Eliet E450 Manual de usuario
E450
MANUAL
2
English
You will find information about the actual use and maintenance of the machine
in this manual. Read it carefully and keep it in a safe place.
Please also keep your purchasing invoice or the proof of receipt together with
this booklet.
Register your product online at www.eliet.eu.
© ELIET
Copyright 2009 ELIET. All rights reserved. All textual material, drawings, figures, diagrams, graphs, etc., included in this ELIET
booklet are protected by copyright and also by other intellectual property rights. Nothing from this information may be copied for
commercial goals or distributed and/or changed or reposted for other goals. Content has been included at specific places in this
ELIET manual of which the copyright is the exclusive property of their respective owners.
3
English
3
1. Introduction
1.1 Carefully read this user manual
ELIET machines are designed for safe and reliable use if they are operated in accordance with
the instructions given. Carefully read these operating instructions before using the machine.
Failure to observe this may result in personal injury or damage to the equipment.
1.2 Identification Data – ELIET Scarifier E450
Note the identification data relating to your machine in the boxed areas.
Stock no. :
Engine :
Serial number:
Year of Manufacture :
2. Warranty
2.1 Warranty card
To be eligible to obtain warranty you must mail the completed warranty card within one month of
the date of purchase to the address stated below.
European customers : US customers :
ELIET EUROPE NV ELIET USA Inc.
Diesveldstraat 2 3361 Stafford street (office B)
8553 Otegem 15204 Pittsburgh (PA)
Ph (+32)(0)56 77 70 88 - Fax (+32)(0)56 77 52 13
Ph (+001) 412 367 5185 - Fax (+001)412 774 1970
e-mail: service@eliet.eu, www.eliet.eu
e-mail: usinfo@elietusa.com, www.elietusa.com
Read the warranty conditions on the attached warranty card.
4
English
3. Welcome
Welcome to the family of ELIET users.
We would like to thank you for the confidence that you have placed in ELIET and we are con-
vinced that you have purchased the very best machine. The operating life of your ELIET machine
depends to a great extent on how you care for your machine. If you follow the instructions and
suggestions in these manuals, your ELIET machine will operate for a very long time in optimal
condition.
Read this instruction manual carefully before operating this machine. This will prevent you from
operating the device incorrectly. For your own safety, take into account the safety instructions
specified in the relevant chapter. Even if you are thoroughly familiar with operating such equip-
ment, it is still advisable to read these pages carefully.
At ELIET all our machines and devices are subjected to a policy of continuous change and there-
fore, the specification of your machine may differ slightly in terms of shape, technology and ac-
cessories. The descriptions and technical data in this manual are accurate at the time of printing.
Certain illustrations and descriptions may not be applicable to your specific machine, but instead
relate to a different version of the machine. In turn, we trust that you will understand that the
texts and illustrations in this manual cannot lead to any claims. If you still have any questions
after you have read this manual, please contact your ELIET dealer. Find an official ELIET dealer
near you at www.eliet.eu.
ELIET AT YOUR SERVICE
Diesveldstraat 2 Tel : (+32) (0)56 77 70 88
B-8553 Otegem Fax : (+32) (0)56 77 52 13
5
English
4. Table of contents
1. Introduction ..............................................................3
1.1 Carefully read this user manual ....................................................3
1.2 Identificationdata- Eliet scarifyer E450 .............................................3
2. Warranty ................................................................3
2.1 Warranty card ...................................................................3
3. Welcome .................................................................4
4. Table of contents ..........................................................5
5. Operator safety warnings ...................................................6
5.1 For your information .............................................................6
5.2 Caution ........................................................................6
5.3 Warning ........................................................................6
6. Main parts ...............................................................7
6.1 Overall view .....................................................................7
6.2 Engines ........................................................................8
7. Safety instructions ........................................................9
7.1 Safety messages .................................................................9
7.2 Safety precautions...............................................................11
7.3 Safety instructions..............................................................12
8. Dealer’s duties...........................................................16
8.1 Unpacking the machine..........................................................16
8.2 Positioning the handlebar .......................................................17
8.3 Assembling the collector unit ....................................................18
9. Operating instructions ....................................................20
9.1 Preliminary checkx............................................................. 20
9.2 Refeulling .....................................................................21
9.3 Preparing the work area.........................................................22
9.4 Starting the engine .............................................................23
9.5 Operating the machine......................................................... 25
9.6 Stopping the engine ........................................................... 28
9.7 After finishing the work ........................................................ 28
9.8 Lawn threathment after dethatching ............................................ 29
10. Transporting the machine .................................................30
11. Maintenance ............................................................31
11.1 General ........................................................................31
11.2 Maintenance shedule ...........................................................32
11.3 Lubricants.....................................................................33
11.4 Routine checks before each operation ............................................33
11.5 Maintenance after 20 hours of operation..........................................37
12. Storing the machine .....................................................47
13. Equipment specifications .................................................48
14. EC Declaration of Conformity ..............................................49
6
English
5. Operator safety warnings
A number of symbols (“For your information”, “Caution”, “Warning”) are used in this user manual
to provide additional information and to highlight dangers.
