Elisa intuition Manual de usuario
Intuition™
Intuition™
Intuition™
Intuition™
Intuition™
UK
DE
FR
PL
NL
User Guide
Bedienungsanleitung
Guide d'utilisation
Gebruikershandleiding
Gebruikershandleiding
UK
Contents
2 Safety Information
3 The Intuition™ Controller
3 Get Smart Connected
4 Quick Start
5 Wake up and Language Display
6 Switching On and Off
7 Adjusting the Temperature
8 Adjusting the Flow
9 Selecting your Outlet
10 Adjustable Head
11 Fixed Head
12 Settings
14 Configuring your Outlets
15 Caring for your Shower
16 Shower Troubleshooting
20 Have you Registered?
20 Need Help?
Safety Information
This appliance can be used by children aged from 3 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without
supervision. For further information regarding the installation
of your product, refer to the Smart Shower Installation Guide.
Declaration of Conformity
Aqualisa Products Limited declares that the SmartValve and
supplied controller, in conjunction with pairing remotes and
diverter, complies with the essential requirements and other
relevant provisions of the Low Voltage Directive (2014/35/
EU), the EMC Directive (2014/30/EU) and the RED Directive
(2014/53/EU).
2
UK
10 Adjustable Head
11 Fixed Head
12 Settings
14 Configuring your Outlets
15 Caring for your Shower
16 Shower Troubleshooting
20 Have you Registered?
20 Need Help?
LEVER
Menu access
confirm a selection
BEZEL
Rotary
temperature
control
TOUCH SWITCH
On/Off
PROXIMITY
SENSOR
ACCENT
RINGDISPLAY
Intuition™ Controller
GET SMART CONNECTED
Unlock the potential of your shower; from water consumption analysis to
enhanced user functions. Keep up to date with latest features for the Aqualisa
app and voice activation by visiting the Aqualisa website.
Download and open the free Aqualisa app. If you have any trouble
downloading the Aqualisa app, check aqualisainternational.com/smartapp
for device compatibility.
SMART SPEAKER SETUP
Once the above has been completed go to the app for your smart speaker
and follow their instructions to add the shower to your devices.
3
UK
Quick Start
WAKE UP, POWER ON
AND POWER OFF
SHOWER ON
TEMPERATURE FLOW SELECT OUTLET*
Push and hold lever for over
3 seconds then release when
desired outlet icon appears.
Adjust during
showering only.
Adjust before or
during showering.
* Divert models only
You can prepare your temperature and outlet before you switch on the
shower, or adjust with ease while showering.
4
UK
The controller has a proximity sensor, so as you approach or move your hand
towards the controller, the display wakes up and is ready to go.
Wake-up
The proximity sensor detects
any object directly in front,
at approximately 0.5m
away from the controller.
0.5 metres
For information on languages available and how to reset the language display
on the controller, refer to separate literature supplied or visit
aqualisainternational.com
Language Display
5
UK
The controller features a secondary method to turn the shower off.
This is done using the lever: joggle the lever down until the flow is set
to ECO, then joggle the lever down three more times in succession.
39
Hello
Warming
39
Get
Ready
39
Push Lever
Your
shower was
9:20
Goodbye
Push lever
to power o
water turns off
Switching On and Off
ENDING YOUR SHOWER
Touch the power symbol for approximately 1 second, then push the lever
when prompted, to confirm and end the shower.
STARTING YOUR SHOWER
To activate the controller, use the proximity sensor, or touch the power symbol
until the screen wakes up, then push and release the lever to start the shower. The
Get Ready screen will appear on the display. After a moment the target
temperature will flash until it is reached. It will then display the thermostatically
controlled temperature.
water turns on
As a safety feature, the SmartValve has a maximum run time of 20
minutes. The flow can be stopped and started at any time by following
the instruction on this page.
This can be enhanced by activating and using the free Aqualisa app.
See pages 3 and 16 for details.
6
UK
TIP: This is your Home screen.
When in any of the Menu or
Settings screens, you can easily
return to the home screen by
turning the temperature bezel.
42 35
43
Warming Cooling
34
TEMPERATURE FEEDBACK DISPLAY*
Adjusting the Temperature
From the Home screen you
can adjust the temperature at
any time, before or during
showering, by turning the
bezel.
Turn clockwise to increase the
temperature. While the temperature
is adjusting the screen will flash
and the display will show
Warming. When the desired
temperature is reached, the display
will stop flashing.
Turn anti-clockwise to decrease
the temperature. While the
temperature is adjusting the
screen will flash and the display
will show Cooling. When the
desired temperature is reached,
the display will stop flashing.
* Very small changes in temperature may not result in Warming or Cooling messages
showing, only the temperature value will change.
7
UK
Emerency Stop: When the flow settin is at ECO, jole the lever
down 3 times in succession to turn the shower off.
Flow
MED MAX
Flow 39
FLOW FEEDBACK DISPLAY
After adjusting the flow, the display will return to the temperature Home
screen after a few seconds.
From the Home screen you
can adjust the flow during
showering, by moving the
lever left or right.*
*Flow cannot be adjusted when in Settings mode, or when the shower is awake and
not flowing.
Adjusting the Flow
Note: the change in flow will vary depending on the water system pressure
and the configuration of the pipework. For further information, refer to the
trouble shooting section and the Important Information section in the Smart
Shower Installation Guide.
8
UK
Drench
Shower
Push and hold for
over 3 seconds Release lever when
desired outlet icon appears
Selecting your Outlet Divert models only
From the Home screen, you can
alternate between outlets by
pushing and holding the lever
for over 3 seconds and releasing
when the desired outlet icon
appears. This can be done upon
starting the shower, or during
showering.
OUTLET ICONS
By default your controller
will show the Shower
icon as the primary outlet
and the Drench icon as
secondary. To change, go
to Settings menu,
Configure Outlets (page
14).
9
UK
Adjustable Head
To avoid water dripping from the shower head
after use, we advise to tilt the head back to allow
residual water to drain out.
The above recommendation applies to both
adjustable and fixed shower heads.
Rotate the spray plate lever clockwise or
anticlockwise to select the desired spray pattern.
To select the preferred height for the shower head,
squeeze the side levers together to allow the
handset holder to move up or down the rail.
Angular adjustment is made by carefully but firmly
pulling forwards or pushing back the shower head
against the ratchet in the holder.
Removing the shower head: with the hose still
attached, disengage the pivot clip by pushing
in the outer grey button located on the front of
the shower head (near to the hose connection).
Remove the spigot from the bottom of the handset
by using the hose to pull clear. To reattach: ensure
the hose washer is in the correct position, tighten
the threaded spigot into the hose using a suitable
spanner, taking care not to over-tighten. Reinsert
the spigot into the handset and engage the pivot
clip prior to placing the handset into the handset
holder.
Vita™ Head
3. Outer
2. Middle
1. Inner
10
Otros manuales para intuition
1
Tabla de contenidos
Idiomas:
Otros manuales de Accesorio de baño de Elisa
