Electro Industries/GaugeTech Shark 200T Manual de usuario

Doc# E149704 V.1.08 QS - 1

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

Shark® 200T Transducer Quickstart Guide

CAUTION! Installation of the Shark® 200 meter must be performed only by qualified personnel who fol-

low standard safety precautions during all procedures. Those personnel should have appropriate training

and experience with high voltage devices. Appropriate safety gloves, safety glasses and protective cloth-

ing are recommended.

During normal operation of the Shark® meter, dangerous voltages flow through many parts of the unit, includ-

ing: Terminals and any connected CTs (Current Transformers) and PTs (Potential Transformers), all I/O Modules

and their circuits. All Primary and Secondary circuits can, at times, produce lethal voltages and currents. Avoid

contact with any current-carrying surfaces.

Do not use the meter or any I/O device for primary protection or in an energy-limiting capacity. The meter can

only be used as secondary protection.

IMPORTANT! Refer to your meter’s Installation and Operation Manual for additional safety warnings before

performing installation, wiring, or maintenance of your meter. See the link to the manual, below.

NOTE: This Quickstart Guide gives basic installation, wiring, and programming instructions.For additional meter opera-

tion and programming information, refer to your meter’s Installation and Operation Manual and the Communicator

PQATM, MeterManagerPQATM, and EnergyPQA.comTM Software User Manual on EIG’s website:

User Manual:

https://www.electroind.com/products/shark-200-data-logging-power-meter-transducer/

From the webpage, click Technical Documents>User Manual.

Software Manual:

https://www.electroind.com/products/communicatorpqa-software-application-5/

From the webpage, click Technical Documents>User Manual.

CommunicatorPQATM Setup Software:

https://www.electroind.com/products/communicatorpqa-software-application-5/

From the webpage, click Download ComPQA Pro. To get a Professional license for the software, email sales@elec-

troind.com or call 516-334-0870.

All EIG’s metering and software products’ literature can be accessed from:

https://www.electroind.com/all-products/

For software and metering integration, EIG’s Technical Support Engineers are available on an hourly or daily basis to

help with typical commissioning assistance, which includes:

• Verifying meter installation and wiring.

• Verifying proper system integration.

• Working with 3rd parties to ensure cross compatibility.

• Advising users on best practices for optimal implementation.

You can reach Technical Support from 8 a.m. to 8 p.m. EST, Monday-Friday, at 516-334-0870.

Doc# E149704 V.1.08 QS - 2

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

Mechanical Installation

Installation Steps:

1. Slide top groove of meter onto DIN Rail.

2. Press gently until the meter clicks into place. If mounting with DIN Rail provided, use Black Rubber

Stoppers (also provided) shown above.

To remove meter, pull down on the Release clip.

DIN Installation

200T

Dimensions

DIN Rail with black

rubber stoppers

Release Clip

v

;CM=

v

CM

Ic Ib Ia

HI HI HI

LOLOLO

v

CM

v

CM

CM



CM



v

CM

Release Clip

DIN Rail with

Black Rubber Stoppers

200 T Dimensions

Doc# E149704 V.1.08 QS - 3

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

Electrical Installation: Select diagram for your application.

Earth Ground

L(+)

Power

Supply

Connection

N(-)

L(+)

GND

N(-)

Vref

LINE

LOAD

Shorting

Block

FUSES

3 x 0.1A

FUSE

Earth Ground

L(+)

Power

Supply

Connection

N(-)

L(+)

GND

N(-)

Vref

LINE

LOAD

Shorting

Block

FUSES

3 x 0.1A

FUSE

Earth Ground

L(+)

Power

Supply

Connection

N(-)

L(+)

GND

N(-)

Vref

LINE

LOAD

Shorting

Block

FUSES

3 x 0.1A

FUSE

Earth Ground

L(+)

Power

Supply

Connection

N(-)

L(+)

GND

N(-)

Vref

LINE

LOAD

Shorting

Block

FUSES

2 x 0.1A

FUSE

WYE direct, 3

phase, 4 wire

Delta direct, 3

phase, 3 wire

WYE with PTs,

3 phase, 4 wire

Delta with PTs, 3

phase, 3 wire

Doc# E149704 V.1.08 QS - 4

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

Connect to the Meter through the RS485 Port:

The Shark® 200 meter has a standard RS485 port that makes connection between the meter and a

laptop PC very simple.The Shark®200 meter’s RS485 port uses standard 2-wire, half duplex architec-

ture.

Factory Initial Default Settings: When the Shark®200 is powered up, for 10 seconds you can

connect to the meter using the Factory Default Settings (even if the Device Profile has been changed).

After 10 seconds, the Device Profile reverts to the actual Device Profile in use. This is one way you can

always connect to the meter. The Factory Initial Default Settings are:

Device Address:1

Baud Rate:57600

Protocol:Modbus RTU

Doc# E149704 V.1.08 QS - 5

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

Follow these steps to connect to the meter via RS485:

1. Connect the meter to the PC, using an RS485 cable. EIG offers a RS485 to USB connector, which can

be ordered from EIG’s website: https://www.electroind.com/product/rs485-to-usb-communication-

-converter/.

