POWER ASSISTED BICYCLES
Welcome to the World of e.bike cycling.
Simply explained this is how your e.life bike basically works.
1. Switch the battery to ON, with the switch on the side left-hand side of the
frame, to the front of the bike.
2. Switch the power on by pressing the top left button on your controller on
the handlebars.
2.
the wheels of your bike.
3. After one complete turn of the pedal the electric motor kicks in making
pedaling much easier.
4. There are 9 setting on your controller on the handlebar, allowing you to set
the level of assistance you require.
For example: Riding up a hill you’ll probably use‘High’, mode.
5. Change the level of assistance you need at any time and as often as you wish.
6. The motor works to assist pedalling, stop pedalling and the motor stops too.
7. Applying the brakes cuts the motor
8. You can also choose to switch the assist OFF and ON on the controller at any
point in your journey. This helps to save battery power when its not needed.
should be able to obtain around 20 miles, before you need to re-charge your battery.
We Recommendthat you get used to your new e.life bike and the level of assit you place on it,
you’ll soon be able to work out how long a journey you can make and safely return under assist.
You can of course ride as you would a normal bike if the charge runs out.
Firstly may we congratulate
you on purchasing your new
electric power assisted e.bike.
Please take time to read your
manual. We have tried to write
it in a way that is simple and
easy to follow, whilst
explaining how your bike
works and how it is
maintained.
At any point if you feel you
need help we have a tehnical
helpline for support.
2
Please call our
Technical help line:
01702208187
(weekdays 9am-5pm)
(standard call rate charge applies)
(Fig.14)
(Fig.18)
(Fig.15)
(Fig.15)
