Elettrotest TPS/M 1500 Manual de usuario

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 1

TPS/M 1500-9000VA

USER MANUAL

Clicca qui per vedere il manuale in versione Italiana.

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 2

TPS/M Models covered in this manual:

Model

Code

TPS/M 1500

99111103

TPS/M 3000

99111253

TPS/M 6000

99111503

TPS/M 9000

99111653

This manual is written from TPS/M firmware version TPSX 09_.

Please check the latest manual version at www.elettrotestspa.it

To consult older manual versions, please contact our support at

[email protected]

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 3

Document list:

This manual is completed by a list of documents, useful to understand all the features of your

TPS/M.

Scan the QR-code or click on the link to directly download the documents.

Documents

Description

Link

QR-code

User Manual

Latest manual version

Manual

Brochure

Brochure for all the TPS-HPS-CPS models

Brochure

TPS Parameters

Describes all the machine modifiable

parameters and the start-up sequence.

TPS

Parameters

TPS protocol

Elettrotest

Describes how the Elettrotest remote

communication protocol works.

Elettrotest

Protocol

TPS protocol

SCPI

Describes how the SCPI remote

communication protocol works with your

TPS/M.

SCPI

Protocol

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 4

Documents

Description

Link

QR-code

PS Interface

Software for remote use.

PS_interface

Driver LabView

Manual and LabView Drivers for PS-

interface

Driver

LabView

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 5

Elettrotest Spa

P,zza R.Riello 20/B

45021 Badia Polesine (RO)

Italy

+39 042553567

www.elettrotestspa.it

After sale support

[email protected]

Thank you for purchasing the TPS/M generator.

TPS/M/M is an high performance variable voltage generator (amplitude and frequency) in order to

simulate and electrical line for test for different application (laboratory, test line, production line)

Responsability:

Elettrotest disclaims any responsibility for damage to people or things

caused by an improper use of its products.

Mandatory

-Verify voltage, power and frequency compatibility between TPS/M range and electrical

specification of equipment under test (EUT).

-Electrical components of the system must be suitable for the rated voltage and current of

TPS/M model (paragraph 1.2)

-The electrical components, which by construction cannot support external influences (of

the generator in all its range), can only be used on condition that adequate additional

protection has been provided with automatic disconnection protection.

Notes:

This manual lists precautions and information about operating procedure of device.

The content of this manual is subject to change without prior notice because of continuing

improvements on the instrument’s

Should you have any questions or find any error please contact us by email.

Copying or reproducing all or any part of the contents of this document is strictly

prohibited, without Elettrotest permission

Version:

This manual is written for TPS/M firmware version TPSX 09_ and higher.

To consult older manual versions, please contact our support at [email protected]

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 6

SAFETY WARNINGS

The manufacturer urges users to read the user manual for our products before installation.

The installation must be carried out by qualified technical staff. The non-observance of the

warnings in this manual can cause electric shocks, even fatal ones.

Please find some general safety warnings below.

•This equipment must be connected to the mains supply using the appropriate safety

devices.

•TPS/M must be connected to safety ground through the correct connections. The non-

observance or the degradation of this earth connection can lead to electric shocks, even

fatal ones. As regards the correct connection modes, please refer to the information

contained in paragraph 4.

•Disconnect TPS/M from the mains before any work on the equipment and on the

connected power loads.

•Before touching the load or the output connector make sure that the power supply on the

device has been disconnected for at least 5 minutes. This is the time necessary in order for

the capacitors inside the device to discharge. The non-observance of this discharge time

can lead to electric shocks, even fatal ones.

•Avoid heavy shocks to the equipment (especially during transport) or exposure to extreme

weather conditions.

•Any damage to the product due to transportation, incorrect installation or improper use is

not covered by the guarantee supplied by the manufacturer.

•Do not use the equipment in explosive environments or in the presence of dust, acids or

corrosive and/or inflammable gases.

•Tampering with or dismantling any component in the equipment will void the warranty

automatically.

•Do not operate or store under conditions where condensing may occur or where

conductive debris may enter in the case.

•Keep the ventilation holes on the front and rear free from obstruction.

•Do not make dielectric strengths test on the input or output of the equipment. Contact

Elettrotest if you need to do specific test

ELECTRIC RISK

There are dangerous voltages inside TPS/M and over the output connector.

