Wireless Camera Triggering and Flash Unit Setup
(In case, the camera and the ash system are triggered wireless)
• The new EL-Skyport Universal Speed can be used to release the camera shutter of SLR cameras.
• To use this feature, optional, special camera trigger cables are required. Please nd more detailed and
actual information at http://elinchrom.com and search for EL-Skyport SPEED. Information for camera trig-
ger cables might be also available at Photo Dealers and Camera Manufacturers.
• Connect the camera and the EL-Skyport Universal SPEED Sync socket with the special optional trigger
cable.
• Please read as well the Camera Manuals how to setup the camera for this remote option.
• Select for example Group 1 and the Frequency Channel 1 for the Universal SPEED and the Transmit-
ter SPEED if the camera should work in a specic Group or Channel.
• Use a “second” EL-Skyport Transmitter SPEED and select another Group and Frequency Channel setting
to use with the ash system. The “second” Transmitter can be used with the Camera Hot-Shoe to trigger
the ash system. All “Receivers” for the ashes must have the same settings as the “second” Transmitter
SPEED
• Now push the test button of the Transmitters SPEED, (which was congured to trigger the camera), to
release the shutter and simultaneously the “second” Transmitter Speed (attached to the Hot-Shoe) triggers
the ashes.
Battery Mode:
• The status LED ashes once every 4 seconds in NORMAL SYNC MODE. If the Universal Speed is not used
for approximately 4 hours, the unit switches automatically to the Stand-By Mode.
• To awake from the Stand-By Mode, switch the Universal Receiver “ON” again.
Supply Mode:
• Connect the EL-Charger, for unlimited operation.
• If the EL-Skyport Receiver SPEED is used whilst charging (in Supply-Mode), the unit will not change to
Stand-By mode.
Reset to Manufactures Settings
In case the Universal Receiver SPEED does not work correctly, a RESET might solve the problem.
Close to the ON/OFF switch is a small hole. Press shortly, with a paper clip or similar, into this hole to active
the RESET switch.
6
