Electrolux AEG BS8304021M Manual de usuario

Technical Support - BSP 1/27 599 73 44-69 Rev. 00

SERVICE MANUAL

COOKING

Built-in Ovens

Cookers

“VCU”

User Interface

Customer Care - EMEA

Training and Operations Support

Technical Support

Publication

number

599 73 44-69

Edition: 03/2015 - Rev. 00

Technical Support - BSP 2/27 599 73 44-69 Rev. 00

Technical Support - BSP 3/27 599 73 44-69 Rev. 00

Table of Content

1. INTRODUCTION ................................................................................................................................... 4

2. OVERVIEW............................................................................................................................................. 6

3. CONCETP................................................................................................................................................ 8

4. “VISION VCU” AND TOUCH BOARD FIXING ............................................................................... 8

5. MODULAR CONSTRUCTION........................................................................................................... 10

6. ELECTRICAL CONNECTIONS........................................................................................................ 11

7. MATCHING THE POWER BOARD.................................................................................................. 11

8. CONTROL PANEL............................................................................................................................... 11

9. FUNCTIONS AND USE OF VISION VCU INTERFACE................................................................ 18

10. DEMO MODE ....................................................................................................................................... 20

11. SERVICE MODE (FACTORY TEST)................................................................................................ 20

12. ALARM CODE...................................................................................................................................... 23

13. SIDEKICK............................................................................................................................................. 27

14. REVISIONS:.......................................................................................................................................... 27

Technical Support - BSP 4/27 599 73 44-69 Rev. 00

1. INTRODUCTION

1.1 PURPOSE OF THIS MANUAL

The purpose of this Manual is to provide information of new User Interface board OMEGA.

1.2 WARNINGS

All work with open appliances must be done with the mains supply disconnected.

The intervention on electrical equipment should only be performed by qualified

personnel.

Before working on a device, check the efficiency of the system housing through means of

appropriate equipment. As an example, refer to the indications described / illustrated in

the portal Electrolux Learning Gateway (http://electrolux.edvantage.net).

After intervention, carry out electrical safety tests and check the correct

operation of all safety devices.

In the case of manipulation / replacement of the PCB, use the ESD kit (Code 405 50 63-

95/4) to prevent electrostatic discharge damage the circuit board see SB No. 599 72 08-09

Technical Support - BSP 5/27 599 73 44-69 Rev. 00

1.3 ABBREVIATIONS, ACRONYMS, DEFINITIONS

Abbreviations

Meaning

ABO

Automatically back to OFF_STATE from STAND_BY_STATE

Assisted Cooking

Basic Settings

COT

Current Oven Temperature (= actual temp. in cavity)

Customer Action

Press any key, open the door (if door switch for light), plug in /out food probe

Language = German

DUR

Duration

Food Category

FCT

Food Probe Current Temperature

FPE

Food Probe Extended

FST

Foot Set Temperature

H+H

HEAT+HOLD

KEY_U/D

Key for up/down-selection

LTC

Low Temperature Cooking

MAN

Manuel in Assisted Cooking

MEM

My Programs menu

Minute Minder

Food probe

OFF

Off-State

On-State

OST

Oven Set Temperature

OUI

Oven User Interface

OVF

Oven Function

RTC

Real Time Clock

REC

Recipe

S+G

SET+GO

STB

Stand-By-State

ToD

Time of Day

Window

OCT

Oven current temperature

ON_STATE

Oven is running

STAND_BY_STATE

Oven is in standby with standard menu

OFF_STATE

Oven is Off, ToD indication

tbd

to be defined

Technical Support - BSP 6/27 599 73 44-69 Rev. 00

2. OVERVIEW

The VISION VCU interface is a new high end oven user interface for the cooking appliance.

VISION VCU replacing Avantgarde and ENV06 Smart Culisense.

The user interface concept based on todays Vision ENV06

Construction with one PCB, the same for OMEGA and VISION (VCU)

1. CONNECTION PCB

2. VISION (VCU) DISPLAY

ENV06 Smart Culisense

Avantgarde

VCU

Vision Cooking Update

Technical Support - BSP 7/27 599 73 44-69 Rev. 00

2.1 RANGE OF APPLICATION AND SPECIFIC FEATURES

There are several variants of ovens and cookers with Vision VCU interface in various structures, combined

with the power board OVC3000 in different aesthetic and brands with the following features:

•Pyro

•Non-Pyro

•Catalytic

•Meat Probe

•Steam

•Microwave

The main features of the Vision VCU interface are:

Full Dot Matrix Display

LCD Modul

same µC family (Renesas) for all interfaces Omega and Vision VCU

flexibility with different glass designs (new designs can be realized very fast)

supports nonPyro, Pyro appliances

supports Steam functionality

supports MW functionality

supports double oven appliance

support 10 digital Inputs for touch sensor fields

2.2 DIFFERENT VERSIONS

RED VERSION (AEG)

White VERSION (ELECTROLUX)

NOTE: The different Hardware versions of Vision VCU Interface through the various software give rise to

different codes programmed interface adapted to the different types and functions of the oven

Technical Support - BSP 8/27 599 73 44-69 Rev. 00

3. CONCETP

All glass variants should be adapted to this PCB.

same connection PCB <-> glass

same connection PCB <-> LCD module

same position

1. FUTURE DESIGN DISPLAY

2. VISION VCU DISPLAY

3. OMEGA DISPLAY

4. CONNECTION PCB (BASIS PCB)

4. “VISION VCU” AND TOUCH BOARD FIXING

The touch-zones-board is connected over the connector only. No additional wiring is needed.

