional 220VAC 50Hz)

Back of wireless trigger

Rev.050421BR www.elitescreens.com 7 | S\N: 203E +

Magnetic bottom bracket Installation

1. After the screen is plugged in to a power outlet, press the

DOWN button on the RF remote control. Install

the magnetic bottom bracket (G) so that the

weight bar sleeve cradles inside (see illustration).

2. Mark the drill-hole area of where the bracket is to be installed with a Maker or Pencil.

3. Raise the screen UP using the RF remote control. Next, drill holes to insert the M8x35 Anchor (C) if

installing to a dry wall. Then affix the magnetic bottom bracket (G) on the marked location and secure it with

an M4x35 Screw (C).

4. Drop the screen DOWN using the RF remote see if the position of the magnetic bottom bracket (G) is correct

or not. Reposition the magnetic bottom bracket if needed.

For more information, support or your local Elite Screens contact,

please visit www.elitescreens.com

M8 x 35 Anchor

Wall

The magnetic

bottom bracket

M4x35 Screw

Note: The screen should deploy straight down and

align with the magnetic bottom bracket (G). Once the

weight bar is cradled inside the magnetic bracket, the

screen will be secured.

Otros manuales para YARD MASTER MANUAL SERIES

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios para proyectores de Elite Screens

Elite Screens

Elite Screens Spectrum Tab-Tension 2 CineGrey 3D Series Manual de usuario

Elite Screens

Elite Screens Yard Master OMS125WHT-BAT-ELEC Manual de usuario

Elite Screens

Elite Screens Ceiling Trim Kit for Home2 Series Manual de usuario

Elite Screens

Elite Screens CineTension2 Series Guía de referencia rápida

Elite Screens

Elite Screens Spectrum 2 Series Manual de usuario

Elite Screens

Elite Screens Aeon CineWhite A8K Series Manual de usuario

Elite Screens

Elite Screens EDGE FREE Aeon CineGrey 4D AT Series Manual de usuario

Elite Screens

Elite Screens ZSP-TR01 Manual de usuario

Elite Screens

Elite Screens ZHOMELB11-4 Manual de usuario

Elite Screens

Elite Screens Ceiling Trim Kit Manual de usuario

Elite Screens

Elite Screens VMAX2 (Plus) Series Guía

Elite Screens

Elite Screens PicoScreen Series Manual de usuario

Elite Screens

Elite Screens Cinema235 Series Manual de usuario

Elite Screens

Elite Screens OMS125HLITE Manual de usuario

Elite Screens

Elite Screens ezFrame 2 Series Guía de referencia rápida

Elite Screens

Elite Screens Spectrum Series Manual de usuario

Elite Screens

Elite Screens A56-E25B2 Manual de usuario

Elite Screens

Elite Screens Universal Mobile Stand Manual de usuario

Elite Screens

Elite Screens Osprey Tension Dual Series Manual de usuario

Elite Screens

Elite Screens VMAX110UWH2 E24 Manual de usuario

Elite Screens

Elite Screens A56-E25B Manual de usuario

Elite Screens

Elite Screens Tripod Tab-Tension CineGrey 5D Series Manual de usuario

Elite Screens

Elite Screens Designer Cut Series Manual de usuario

Elite Screens

Elite Screens SRM Pro Series Manual de usuario

Manuales populares de Accesorios para proyectores de otras marcas

Optoma

Optoma BX-AL133B Manual de usuario

PEERLESS

PEERLESS PE 1120 Guía

Osram

Osram SIRIUS HRI Series Manual

Presentation Switchers

Presentation Switchers PS111 Manual de usuario

Kramer

Kramer VIA GO Manual de usuario

Yamaha

Yamaha PJL-112 Manual de lista de piezas

Swedstyle

Swedstyle CL23AA02ZA25E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 236CB Manual del propietario

Epson

Epson BrightLink 475Wi Manual de usuario

Acer

Acer WP100 Manual de usuario

i3 i3board Manual de usuario

CHIEF

CHIEF HB-43E Manual de usuario

Biamp

Biamp Modena Hub Manual de servicio

NEC

NEC MP10RX Manual de usuario

Panamorph

Panamorph DCR-S3 Manual de usuario

Exact solutions

Exact solutions FRAME-EVO-P10 Manual de usuario

CHIEF

CHIEF VCM103S Manual de usuario

InFocus

InFocus LP70+ Guía