2. Open CommunicatorPQATM software (see page QS-1 for the download link).

3. Click Connect in the Icon Bar.

4. You will see the Connect screen. Make sure

your settings match the ones shown on the right

(use pull-down menus).

5. Click Connect. The Device Status screen confirms

the connection. Click OK to close the Device Status

screen.

6. Click the Profile button on the Icon bar.

7. The Device Profile screen opens. The Tree menu on the left side of the screen lets you choose

setting screens. Click on a plus sign to view the settings

screen options.

Doc# E149704 V.1.08 QS - 6

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

Program CT, PT Ratios:

1. This is the first Device Profile screen. To

return to this screen from another set-

tings screen, click General Settings>CT,

PT Ratios and System Hookup.

2. These are the settings:

a. CT Numerator (enter value you want),

Denominator (display only), Multiplier

(1, 10, or 100), CT Fullscale (Calculated

automatically)

b. PT Numerator (enter value you want),

Denominator (enter value you want),

Multiplier (1, 10, 100, or 1000), PT Fulls-

cale (Calculated automatically)

NOTE: Voltage Full Scale = PT Numerator x PT Multiplier

Current Full Scale = CT Numerator x CT Multiplier

IMPORTANT! Specify Primary and Secondary Voltage in Full Scale (NOT Ratios).

NOTE: You can also enter the Ratios for CT/PT Numerator and Denominator and click the Update CT/

Update PT buttons to let the software calculate the Numerator, Denominator, and Multiplier for you.

You can then empty the Ratio fields and click the Update Ratio buttons to confirm the calculated set-

tings: you will see the same ratios you initially entered.

See Chapter 8 in the software manual for additional screen settings instructions (see page QS-1; alter-

natively, you can click Help>Contents from the CommunicatorPQATM software’s Main screen).

Program Communications:

1. Click General Settings>Communications.

Doc# E149704 V.1.08 QS - 7

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

2. The settings shown on the screen are the

default settings for the meter’s IrDA (COM1

and RS485 (COM2) ports. You can change the

settings, if necessary for your application. To

revert to the default RS485 port settings, click

Set COM2 to default.

NOTE: For the Shark® 200T meter, the IrDA set-

tings do not apply, since there is no IrDA port.

Program Meter Time: The meter is preset to Eastern time. To change the meter time:

1. From the Main screen’s Title bar, click Tools>Set Device Time.

2. You can either enter the time in the Time fields, or click Use

PC Time to set the time using your PC’s time.

3. Click Send.

NOTE: The meter offers multiple Time Synchronization meth-

ods. See Chapter 8, Section 8.1.2 in the software manual (see

page QS-1; alternatively, you can click Help>Contents from the

Main screen to open the manual) for instructions on setting up

Time Sync for the meter.

Program Meter Name:

To enter a name/ID for the meter:

1. From the Device Profile screen, click General Settings>System Settings.

Doc# E149704 V.1.08 QS - 8

Shark® 200T Quickstart

Electro Industries/GaugeTech

™

2. Input a new meter designation into the

field. Note that it is important to name

each meter individually, since the meter

name is used to name the log databases

when logs are downloaded.

See Chapter 8 in the software manual

for an explanation of the other settings

in this screen.

IMPORTANT! When you have made

changes to the meter’s Device Profile, click

Load Profile at the bottom of the Device Pro-

file screen to send the new settings to the

meter. The meter will reboot and then you can reconnect to it. Note that you can also click Save Profile

to save your changes without sending them to the meter.

Shark® is a registered trademark of Electro Industries/GaugeTech. CommunicatorPQATM, MeterManagerPQATM, and Ener-

gyPQA.comTM are trademarks of Electro Industries/GaugeTech.

https://electroind.com/

Tabla de contenidos

Otros manuales de Transductor de Electro Industries/GaugeTech

Electro Industries/GaugeTech

Electro Industries/GaugeTech Shark 100BT Manual de usuario

Manuales populares de Transductor de otras marcas

HBM

HBM AD101B Manual de usuario

Camille Bauer

Camille Bauer SINEAX F534 Manual de usuario

Trane

Trane KIT 16724 Instrucciones de montaje

Lumel

Lumel P18 Manual de usuario

B&C Speakers

B&C Speakers DE75PTN Manual de usuario

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Manual

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Manual de usuario

ProMinent

ProMinent Dulcometer DMT Manual de usuario

MKS

MKS MicroPirani 925 Series Cómo utilizar

WIKA

WIKA WU-20 Manual de usuario

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Manual de usuario

Camille Bauer

Camille Bauer SIRAX CH-5610 Manual de usuario

WIKA

WIKA F2802 Manual de usuario

Veris Industries

Veris Industries PW Series Manual de usuario

HBM

HBM TJ1-S6 Manual de usuario

Simrad

Simrad ES120-7C - REV D Guía del usuario

HBM

HBM C18 Manual de usuario

Airmar

Airmar M260 Manual de instrucciones