4.1 “VISION VCU” - 7 TOUCH ZONES

Touch-7-zones-board

Attention ! Please be careful, during disassembling and assembling the boards !

NOTE: For the fixing system in the various applications and aesthetic refer to manuals Service relating

(Apollo structure, Sputnik structure etc. ).

Connector

Basic board

User interface

Basic board with display

Panel

Glass

Touch-zones-board

Reflector

Frame support

Shuttle

Technical Support - BSP 9/27 599 73 44-69 Rev. 00

4.2 “VISION VCU” - 10 TOUCH ZONES

Touch-10-zones-board

4.3 CONNECTORS OF BASIS PCB

Glass

Panel

Frame support

(Glued to the glass)

Frame support

User interface

Basic board

User interface

Display

Touch-zones-board

OMEGA

LCD module

serial

VISION (update)

LCD module

parallel

new

???

Programming

connector

Background

debug

ext.Flash

progr.

LCD connector

Basis

PCB

Imput

connector

2xJST

2x8

Imput zones

Digital rotary bit

encoder

illuminated

bar

Communication connector

Service connector

3pin ???

SMART backlight

connector

MACS

communication

SIDEKICK

for Service

Power Board

OVC2000 or OVC3000

xxx = only Vision

xxx = backwanrd compatible

Touch Board (max 10 zones)

bit encoder (max 7 zones)

+ SMART backlight

4 Pin Edge

3 Pin Edge

Technical Support - BSP 10/27 599 73 44-69 Rev. 00

4.4 NEEDED CONNECTOR FOR “VISION VCU”

5. MODULAR CONSTRUCTION

The touch-zones-board is connected over the connector only. No additional wiring is needed.

ATTENTION: Please be careful, during disassembling and assembling the boards !

CONNECTOR (TOUCH CNT)

BASIC BOARD

TOUCH ZONES BOARD

CONNECTOR (TOUCH CNT)

BASIC BOARD

TOUCH ZONES BOARD

OMEGA

LCD module

LCD connector serial

Programming

connector

Background

debug

Basis

PCB

Imput connector

1x8

Imput zones

Touch Board

max 10 zones

Communication

connector

4 Pin Edge

3 Pin Edge

Service connector

3pin

MACS

communication

SIDEKICK

for Service

Power Board

OVC2000 or OVC3000

Tabla de contenidos

Otros manuales de Horno de Electrolux

Electrolux

Electrolux EOC6631DAX Manual de usuario

Electrolux

Electrolux KOFGH40TW Manual de usuario

Electrolux

Electrolux KVLBE08T Manual de usuario

Electrolux

Electrolux EOB 2200 BOX Instrucciones de funcionamiento

Electrolux

Electrolux EOD3S402X Manual de usuario

Electrolux

Electrolux COC826X Manual de usuario

Electrolux

Electrolux Mini Combi Oven Manual de usuario

Electrolux

Electrolux EH6L40YCN Manual de usuario

Electrolux

Electrolux KOEBP31X Manual de usuario

Electrolux

Electrolux EOB 998 Manual de usuario

Electrolux

Electrolux Built-In Dishwasher Manual de usuario

Electrolux

Electrolux EVE614 Manual de usuario

Electrolux

Electrolux EOT1513X Manual de usuario

Electrolux

Electrolux EOB 51001 Manual de operación

Electrolux

Electrolux EOCP5803AX Manual de usuario

Electrolux

Electrolux EH6L40CN Manual de usuario

Electrolux

Electrolux EEB4231 Manual de usuario

Electrolux

Electrolux DDO60CE Manual de usuario

Electrolux

Electrolux Air-O-Speed 922003 Manual de usuario

Electrolux

Electrolux OKC8H31V Manual de usuario

Electrolux

Electrolux Electric oven Manual de usuario

Electrolux

Electrolux CKB301W Manual de usuario

Electrolux

Electrolux EOB 812 Manual de usuario

Electrolux

Electrolux EOG 601 Manual de usuario

Manuales populares de Horno de otras marcas

Bosch

Bosch HVA531NS0 Manual de usuario

NEFF

NEFF B44S32 5GB Series Manual de usuario

Combi

Combi BLODGETT BC142GDS Manual de usuario

AEG

AEG COMPETENCE 311704300 Manual de usuario

Falcon

Falcon DOMINATOR PLUS G3106 Series Guía del usuario

Rational

Rational SCC WE 61G Manual de usuario

Smeg

Smeg DOSPA38X Manual de instalación y operación

Miele

Miele HR 1954-2 Manual de usuario

KHIND

KHIND OT50 Manual de usuario

Henny Penny

Henny Penny Smoker Box Manual de usuario

Lang

Lang ECOD-AP Manual de usuario

AEG

AEG BEK455310M Manual de usuario

Frigidaire

Frigidaire FNGE90JGR Manual de usuario

Hotpoint

Hotpoint FE9 S831 JSH IX Manual de usuario

GE Advantium SCB2000 Manual de usuario

AEG

AEG DE401301DM Manual de usuario

DeLonghi

DeLonghi XA660 Manual

AEG

AEG BEB331010M Manual de usuario