
Electronic Research Group +27 11 314-1632 www.erg.co.za
Controls
In the normal mode the Actual Stage Temperature is displayed.
When the push button marked Display / Stage is pushed, the
required temperature is displayed and can be adjusted by turning the
screw slot marked Adjust / Stage.
When the push button marked Display / Alarm is pushed, the alarm
temperature is displayed and can be adjusted by turning the screw
slot marked Adjust / Alarm.
The audible alarm function may be turned On or Off by the switch
marked Alarm / On/Off.
Setting-up
Turn the Power Switch to On. The switch knob will light to indicate
when power is turned on.
Push and hold the Display / Stage push button. Turn the Adjust /
Stage screw slot to select the desired temperature.
Push and hold the Display / Alarm push button. Turn the Adjust /
Alarm screw slot to select the same temperature set for the stage.
Turn the Alarm Switch to On.