The non-observance of the warnings suggest in this manual can lead to electric

shocks, even fatal ones.

OVERHEATING RISK

In the case of a ventilation system failure, the metal parts of the inverter may reach

high temperatures (in some cases higher than 70°C).

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 7

DISPOSAL

INFORMATION FOR USERS ON THE CORRECT HANDLING OF WASTE

ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

In reference to European Union directive 2012/19/EU issued on 24 July 2012 and the related

national legislation, please note that:

•WEEE cannot be disposed of as municipal waste and such waste must be collected and

disposed of separately;

•the public or private waste collection systems defined by local legislation must be used. In

addition, the equipment can be returned to the manufacturer at the end of its working life

when buying new equipment;

•the equipment may contain hazardous substances: the improper use or incorrect disposal

of such may have negative effects on human health and on the environment;

•the symbol (crossed-out wheeled bin) shown on the product or on the packaging and on

the instruction sheet indicates that the equipment must be disposed of separately;

•in the event of illegal disposal of electrical and electronic waste, the penalties are specified

by local waste disposal legislation.

 
01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 8 
 
 
INDEX 
 
INTRODUCTION..........................................................................................................................10 
1. MAIN FEATURES ..................................................................................................................10 
1.1. Output voltage .............................................................................................................10 
1.2. Output frequency.........................................................................................................10 
1.3. User interface...............................................................................................................11 
2. MODELS...............................................................................................................................12 
3. TECHNICAL SPECIFICATIONS ...............................................................................................13 
3.1. Limitation current ........................................................................................................13 
4. MECHANICAL DRAWINGS....................................................................................................14 
4.1. TPS/M 1500 | TPS/M 3000.........................................................................................14 
4.2. TPS/M 6000..................................................................................................................15 
4.3. TPS/M 9000..................................................................................................................16 
NOTES FOR USERS......................................................................................................................17 
1. Switching ON .......................................................................................................................17 
2. PARAMETERS PROGRAMMING MODE................................................................................17 
3. VOLTAGE MENU ..................................................................................................................17 
3.1. Setting Voltage.............................................................................................................17 
4. RANGE SETTING...................................................................................................................18 
5. VOLTAGE VISUALIZATION....................................................................................................19 
6. FREQUENCY MENU..............................................................................................................20 
6.1. Frequency setting.........................................................................................................20 
6.2. Frequency reference setting........................................................................................20 
7. MODE MENU.......................................................................................................................21 
7.1. Voltage reaction...........................................................................................................21 
8. ALARMS ...............................................................................................................................22 
8.1. Loading alarms .............................................................................................................23 
8.2. System alarms..............................................................................................................23 
8.3. Current alarm...............................................................................................................23 
8.4. Voltage alarm...............................................................................................................23 
INSTALLATION............................................................................................................................24 
1. GENERAL NOTES..................................................................................................................24 
1.1. INSPECTION..................................................................................................................24 
2. POWER CABLING .................................................................................................................25 
2.1. TPS/M 1500..................................................................................................................25 
2.2. TPS/M 3000..................................................................................................................26 
2.3. TPS/M 6000..................................................................................................................27 
2.4. TPS/M 9000..................................................................................................................28 
3. PROTECTION DEVICE ...........................................................................................................30 
3.1. GENERAL DIAGRAM .....................................................................................................30 
3.2. RCD PROTECTION.........................................................................................................30 
3.3. MAGNETO-THERMAL PROTECTION.............................................................................31 
3.4. LINE FUSES ...................................................................................................................31 
3.5. INTERNAL FUSES TPS/M 1000......................................................................................31 
3.6. INTERNAL FUSES TPS/M 3000......................................................................................31 
3.7. INTERNAL FUSES TPS/M 6000.....................................................................................31 
3.8. INTERNAL FUSES TPS/M 9000......................................................................................32 

