Element ELE9096 Manual de usuario
4K x 2K HDMI 10x10 Matrix Switch
ELE9096 USER MANUAL
1.0 INTRODUCTION
ELE9096 10x10 HDMI Matrix Switch allows you to route 10 HD sources to any 10 HD
displays! The 10x10 HDMI Matrix switch is a complete HD routing solution for whole home
HDTV systems. It provides 3D support, UltraHD 4K2K, and is 2U Rack mountable for
professional installations. In addition, the ELE9096 allows for effortless control of up to 10
devices through Ethernet control, Android/IOS App Control, IR remote control, RS-232 and
the front panel.
1.1 FEATURES
1. Connect up to 10 HDMI sources to 10 x HDMI display monitors.
2. HDMI 1.4 with 3D, HDCP & DVI Compliant.
3. High definition video up to 4K2K@24/25/30Hz@8bits, 1080p@60Hz@12bits.
4. Audio supports up to LPCM 7.1 @ 192KHz / Dolby TrueHD / DTS-HD MA
5. Easy to use front panel control of switching or using the included remote control.
6. Built in Ethernet Control and Android/iOS APP Control.
7. Built in RS232 console port to select input/output.
8. Input/Output status can be displayed at front panel LCM & LED.
page 1
2.1 PANEL VIEW
page 2
2.0 FEATURE SETUP DIAGRAM
BD
TV
TV
HDMIHDMI
RS232
PC
ELE9096
Set-top Box
Media Player
Projector
Home Theater
Game Console
3.0 KEYPAD AND LEDS
page 3
Back Panel LED Indication
POWER Light On Power On
Light Off Power Off
RJ45 Yellow Ethernet Linked
Green Ethernet Data Transmission
Front Panel LED Indication
ON Blue Power on
Red Standby
Off Power off
INPUT 1~10 Blue Signal indication
Off No signal
OUTPUT 1~10 Blue HDMI output indication
Off Output unlink
Front Button
POWER Power on/standby
UP Up
DOWN Down
LEFT Left
RIGHT Right
ENTER Select confirm key
MENU Back to main menu/channel setting
EDID Copy EDID
LOCK Button lock
ALL Set selected input channel to all output (When pressing ALL the
second line of the panel will show IN and the flashing, select the
input 1~10 then press ENTER)
OFF Turn off selected output, could be 1~10 or ALL (When pressing OFF
the second line of panel will show IN and flashing, select the input
1~10 or ALL then press ENTER)
OUTPUT 1~10 Fast switch output
INPUT 1~10 Fast switch input
3.1 PANEL BUTTON FUNCTION
page 4
Output 1~10 & Input 1~10
Press OUTPUT 1~10 to select output port then the input at IN line of LCM will blink,
press INPUT 1~10 to select input port to switch the channel.
All
Press ALL button, the IN line of LCM will blink, press INPUT 1~10 to select input port
to all output port.
Off
Press OFF button, the IN line of LCM will blink, press ALL or OUTPUT 1~10 to select
which port to turn off.
EDID
Press EDID button, it will show “From OUTPUT” at second line of LCM and the
channel number will blink, press OUTPUT 1~10 to select which port to copy EDID.
Lock
Press LOCK till LOCK LED on then the panel button and IR remote control of MATRIX
will be locked. Press LOCK till LOCK LED off to unlock.
*When the sub-menu setting is changed, press the ENTER key to complete the
setting. If not press ENTER key, then the setting will cancel.
10X10 HDMI MATRIX
3.2 LCM PANEL FUNCTION
Power on Main Screen
When the power is on and the main screen appears.
page 5
OUT 12345678910
IN 12345678910
Channel Setting on Main Screen
The Matrix will jump to channel setting screen after 10 seconds, press the MENU key
to enter the main menu.
Operation
1. Press UP or DOWN key to move * to select an item for setting and press ENTER key to
enter into subpage.
2. In MENU you could use key 1~6 of IR remote control to select the functions.
3. When the selected sub-page setting is completed, press the MENU button to return to
the main page.