5.1 For your information
For your information :
This symbol is used to draw your attention to specific information and/or ac-
tions, or to denote where you can find additional information relating to the
subject.
5.2 Caution
Caution :
This notice identifies safe usage habits. This is done to prevent incorrect actions
that can result in personal injury or damage to the machine.
5.3 Warning
Warning :
This notice is used to warn you about extreme danger that you must be aware of
in these specific circumstances. Thus remain alert, in order to ensure your own
safety.
7
English
6. Main parts
To fully understand the content of this operator’s manual you need to be fully conversant with
the terminology used for the descriptions. In this chapter you can find a set of parts identified by
name. It is a good idea to take time to study the machine beforehand for an improved under-
standing of the descriptions provided in this user manual.
6.1 Overall view
1. Handlebar
2. Operation handle
3. Engine
4. Belt protection cover
5. Depth control buttons
6. Mud flap
7. Rotating knob for steering attachment
p
8
English
6.2 Engines
For your information:
All references to front, rear/back, left and right in this manual are from the
viewpoint of the operator standing behind the machine and facing the direction
the machine is travelling.
For your information:
Your ELIET dealer remains at your service for any maintenance or advice, ensu-
ring your ELIET machine is always in perfect condition. You can contact him for
original ELIET parts and lubricants at any time. These service parts are manu-
factured according to the same strict rules and craftsmanship as the original
equipment.
Caution:
For your own safety, only original parts may be mounted on ELIET machines.
1. Choke
2. Speed control
3. ON/OFF switch
4. Oil filler cap/dipstick
5. Oil drain plug
6. Fuel tap
7. Exhaust
8. Air filter
9. Fuel filler cap
10. Condenser
11. Overflow protection device
Honda GC160Honda GX160
1
2
9
4
5
3
8
98
4
5
3
9
English
7. Safety instructions
7.1 Safety messages
This sticker is affixed on the belt protection cover and
warns about the danger of hand injuries. Keep your hands
and feet away from underneath the machine as long as
the blades are rotating. The engine must be turned off in
case of faulty operation or before starting maintenance.
Art nr : BQ 505 010 070
This sticker is affixed on the machine near the engine.
This sticker provides a summary of the general safety
regulations by using icons:
1. Before operating the machine the manual should be
read and understood.
2. Suitable safety clothing (gloves, safety goggles, ear
defenders) should be worn when operating the machine.
3. Working with or performing maintenance on the ma-
chine poses the risk of slicing wounds to the hands.
Be attentive and cautious.
Art nr : BQ 505 010 050
This sticker is affixed on the machine near the engine.
The sticker reminds the user to switch off the engine and
remove the spark plug cover before carrying out main-
tenance work on the machine.
Art nr : BQ 505 010 040
10
English
This sticker is affixed near the exhaust and warns the
operator about hot surfaces with a high risk of burns.
Art nr : BQ 505 010 060
This sticker is affixed next to the engine. It reminds the
operator to keep bystanders at a distance while operating
the machine.
Art nr : BQ 505 010 150
This sticker is affixed on the cover of the driving belt. It
indicates the potential danger arising when the cover is
removed while the engine is running. The machine may
never be operated without the cover. The engine must be
switched off before removing the cover at all times.
Art nr : BQ 505 010 130
This unique sticker contains all machine identification
data:
• Year of manufacture
• Model
• Type number
• Serial number
• Capacity
• Weight
• Guaranteed A-weighted noise level
In addition, the sticker bears the manufacturer’s company
information. The sticker bears the seal of conformity with
European standards in the form of a CE label.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cortacésped de Eliet
Manuales populares de Cortacésped de otras marcas
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manual de usuario
DEWEZE
DEWEZE ATM-725 Manual de operación
Weed Eater
Weed Eater 180083 Manual de usuario
Husqvarna
Husqvarna Poulan Pro PP185A42 Manual de usuario
Better Outdoor Products
Better Outdoor Products Quick Series Manual de usuario
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manual de funcionamiento