 
01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 9 
3.9. ACCESSORY TPS/M 1000..............................................................................................32 
3.10. ACCESSORY TPS/M 3000 ..........................................................................................32 
3.11. ACCESSORY TPS/M 6000 ..........................................................................................33 
3.12. ACCESSORY TPS/M 9000 ..........................................................................................33 
4. WIRING DIAGRAM...............................................................................................................34 
4.1. 2 WIRE CONFIGURATION .............................................................................................34 
4.2. 4 WIRE CONFIGURATION .............................................................................................35 
REMOTE CONTROL.....................................................................................................................36 
1. Control software..................................................................................................................36 
2. RS232 serial cable................................................................................................................36 
3. EXISTENCE TABLE.................................................................................................................36 
SERVICE AND MAINTENANCE ....................................................................................................37 
1. MAINTENANCE / CLEANING................................................................................................37 
1.1. Scheduled maintenance...............................................................................................37 
2. ALARMS DIAGNOSIS AND REPAIRS .....................................................................................37 
3. BASIC TROUBLESHOOTING..................................................................................................38 
3.1. Overvoltage/Undervoltage alarms ..............................................................................38 
3.2. Overtemperature alarms .............................................................................................38 
3.3. Inverter alarm ..............................................................................................................39 
3.4. Max DV OUT alarm.......................................................................................................39 
3.5. Limit IOUT alarm ..........................................................................................................39 
GUARANTEE ...............................................................................................................................40 
REVISION INDEX .........................................................................................................................40 
 
 

01/02/22 62000440_08_User Manual TPS/M 1500-9000VA 10

1. INTRODUCTION

TPS/M is a power source that supplies sinusoidal stable voltage. Its output voltage is adjustable in

frequency, amplitude and phase.

1.1. MAIN FEATURES

1.1.1. Output voltage

The output voltage is guaranteed perfectly sinusoidal, with a distortion of less than 0.3%

regardless of the load. The value of output voltage is kept perfectly stable within 0.1% with linear

load and a full load.

It’s designed for harmonics and flicker test. It meets the corresponding specifications as per EN

61000-3-2 and EN 61000-3-3.

The load that TPS/M is able to drive can vary from a pure capacity to a pure inductance.

The output voltage is adjustable with continuity from zero to full scale.

TPS/M can in fact provide the nominal power at various full scales and this allows the TPS/M to

adapt himself to the disparate needs of the user, without having heavy limitations on the output

current.

Furthermore TPS/M is capable to keep the voltage stable also with time variable loads, as for

example the pulsating loads. In fact TPS/M recovers the distortion of the waveform within 0.3 %

with linear load and the amplitude of the voltage within 0.1% in less than half period.

TPS/M can bear a short circuit for an indefinite time without suffering any consequence.

1.1.2. Output frequency

In AC configuration TPS/M allows the regulation of the output frequency from 10 to 80Hz at

maximum voltage.

This output frequency can be regulated with continuity within the above-mentioned range of

frequencies and it has a stability of 0.01% with respect to the set frequency.

TPS/M also allows to synchronize the output frequency with the frequency of the supply line; this

synchronization is obtained both in frequency and in phase with the line.

This allows a completely synchronous output with regard to the supply line.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Fuente de alimentación de Elettrotest

Elettrotest

Elettrotest TPS/M/D Manual de usuario

Elettrotest

Elettrotest CPS/M 1000VA Manual de usuario

Elettrotest

Elettrotest CPS/T Series Manual de usuario

Elettrotest

Elettrotest HPS/T Manual de usuario

Elettrotest

Elettrotest RPS/T 20kVA Manual de usuario

Elettrotest

Elettrotest TPS/T 10kVA Manual de usuario

Manuales populares de Fuente de alimentación de otras marcas

Monacor

Monacor PS-12CCD Manual de usuario

VOLTIMA

VOLTIMA MagicBox 15 Manual de usuario

Agilent Technologies

Agilent Technologies 6032A Manual de usuario

Miller

Miller Auto Deltaweld 452 Manual de usuario

BCP

BCP PUOUBK Hoja de instrucciones

HC 2210 Manual de usuario

Puls

Puls CT5.241 Manual de usuario

OCZ

OCZ ZX1250W Manual de usuario

iseg

iseg ECH 238 Manual de usuario

Power

Power XXL A Series Manual de usuario

Agilent Technologies

Agilent Technologies 6631B Manual de usuario

Renogy

Renogy PHOENIX 300 Manual de usuario

HP 6200B Manual de servicio

Epson

Epson Stylus Scan 2500 Manual de funcionamiento

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manual de usuario

Puls

Puls MiniLine ML50.100 Manual de usuario

Puls

Puls AS-Interface SLA4.100 Manual de usuario

Kenwood

Kenwood PS-60 Manual de usuario