Main Menu Options
1. Switch
2. Scene
3. Ethernet
4. EDID
5. Remote ID
6. Version
*
4.0 LCM MAIN MENU FUNCTION OPERATIONS
4.1 SWITCH: (DEFAULT: 1 2 3 4 5 6 7 8 9 10)
This function is used to switch the input/output port. Enter the SWITCH menu. Press
the ENTER key, then the LCM second line INPUT will flash. Press LEFT or RIGHT
button to select the output to be modified. Then press Up or Down button to select the
input port. After that, press ENTER to confirm setting.
page 6
4.2 SCENE
SCENE function provides 10 sets of channel setting to fast reload for different
application.
Load
Reload saved scene, press UP or DOWN to select the number of setting, ENTER to
load. At main screen you could use IR01 remote button A for quick load function,
button 1~0 to select port number to load.
Save
Save current channel setting, press UP or DOWN to select the number and ENTER to
save. At main screen you could use IR01 remote button B for quick save function,
button 1~0 to select port number to save.
It also works with INPUT/OUTPUT button of the panel or IR remote
LOAD
SAVE
LOAD 1
123456789
SAVE 1
OUT 12345678910
IN 12345678910
IP Address
192.168.0.10
Subnet Mask
255.255.255.0
IP Address: (Default: 192.168.0.10)
This function can setup MATRIX host intranet ”IP Address”, press ENTER, the left-most
number of second row will flash, then press the UP or DOWN button to change the
numbers, , press LEFT or RIGHT to move to another location, the move to a position
number will flash, press ENTER to complete the setting.
page 7
Subnet Mask: (Default 255.255.255.0)
This function can setup the MATRIX host intranet “Subnet Mask”, press ENTER, the
left-most number of second row will flash, then press the UP or DOWN button to
change the numbers Press ENTER, , press LEFT or RIGHT to move to another location,
the move to a position number will flash, press ENTER to complete the setting.
Gateway
192.168.0.1
Gateway: (Default 192.168.0.1)
This function can setup the MATRIX host intranet “Gateway”, press ENTER, the
left-most number of second row will flash, then press the UP or DOWN button to
change the numbers Press ENTER, , press LEFT or RIGHT to move to another location,
the move to a position number will flash, press ENTER to complete the setting.
4.3 ETHERNET
This section allows you to set an IP Address, Subnet Mask, Gateway, DHCP Client, Media
Type and MAC Filter when controlling the matrix from a remote computer.
DHCP Client: (Default Disable)
When DHCP Clients is set to “Enable”, the MATRIX host will automatically get IP
Address, Subnet Mask, Gateway, if set at “Disable”, the MATRIX Host IP Address
needs to go through “ ETHERNET” menu to set IP Address, Subnet Mask, Gateway, to
press ENTER, the second row will flash, then press the UP or DOWN to select
DISABLE, ENABLE, then press ENTER to complete the setting.
DHCP Client
Disable
page 8
Media Type: (Default Auto)
This function will setup the MATRIX host intranet “Media Type, press ENTER, the
second row will flash, then press the UP or DOWN button to select AUTO,10MHalf,
10MFull,100MHalf,100MFull, then press ENTER to complete the setting.
Media Type
Auto
MAC Filter: (Default Disable)
MAC Filter can be setup with a registered MAC Address in order to connect the
MATRIX host Web UI, MAC Address required by the Web page to fill in, this function
can only be setup at “DISABLE”, “ENABLE”, then to press the ENTER, the second row
will flash, then press the UP or DOWN to select DISABLE, ENABLE, then press ENTER
to complete the setting.
MAC Filter
Disable
4.4 EDID: (DEFAULT: 1080P LPCM-2CH)
Because the player output display resolution will be based on TV EDID, this Matrix provides
four default EDID modes:” BUILD-IN MODE”, “COPY MODE”, “I. EDID MODE” and
“PC EDID MODE”.
page 9
Build-In Mode
This mode supports video resolution 480p, 720p, 1080i / p at 24/50/60Hz, and
supports 1080P LPCM two-channel audio and 5.1 channel. After entering the
BUILD-IN MODE menu, press UP or DOWN key to select 1080P LPCM-2CH or 1080P
LPCM-5.1CH, then press ENTER to confirm setting.
For 4K2K resolution you have to copy the EDID from your 4K2K monitor
1080P LPCM-2CH
1080P LPCM-5.1CH
BUILD-IN MODE
COPY MODE
I. EDID MODE
PC EDID MODE
Tabla de contenidos
Otros manuales de Cambiar de Element
